水热法制备纳米尖晶石型NiFe_2O_4及表征

分别采用水热法、共沉淀法合成了纳米尖晶石型铁氧体—NiFe2O4晶体,对两种方法所合成的样品进行了比较,分析了不同合成方法的优缺点,确定水热法为比较适宜的合成该类复合氧化物的方法,该法合成的NiFe2O4晶体的平均粒径仅为15.9nm,且粒度分布十分均匀。此外,通过对实验结果的测定与分析探讨了影响水热制备的几种可能的因素,确定了水热合成的适宜的沉淀剂为NaOH溶液,水热合成适宜的温度为200℃。     

Self-assembly and crystallization behavior of a double-crystalline polyethylene-block-poly(ethylene oxide) diblock copolymer

The self-assembly and crystallization behavior of a well-defined low molecular weight polyethylene-block-poly(ethylene oxide) (PE-b-PEO) diblock copolymer was studied. The number-average degrees of polymerization for the PE and PEO blocks were 29 and 20, respectively. The molecular weight distribution was 1.04 as determined by size-exclusion chromatography. The PE-b-PEO sample exhibited two melting points at 28.7 and 97.4 °C for the PEO and the PE crystals, respectively. The crystallization of the PE blocks was unconfined, while the crystallization of the PEO blocks was confined between pre-existing PE crystalline lamellae, as demonstrated by simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) studies. In the fully crystalline state, both PE and PEO blocks formed extended-chain crystals with PE chains tilted ∼22° from the lamellar normal and PEO chains parallel to the lamellar normal, as evidenced by two-dimensional WAXD study of shear-oriented samples. Regardless of hydrogen bonding among hydroxyl chain ends in the PEO blocks, interdigitated, single-crystalline layer morphology was observed for both PE and PEO crystals. The partial crystalline morphology, where the PE crystallizes and the PEO is amorphous, had the same overall d-spacing as the fully crystalline morphology. A double-amorphous PEO layer sandwiched between neighboring PE crystalline layers was deduced based on a chain conformation study using Fourier transform infrared. The confined crystallization kinetics for PEO blocks was investigated by differential scanning calorimetry, which could be explained by a heterogeneous nucleation mechanism. The slower crystallization rate in the PEO-block than the same molecular weight homopolymer was attributed to the effects of nanoconfinement and PEO chains tethered to the PE crystals.     

水解酸化-好氧生物法处理工业废水

水解酸化—好氧生物处理法是近年提出的一种新型处理工业废水的方法。列举了水解酸化工序在生物处理工业废水中的优点，并就其在啤酒废水、屠宰废水、乳品废水、制浆废水以及制药废水中的应用作了介绍。     

闪蒸法聚乙烯无纺布的研究进展

介绍了无纺布的发展历程以及我国无纺布的现状，着重讨论了开展闪蒸法聚乙烯纺粘型无纺布研究的意义、方法、生产工艺。     

用模糊规划证明期望放出体的合理性

文章采用模糊规划的方法证明了期望放出体在放矿中的合理性,从而使放矿这个复杂的过程能方便地采用数学手段来处理。同时说明了如何在崩落法矿山利用期望体来解决实际生产中的放矿问题。     

玻璃含硫气泡与配合料的关系

借助拉曼光谱、原料C当量数测定及SC-132定硫仪分析等方法对玻璃气泡、配合料Redox数及硫溶解度之间的关系进行了研究.     

生活污水浊度与化学需氧量的关系

试验选用三种不同的生活污水,对其浊度和CODCr进行测定及相关分析.分析结果表明:当污水浊度低时,CODCr也低;当污水浊度高时,CODCr也高,这三种污水各自的浊度和CODCr都存在较好的相关性.这样便可用易于测定的浊度来间接反映污水的CODCr和BOD5,从而判断污水的污染程度和处理效果.     

紫外光固化胶粘剂的粘接性能研究

本研究采用三种丙烯酸酯单体(M01、M02、M03)和一种紫外光引发剂(I01)配制了紫外光固化胶粘剂,探讨了不同原料配比对产品拉伸剪切强度的影响。实验结果表明:当原料配比为M01:2.07mmol、M02:7.02mmol、M03:13.7mmol、I01:0.585mmol时产品的拉伸剪切强度较好。