Potential Antitumor Effects of 6-Gingerol in p53-Dependent Mitochondrial Apoptosis and Inhibition of Tumor Sphere Formation in Breast Cancer Cells

Hormone-specific anticancer drugs for breast cancer treatment can cause serious side effects. Thus, treatment with natural compounds has been considered a better approach as this minimizes side effects and has multiple targets. 6-Gingerol is an active polyphenol in ginger with various modalities, including anticancer activity, although its mechanism of action remains unknown. Increases in the level of reactive oxygen species (ROS) can lead to DNA damage and the induction of DNA damage response (DDR) mechanism, leading to cell cycle arrest apoptosis and tumorsphere suppression. Epidermal growth factor receptor (EGFR) promotes tumor growth by stimulating signaling of downstream targets that in turn activates tumor protein 53 (p53) to promote apoptosis. Here we assessed the effect of 6-gingerol treatment on MDA-MB-231 and MCF-7 breast cancer cell lines. 6-Gingerol induced cellular and mitochondrial ROS that elevated DDR through ataxia-telangiectasia mutated and p53 activation. 6-Gingerol also induced G0/G1 cell cycle arrest and mitochondrial apoptosis by mediating the BAX/BCL-2 ratio and release of cytochrome c. It also exhibited a suppression ability of tumorsphere formation in breast cancer cells. EGFR/Src/STAT3 signaling was also determined to be responsible for p53 activation and that 6-gingerol induced p53-dependent intrinsic apoptosis in breast cancer cells. Therefore, 6-gingerol may be used as a candidate drug against hormone-dependent breast cancer cells.     

Facile Fabrication of Povidone Iodine-Embedded Polytetrafluoroethylene Superhydrophobic Films with Improved Antiadhesive and Bactericidal Properties in Bacterial Environments

It remains a challenge to maintain the antiadhesion properties of superhydrophobic films after exposure to bacterial environments. In this work, superhydrophobic bactericidal polymer films via the simple incorporation of polyvinylpyrrolidone-iodine (PVP-I) or iodine into polytetrafluoroethylene (PTFE) are fabricated to improve their antiadhesive and antibacterial capability. Superhydrophobic iodine-embedded films, polytetrafluoroethylene/polyvinylpyrrolidone-iodine and polytetrafluoroethylene-iodine (PTFE/PVP-I and PTFE-I), show excellent antiadhesive and bactericidal performances even post exposure to bacterial solutions as compared to iodine-free counterparts by controlling the release of iodine. Especially, superhydrophobic PTFE/PVP-I films display a more sustained iodine release profile and significant antibacterial properties against gram-positive (S. aureus, methicillin-resistant S. aureus (MRSA)) and gram-negative (E. coli) bacteria. Such a facile combination of antiseptic agents and superhydrophobic surface could be widely used for antiseptic biomedical applications.     

A replacement of traditional insulation refractory brick by a waste-derived lightweight refractory castable

Lightweight insulation refractories are essential for high-temperature performance to reduce energy consumption. This study investigates a new insulation material, that is, solid waste rice husk ash (RHA) derived lightweight refractory castable, replacing traditional insulation refractory brick. The RHA is generated after the burning of rice husk as biomass fuel. The RHA is used as an aggregate and alkali-extracted silica sol from RHA as a binder to fabricate the insulation castable. The nanosilica containing (~30 wt%) sol is employed to synthesize the refractory castable by varying the sol amount (2.5-12.5 wt% silica from sol). The castable specimens are cast by a vibro-caster and fired at 900-1200°C in a muffle furnace. The physic-mechanical and thermal conductivity (κ) of the castable is investigated. At 1100°C with 10 wt% dry sol retaining sample shows an excellent apparent porosity (~65%), low bulk density (~ 0.8 g/cm³), and κ (0.136 W/m k) with sustainable compressive strength (6 MPa). The acquired results are a good match with the literature (other wastes-derived insulation materials) and industrial (silica insulation brick) obtained data. These promising outcomes may inspire the refractory industries for using RHA as an aggregate and RHA extracted sol as a binder for making insulation castable.     

