The confused world of sulfate attack on concrete

External sulfate attack is not completely understood. Part I identifies the issues involved, pointing out disagreements, and distinguishes between the mere occurrence of chemical reactions of sulfates with hydrated cement paste and the damage or deterioration of concrete; only the latter are taken to represent sulfate attack. Furthermore, sulfate attack is defined as deleterious action involving sulfate ions; if the reaction is physical, then, it is physical sulfate attack that takes place. The discussion of the two forms of sulfate attack leads to a recommendation for distinct nomenclature. Sulfate attack on concrete structures in service is not widespread, and the amount of laboratory-based research seems to be disproportionately large. The mechanisms of attack by different sulfates—sodium, calcium, and magnesium—are discussed, including the issue of topochemical and through-solution reactions. The specific aspects of the action of magnesium sulfate are discussed, and the differences between laboratory conditions and field exposure are pointed out.Part II discusses the progress of sulfate attack and its manifestations. This is followed by a discussion of making sulfate-resisting concrete. One of the measures is to use Type V cement, and this topic is extensively discussed. Likewise, the influence of w/c on sulfate resistance is considered. The two parameters are not independent of one another. Moreover, the cation in the sulfate salt has a strong bearing on the efficiency of the Type V cement. Recent interpretations of the Bureau of Reclamation tests, both long term and accelerated, are evaluated, and it appears that they need reworking.Part III reviews the standards and guides for the classification of the severity of exposure of structures to sulfates and points out the lack of calibration of the various classes of exposure. A particular problem is the classification of soils because much depends on the extraction ratio of sulfate in the soil: there is a need for a standardized approach. Taking soil samples is discussed, with particular reference to interpreting highly variable contents of sulfates. The consequences of disturbed drainage of the soil adjacent to foundations and of excessive irrigation, coupled with the use of fertilizer, are described. Whether concrete has undergone sulfate attack can be established by determining the change in the compressive strength since the time of placing the concrete. The rejection of this method and the reliance on determining the tensile strength of concrete because of “layered damage” are erroneous. Scanning electron microscopy (SEM) should not be the primary, and certainly not the first, method of determining whether sulfate attack has occurred. Mathematical modeling will be of help in the future but, at present, cannot provide guidance on the sulfate resistance of concrete in structures.Part IV presents conclusions and an overview of the situation, with consideration of future improvements. Appendix A contains the classification of exposure to sulfate given by various codes and guides.     

Assessment of health hazard associated with nitrogen compounds in water

This paper presents results of analyses of water in the river Ma?a Panew in South West Poland flowing through a rural area with some chemical industry developed. The aims of the work were to investigate the pollutants level in the river, compare the obtained results with obligatory drinking water standards and determine possible health effects when using the river as a source for drinking water production. Attention was given to nitrogen compounds as nitrate(V) ions (NO(3-)) and nitrite(III) ions (NO(2-)), mostly of anthropogenic origin, were detected in the monitored water. The average concentrations of NO(3-) and NO(2-) were 3.54 and 0.286 mg/dm(3), respectively. The chances for non-carcinogenic effects, namely methemoglobinemia, resulting from possible exposure to the examined chemicals were determined based on the analytical and toxicological data. As infants are the sub-population most susceptible to nitrate-induced methemoglobinemia, the assessment was limited to children aged 0-3 years. The determined values expressed by hazard quotient (HQ) and hazard index (HI) indicate that the water pollutants and their concentrations do not exceed unity; however, in the case of infants, the other nitrate sources should be controlled.     

Light on! Real world evaluation of a P300-based brain-computer interface (BCI) for environment control in a smart home

Brain-computer interface (BCI) systems aim to enable interaction with other people and the environment without muscular activation by the exploitation of changes in brain signals due to the execution of cognitive tasks. In this context, the visual P300 potential appears suited to control smart homes through BCI spellers. The aim of this work is to evaluate whether the widely used character-speller is more sustainable than an icon-based one, designed to operate smart home environment or to communicate moods and needs. Nine subjects with neurodegenerative diseases and no BCI experience used both speller types in a real smart home environment. User experience during BCI tasks was evaluated recording concurrent physiological signals. Usability was assessed for each speller type immediately after use. Classification accuracy was lower for the icon-speller, which was also more attention demanding. However, in subjective evaluations, the effect of a real feedback partially counterbalanced the difficulty in BCI use. PRACTITIONER SUMMARY: Since inclusive BCIs require to consider interface sustainability, we evaluated different ergonomic aspects of the interaction of disabled users with a character-speller (goal: word spelling) and an icon-speller (goal: operating a real smart home). We found the first one as more sustainable in terms of accuracy and cognitive effort.     

