基于开关电流技术的连续小波变换的实现方法

开关电流技术是一种新的模拟抽样数据处理技术。开关电流电路具有一般电路不具有的优点，与标准数字CMOS工艺兼容。连续小波变换是分析非平稳信号的有力工具，在信号处理上有广泛的应用。本文提出用开关电流技术实现连续小波变换的方法，并用Matlab仿真证明了其理论可行性。     

用两次键合技术制备均匀单晶硅膜

硅直接键合(SDB)技术用于制备SOI片(BESOI)是键合技术的最重要应用之一,研究了制备BESOI片中的键合和减薄问题,获得了大面积的均匀单晶硅膜,通过实验分析了这种方法获得的薄膜的平整度和影响因素。并针对压力传感器的敏感膜,通过两次键合及SOI自停止腐蚀成功制备了厚度可控的均匀单晶硅薄膜,硅膜表面质量优良,平整度在±0.15μm的范围内。     

抽油机井泵系统效率与排量系数的关系研究

根据泵系统效率和排量系数的定义，导出了泵系统效率和排量系数之间的数学关系式。通过理论分析确定了影响泵系统效率和排量系数关系的主要因素，并对不同抽汲参数和生产气油比条件下的泵系统效率和排量系数进行了数值计算，分别绘制了泵系统效率和排量系数与冲程、冲次及生产气油比的关系图，明晰了泵系统效率和排量系数的关系。     

DMT系统中一种易于实现的时域均衡器

总结了DMT系统中时域均衡器(TEQ)的主要设计方法，指出最大缩短信噪比(MSSNR)TEQ的最优设计方法很难实时实现。提出了一种MSSNR TEQ的次优设计方法，它首先估计出目标抽样窗的最优延迟，然后用分步求解法求出TEQ的抽头系数。和最优方法相比，次优方法的计算量大幅度减少，可实时实现，而其缩短信噪比的损失很小。仿真实验验证了次优方法的有效性。     

纺织工业厂房设计类型浅探

总结了目前几种常见类型纺织厂房的特点，进行了技术经济指标对比，建议性地指出目前纺织工业厂房设计的方向。     

粗粒土渗透变形机制浅析

对砂卵砾石的渗透变形的形成条件进行了简要分析，在此基础上对渗透变形的形式进行了简要评价，并提出了渗透变形临界坡降的计算方法。     

Analysis of 24,444 surgical specimens accessioned over 55 years in an ophthalmic pathology laboratory

PURPOSE: To summarize the pathologic diagnoses of a large number of surgically-obtained specimens over an extended time period in a single ophthalmic pathology laboratory. METHODS: We analyzed the records of 24,444 surgically obtained specimens accessioned in the L.F. Montgomery Ophthalmic Pathology Laboratory, Emory University, Atlanta, GA between May 1941 and December 1995. Age, sex, topography, clinical procedure, and histologic diagnosis were entered into a database using the modified SNOMED coding system. The diagnosis of the surgically enucleated eyes were analyzed with respect to years of enucleation. RESULTS: The most common topographic area associated with a histologic diagnosis was the cornea (39.3%), followed by lens (16.0%), vitreous (12.0%), uvea (9.8%), eyelids (8.0%), conjunctiva (7.7%), retina (7.7%), and orbit (2.1%). The relative proportion of vitreous specimens has continuously increased and became the most common surgical specimen in 1995. The most common underlying disease of surgically enucleated eyes is trauma (40.9%), followed by ocular neoplasia (24.2%), 'surgical' diseases of the cornea, lens and retina including glaucoma (17.3%), vascular diseases (6.7%), and inflammatory conditions (6.7%). The relative frequency of trauma and ocular inflammation as a cause of enucleation decreased significantly (p < 0.05) over the time of the study period while the relative proportion of ocular neoplastic processes increased (p < 0.0001). CONCLUSIONS: The availability of new surgical techniques has caused a change in the relative frequencies of different ocular specimens submitted for histologic examination.     

Grain Boundary Sliding in Fatigue of Pure Aluminum

The distributions of plastic strain near grain boundaries induced by fatigue loading were investigatedby the fiducial grid method in pure aluminum specimens, and the resulted grain boundary sliding(GBS) was systematically analysed. The results show that the strain field near a grain boundary isnonuniform. GBS is restricted by the junction of grain boundaries and causes discontinuities of bothdisplacement and strain. A peak value of shear strain was created in short-range area across the grainboundary. GBS plays an important role in cyclic softening and secondary hardening. The control fac-tor of GBS is the relative orientation between two grains and the macro orientation of the grainboundary rather than the ∑ value of the boundary.     

TK406H侧钻短半径水平井钻井工艺技术

TK40 6H侧钻短半径水平井是西北石油局在塔河油田利用已钻无产能直井井眼侧钻钻水平井而布署的第一批短半径水平井 ,也是国内目前已钻的最深的短半径水平井 ,设计侧钻造斜井深在 5 30 0m以下 ,施工难度大 ,该批短半径水平井的钻成并获得良好的产能 ,使国内水平井钻井技术迈上了新的台阶。本文主要从该油田短半径水平井钻井的技术难点入手 ,对TK40 6H侧钻短半径水平井的设计和施工进行了分析和阐述 ,并通过主要工艺技术分析 ,阐明了技术实施的着眼点和配套的技术措施     

俄罗斯陶瓷及其金属化技术的研究

采用X射线荧光、X射线衍射、金相显微镜和扫描电镜等分析方法 ,通过对微波管陶瓷材料的理化分析 ,对俄罗斯陶瓷及其金属化技术进行了研究 ,并对化学成分和显微结构对性能的影响作了初步的讨论。