Morphology and activity of nanosized NdCl3 catalyst for 1,3‐butadiene polymerization

The binary lanthanide catalyst for 1,3‐butadiene was invented for 40 years ago. However, it has not been employed in commercial application due to its poor solubility and low activity. Nanosized neodymium chloride (NdCl₃) was prepared in tetrahydrofuran (THF) medium through dissolution, chelation, and colloidal formation steps. Anhydrous NdCl₃ was dissolved in THF, and ca. 1.5 THF molecules were coordinated. In the colloidal formation step, THF was slowly replaced with the addition of cyclohexane, and pale blue nuclei, nanosize below 200 nm, were formed. The structural studies for NdCl₃ · xTHF using X‐ray powder diffraction (XRD) and scanning electron microscope (SEM) indicate that high ordered crystallinity is decreased with reduced particle size from trigonal prismatic to porous sphere structure. Nano NdCl₃, obtained as colloidal state in cyclohexane, was activated with Al(iBu)₃ and Al(iBu)₂H at room temperature and employed for 1,3‐butadiene solution polymerization. The nanosized Nd catalysts showed high activity (1.0 ～ 1.3 × 10⁵ g/Nd mol · h), which is comparable to that of the ternary neodymium catalyst Nd(neodecanoate)₃/AlEt₂Cl/Al(iBu)₃. The microstructures of polybutadiene, cis, trans, and vinyl, are about 96.0, 3.5, and 0.5%, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1279–1283, 2005     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Effect of water pretreatment on CO<Subscript>2</Subscript> capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor

A bubbling fluidized bed reactor was used to study CO₂ capture from flue gas by using a potassium-based solid sorbent, sorbKX35 which was manufactured by the Korea Electric Power Research Institute. A dry sorbent, sorbKX35, consists of K₂CO₃ for absorption and supporters for mechanical strength. To increase initial CO₂ removal, some amount of H₂O was absorbed in the sorbent before injecting simulated flue gas. It was possible to achieve 100% CO₂ removal for more than 10 minutes at 60°C and a residence time of 2 s with H₂O pretreatment. When H₂O pretreatment time was long enough to convert K₂CO₃ of sorbKX35 into K₂CO₃ · 1.5H₂O, CO₂ removal was excellent. The results obtained in this study can be used as basic data for designing and operating a large scale CO₂ capture process with two fluidized bed reactors. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Synthesis, structure and magnetic properties of β-MnO 2 nanorods

We present synthesis, structure and magnetic properties of structurally well-ordered single-crystalline β-MnO₂ nanorods of 50–100 nm diameter and several μm length. Thorough structural characterization shows that the basic β-MnO₂ material is covered by a thin surface layer (∼2.5 nm) of α-Mn₂O₃ phase with a reduced Mn valence that adds its own magnetic signal to the total magnetization of the β-MnO₂ nanorods. The relatively complicated temperature-dependent magnetism of the nanorods can be explained in terms of a superposition of bulk magnetic properties of spatially segregated β-MnO₂ and α-Mn₂O₃ constituent phases and the soft ferromagnetism of the thin interface layer between these two phases.     

Highly Efficient Overall Water Splitting Through Optimization of Preparation and Operation Conditions of Layered Perovskite Photocatalysts

The layered perovskite materials were found to give the high photocatalytic activity in water splitting reaction under UV irradiation, where the electronic structure of perovskite slab constructing the layered structure (the total cation valency) was the most crucial factor to the high photocatalytic activity. Both the excessive cation valency and the layered structure were required for active photocatalysts, while the slab thickness of layered perovskites had an insignificant effect on water-splitting activity. In order to identify key variables that affected photocatalytic activity and to optimize the performance of (110) layered perovskite, La₂Ti₂O₇ was modified by various methods. The optimum amount of loaded nickel had a great effect and the amount depended on the surface area of the perovskite phase. When an alkaline-earth element such as Ba, Sr, and Ca was doped on La₂Ti₂O₇, the photocatalytic activity was enhanced markedly. Introduction of an alkaline hydroxide into the reaction system as an external additive enhanced the activity further showing extremely high quantum yields close to 50%.     

New fatty acid derivatives from <Emphasis Type="Italic">Homaxinella</Emphasis> sp., a marine sponge

Fractionation of the MeOH extract of Homaxinella sp., a marine sponge, led to the isolation of a sodium salt of a new brominated FA (1), two new MG (2 and 4), and a new lysoPC (6). The geometry of the double bonds in 1 and 2 was defined by comparison of the NMR chemical shifts of the allylic carbons, nuclear Overhauser effect spectroscopy correlations of the allylic protons, and coupling constants of the vinylic protons with those reported. Evidence mainly from NMR and MS analyses established the planar structures of the compounds. Compounds 1, 2, 4, and 6 were evaluated for cytotoxicity against a panel of five human solid tumor cell lines. Only compound 1 showed moderate activity.     

Transport of oxygen and carbon dioxide through polycarbonate membrane

Sorption equilibria and permeation rates for oxygen and carbon dioxide in polycarbonate membrane were measured at different temperature between 30 and 60°C and at pressures up to 2.5 MPa. The pressure dependence of mean permeability coefficient to oxygen obeyed the conventional dual-mode mobility model, whereas that to carbon dioxide followed a modified dual-mode mobility model with concentration-dependent diffusivities, as that of polystyrene to the same gas did.