Grain Refinement by Cyclic Displacive Forward/Reverse Transformation in Fe-High-Ni Alloys

A novel method for grain refinement of martensite structures was proposed, in which transformation strain is accumulated by cyclic displacive forward and reverse transformations. This method can refine martensite structures in an Fe-18Ni alloy because a high density of austenite dislocations is introduced by a displacive reverse transformation in addition to an inheritance of dislocations in body-centered cubic martensite into austenite during cyclic transformation. The addition of a small amount of carbon accelerates structure refinement significantly, which results in the formation of ultra-fine-grained structures after ten cycles.

     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

Effects of fermentation conditions and soybean peptide supplementation on hyaluronic acid production by Streptococcus thermophilus strain YIT 2084 in milk

To increase the hyaluronic acid (HA) yield from Streptococcus thermophilus YIT 2084, fermentation conditions (pH, temperature, agitation, aeration) were optimized in milk-based medium, and the effects of supplemental soybean peptides, which have different molecular weight distributions, were determined. HA production was enhanced to approximately 100 mg/l at pH 6.8 and 33–40 °C. Agitation speed and aeration rate slightly affected HA production. Soybean peptides including those of high molecular weight (approximately 27 to 130 kDa) further increased HA production to 208 mg/l under the optimal condition (pH 6.8, 35 °C, 100 rpm), which was 20-fold greater than non-optimal condition. HA production was no longer related to the specific growth rate. The HA produced under the optimal condition included a large amount of high-molecular-weight fraction of 100 to 2000 kDa, compared with under the basal condition without optimization.     

Thermomechanical characterization of β-stabilized Ti–45Al–7Nb–0.4W–0.15B alloy

The correlation between hot deformation parameters and the workability of β-stabilized Ti–45Al–7Nb–0.4W–0.15B (at. %) alloy was studied in the temperature range 1000–1200 °C and the strain rate range 0.001–1 s^?1. Deformation mechanisms were characterized by detailed analyses of the deformation behavior and microstructural observations. The results indicate that the deformation and recrystallization occurred preferentially in the grain boundary β phases because its good high temperature deformability enhances grain boundary sliding and migration, and thus improves the workability. Decomposition of the β phase to α₂ and γ phases partly accommodates the stress concentration and is thus beneficial in hot deformation. Appropriate deformation processing parameters were suggested based on the processing map, and were successfully applied in the quasi-isothermal canned forging of industrial-scale billets.     

Isotope dilution analysis of Se in human blood serum by using high-power nitrogen microwave-induced plasma mass spectrometry coupled with a hydride generation technique

To establish a method for sensitive, accurate, and precise determination of Se in real samples, isotope dilution analysis using high-power nitrogen microwave-induced plasma mass spectrometry (N2 MIP-IDMS) was conducted. In this study, freeze-dried human blood serum (Standard Reference Material, NIES No. 4) provided by NIES (National Institute for Environmental Studies) was used as a real sample. The measured isotopes of Se were 78Se and 80Se which are the major isotopes of Se. The appropriate amount of a Se spike solution was theoretically calculated by using an error multiplication factor (F) and was confirmed experimentally for the isotope dilution analysis. The mass discrimination effect was corrected for by using a standard Se solution for the measurement of Se isotope ratios in the spiked sample. However, the sensitivity for the detection of Se was not so good and the precision of the determination was not improved (2-3%) by N2 MIP-IDMS with use of the conventional nebulizer. Therefore, a hydride generation system was connected to N2 MIP-IDMS as a sample introduction system (HG-N2 MIP-IDMS) in order to establish a more sensitive detection and a more precise determination of Se. A detection limit (3 sigma) of 10 pg mL-1 could be achieved, and the RSD was less than 1% at the concentration level of 5.0-10.0 ng mL-1 by HG-N2 MIP-IDMS. The analytical results were found to be in a good agreement with those obtained by the standard addition method using conventional Ar ICPMS.     

Sensory nerve fibres from lumbar intervertebral discs pass through rami communicantes. A possible pathway for discogenic low back pain

It has been thought that lumbar intervertebral discs were innervated segmentally. We have previously shown that the L5-L6 intervertebral disc in the rat is innervated bilaterally from the L1 and L2 dorsal root ganglia through the paravertebral sympathetic trunks, but the pathways between the disc and the paravertebral sympathetic trunks were unknown. We have now studied the spines of 17 rats to elucidate the exact pathways. We examined serial sections of the lumbar spine using immunohistochemistry for calcitonin gene-related peptide, a sensory nerve marker. We showed that these nerve fibres from the intervertebral disc ran through the sinuvertebral nerve into the rami communicantes, not into the corresponding segmental spinal nerve. In the rat, sensory information from the lumbar intervertebral discs is conducted through rami communicantes. If this innervation pattern applies to man, simple decompression of the corresponding nerve root will not relieve discogenic pain. Anterior interbody fusion, with the denervation of rami communicantes, may be effective for such low back pain.     

Endoscopic sphincterotomy and laparoscopic cholecystectomy in an infant with cholecysto-choledocholithiasis

Laparoscopic cholecystectomy (LC) and endoscopic sphincterotomy (EST) are widely accepted procedures for cholecysto-choledocholithiasis in adults. However, their use in infants has not been reported. An 8-month-old girl presented with high fever and obstructive jaundice. Ultrasound scan showed acute cholecystitis with stones in the bile duct. After 2-week-long antibiotic therapy the acute cholecystitis and hepatic impairment resolved. An endoscopic retrograde cholangiopancreatography (ERCP) confirmed choledocholithiasis and cholecystolithiasis. Risk factors for the development of biliary calculi were not detected. One month after the restoration of her liver function, she underwent EST using a side-viewing endoscope with a small sphincterotome. A common bile duct stone was extracted using a basket catheter. LC was then carried out. The time interval between the EST and LC was 34 days. No complications have been noted for 6 months.     

Human buprenorphine N-dealkylation is catalyzed by cytochrome P450 3A4

Buprenorphine (BN) is a thebaine derivative with analgesic properties. To identify and characterize the cytochrome P450 (CYP) enzyme(s) involved in BN N-dealkylation, in vitro studies using human liver microsomes and recombinant human CYP enzymes were performed. Norbuprenorphine formation from BN was measured by a simple HPLC-UV assay method, without extraction. The BN N-dealkylation activities in 10 human liver microsomal preparations were strongly correlated with microsomal CYP3A-specific metabolic reactions, i.e. triazolam 1'-hydroxylation (r = 0.954), midazolam 1'-hydroxylation (r = 0.928), and testosterone 6beta-hydroxylation (r = 0.897). Among the eight recombinant CYP enzymes studied (CYP1A2, CYP2A6, CYP2B6, CYP2C9, CYP2C19, CYP2D6, CYP2E1, and CYP3A4), only CYP3A4 could catalyze BN N-dealkylation. The apparent KM value for recombinant CYP3A4 was similar to that for human liver microsomes (23.7 vs. 39.3 +/- 9.2 microM). The demonstration of BN N-dealkylation by recombinant CYP3A4 and the agreement in the affinities (apparent KM values) of human liver microsomes and recombinant CYP3A4 provide the most supportive evidence for BN N-dealkylation being catalyzed by CYP3A4.