能效优先的用户关联与功率控制协同优化机制

在异构蜂窝网络中,针对系统的能效,提出了一种基于效用函数最大化模型的用户关联与功率控制协同优化方案,该方案表示为非线性混合整数问题。为了求得该问题的最优解,设计了一种迭代算法,首先将原问题转换为带参数的多项式形式的问题,在外层循环利用Dinkelbach方法求得最佳的能效因子,然后在内层循环分别求得最佳的用户关联矩阵和传输功率。最终实验结果表明,用户关联与功率控制协同的优化方案在能效和负载平衡方面比固定功率条件下的用户关联策略的性能更优。     

湿式氧化处理乙烯裂解废碱液

文章研究了WAO处理乙烯裂解废碱液的方法。在2L高压釜中进行了乙烯废碱液的湿式氧化实验研究，重点考察了反应温度、停留时间对乙烯废碱液中COD、S^2-,酚的含量的影响。结果表明，湿式氧化处理乙烯裂解废碱液是可行的，处理后污水中COD、S^2-,酚的去除率分别达到40％、98％和30％，达到了排放标准。     

新一代喷涂聚脲路面标线涂料

简述了国内路标漆的发展概况,介绍了聚天冬氨酸酯聚脲路标漆的原理、配方及应用性能。针对目前国内各种路标漆的优缺点,将聚天冬氨酸酯聚脲路标漆与它们进行比较,发现聚天冬氨酸酯聚脲路标漆具有快干、耐磨、反光效果好、施工速度快、重涂性好等优点,特别适用于路面标线涂料的应用。     

Free energy calculations of the mutation of Ile96 -> Ala in barnase: contributions to the difference in stability

Free energy calculations were carried out to determine the relativeunfolding free energy of the Ile96 wild type and Ala96 mutantbarnases. The total calculated free energies suggest that substitutionof Ile96 with Ala destabilizes barnase by 3.9 kcal/mol, whichis in good agreement with the independently determined experimentalvalues of 4.0 and 3.3 kcal/mol and a previous simulation. However,a decomposition of the free energy finds the dominant contributionsto this free energy arising from the noncovalent Interactionsbetween the perturbed group and distant residues of barnasein the sequence and water molecules and only a very small contributionfrom covalent interactions. This is in contrast to the previoussimulation, using the dual topology methodology, which produceda decomposition with an {small tilde}60% free energy contributionfrom changes in covalent interactions. The use of the singletopology employed in the present calculations and the dual topologyemployed in the previous study are analyzed in order to understandthe contrast between the present results and the results ofthe previous study.     

速溶硅酸钠的生产与应用

速溶硅酸钠属粉状无定形多硅酸钠，因易溶于水，故称速溶硅酸钠。将液体硅酸钠用烧碱调整模数后，经喷雾干燥瞬间脱水而制得。生产工艺简单，易实现自动化操作，产品指标要求高，生产中必须严格控制工艺条件。速溶硅酸钠主要作为建材助剂用于电力建设中，如：电厂烟囱、锅炉、烟道内衬砌筑用的耐酸耐热胶泥材料；还广泛用于大型设备的耐酸防腐中，如：化工、冶金行业耐酸槽内衬用的耐酸胶泥材料，还可添加在粉煤灰水泥材料中作为助磨剂和粉煤灰的活化剂。随着经济的发展，速溶硅酸钠需求量越来越大，已引起建材与化工界的重视。     

CaO–ZrO2 Solid Solution: A Highly Stable Catalyst for the Synthesis of Dimethyl Carbonate from Propylene Carbonate and Methanol

CaO–ZrO₂ prepared by co-precipitation showed to be a well-performed catalyst for the transesterification of propylene carbonate (PC) and methanol. The characterization by X-ray powered diffraction (XRD) and Raman spectroscopy indicated that CaO was doped into the lattice of ZrO₂ to form CaO–ZrO₂ solid solution. Such a solid solution was a strong solid base, which was proved by CO₂ temperature program desorption (CO₂-TPD). As a result, the catalyst showed high stability towards the transesterification of propylene carbonate and methanol into dimethyl carbonate with high PC conversion, especially being subjected to the continuous production of dimethyl carbonate at reactive distillation reactor for 250 h without any obvious loss of activity at the PC conversion of 95%.     

金属间化合物的研究现状及其最新发展趋势

主要介绍了金属间化合物的概念、发展历程、研究现状及几种常用金属间化合物的发展状况，并提出了该类材料的最新发展趋势。     

中东及周边主要国家和地区乙烯工业发展对我国的影响

对中东及周边国家和地区的石化工业总体情况做了简要介绍，并对主要国这和地区的乙烯工业现状、发展趋势及特点进行了分析和预测，同时就其对我国的影响提出了建议和对策。     

聚合工艺和组成对苯丙乳液最低成膜温度的影响

通过对不同聚合工艺和组成制得的苯丙聚合物乳液 ,测其最低成膜温度 (MFT) ,结果发现 :利用种子乳液聚合 ,核主要组成为聚苯乙烯 ,壳主要组成为聚丙烯酸丁酯 ,所制得的核壳聚合物乳液与同组成无规共聚所得乳液相比 ,MFT能下降 2 5℃左右。其意义有二 :( 1 )该乳液可在较低温度下使用 ,从而拓宽了施工温度范围。 ( 2 )若制得与常规共聚乳液相同MFT时 ,该方法所制得的乳液由于可少用价格高昂的丙烯酸丁酯 ,多用价廉的苯乙烯 ,从而降低乳液成本 ,使该类产品具有较强的市场竞争力。     

Designing amino acid sequences to fold with good hydrophobic cores

We present two methods for designing amino acid sequences ofproteins that will fold to have good hydrophobic cores. Giventhe coordinates of the desired target protein or polymer structure,the methods generate sequences of hydrophobic (H) and polar(P) monomers that are intended to fold to these structures.One method designs hydrophobic inside, polar outside; the otherminimizes an energy function in a sequence evolution process.The sequences generated by these methods agree at the levelof 60–80% of the sequence positions in 20 proteins inthe Protein Data Bank. A major challenge in protein design isto create sequences that can fold uniquely, i.e. to a singleconformation rather than to many. While an earlier lattice-basedsequence evolution method was shown not to design unique folders,our method generates unique folders in lattice model tests.These methods may also be useful in designing other types offoldable polymer not based on amino acids