Decentralized fault detection and diagnosis via sparse PCA based decomposition and Maximum Entropy decision fusion

This paper proposes an approach for decentralized fault detection and diagnosis in process monitoring sensor networks. The sensor network is decomposed into multiple, potentially overlapping, blocks using the Sparse Principal Component Analysis algorithm. Local predictions are generated at each block using Support Vector Machine classifiers. The local predictions are then fused via a Maximum Entropy algorithm. Empirical studies on the benchmark Tennessee Eastman Process data demonstrated that the proposed decentralized approach achieves accuracy comparable to that of the fully centralized approach, while offering benefits in terms of fault tolerance, reusability, and scalability.     

汽车钢板回收冶炼过程中涂覆油漆的裂变行为

采用单光子离子化/共振增强的多光子离子化-飞行时间质谱法(SPI/REMPI-TOFMS)研究了在汽车钢板的回收冶炼过程中,涂覆油漆的裂变行为.在模拟实验装置中,在线跟踪监测了裂解炉气中的有机裂变产物的演变过程.发现与其它有机材料不同,汽车钢板的涂覆油漆不仅在合成空气中,而且在氮气中也产生酚类有机污染物.从300 ℃到1 190 ℃都有多环芳烃(PAHs)产生,但在700～800 ℃时,产生的数量最多,在1 000～1 190 ℃,趋于完全燃烧.     

Results demonstrating techniques for enhancing electrochemical reactions involving iron oxide in slags and C in liquid iron

Two techniques are described for the enhancement of the kinetics of reduction of iron oxide from slags by carbon in molten iron. Laboratory experiments have shown that the rate of iron oxide reduction by carbon-saturated iron can be increased by 5 to 10 times when the reaction is carried out under a reduced-pressure atmosphere. This effect is thought to be the result of the increased volumetric gas evolution through the slag layer and the associated increase in slag stirring. A model is presented, which relates the mass-transfer coefficient for ferrous ions in the slag to its stirring that is controlled by varying the ambient pressure. Additional laboratory experiments examined the electrochemical nature of iron oxide reduction from slag by carbon in liquid iron. Results indicate that the reduction of iron oxide from slag is increased in the presence of an applied electric field. The external circuit allows for the separation of the half-cell reactions associated with iron oxide reduction and decarburization and increases the reaction area available for the individual reactions. These results have significant implications for several important slag metal reactions, which occur during ironmaking and steelmaking operations.     

Instrumental Learning Within the Rat Spinal Cord: Localization of the Essential Neural Circuit.

Following spinal transection of the upper thoracic spinal cord, male Sprague-Dawley rats given legshock whenever a hindlimb is extended learn to maintain the leg in a flexed position. The region of the cord that mediates this instrumental learning was isolated using neuroanatomical tracing, localized infusion of lidocaine, and surgical transections. DiI and Fluoro-Gold microinjection at the site of shock application labeled motor neuron bodies of lamina IX in the lower lumbar region. Local application of the Na++ channel blocker lidocaine disrupted learning when it was applied over a region extending from the lower lumbar (L3) to upper sacral (S2) cord. The drug had no effect rostral or caudal to this region. Surgical transections as low as L4 had no effect on learning. Learning also survived a dual transection at L4 and S3, but not L4 and S2. The results suggest that the essential neural circuit lies between L4 and S3. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the cultural guises of cognitive dissonance: The case of Easterners and Westerners.

Cognitive dissonance and effects of self-affirmation on dissonance arousal were examined cross-culturally. In Studies 1 and 2, European Canadians justified their choices more when they made them for themselves, whereas Asian Canadians (Study 1) or Japanese (Study 2) justified their choices more when they made them for a friend. In Study 3, an interdependent self-affirmation reduced dissonance for Asian Canadians but not for European Canadians. In Study 4, when Asian Canadians made choices for a friend, an independent self-affirmation reduced dissonance for bicultural Asian Canadians but not for monocultural Asian Canadians. These studies demonstrate that both Easterners and Westerners can experience dissonance, but culture shapes the situations in which dissonance is aroused and reduced. Implications of these cultural differences for theories of cognitive dissonance and self-affirmation are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Analysis of fluid flow and energy transport in Czochralski's process

In this paper the conjugate fluid flow and energy transport problem (involving conduction-convection-radiation heat transfer) resulting from the Czochralski crystal growth process is analysed. The solidifying material is treated as a pure and semitransparent substance with material properties depending neither on temperature nor on the wavelength. The solution of the problem is obtained iteratively using two computer codes: FLUENT, a commercial CFD package, and BEM-based in-house code capable of analysing the radiative heat transfer in the entire computational domain.Obtained results not only show velocity field and temperature distribution within the bodies under consideration but also demonstrate the influence of thermal radiation on these quantities.     

Stress dependence of sensitivity of fluxgate sensor

This paper presents results of investigation of the stress sensitivity of the fluxgate sensor with amorphous alloy (CoFe)₈₉(MnMoSiB)₁₁ (Vitrovac 6150F) ring core. Stress was applied in two directions: perpendicularly to the flux density in the ring core or in the direction of diameter of the ring. The influence of mechanical stress from the external forces on magnetic properties of this ring core was measured. Then results of this testing were used in computer simulation of the influence of the stress on the output signal of the fluxgate sensor.