Characterization of RF-sputtered garnet films

Noncrystalline garnet films of nominal composition Y₃Fe₅O₁₂ and Y₂GdFe₅O₁₂ were synthesized by RF sputtering. The AC and DC resistivity data have been discussed in line with the model of Mott and Davis where conduction occurs through excitation of carriers into localized states at the band edges and hopping at energies close to the band tails.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Effect of a Hydrophilic PEO–PPO–PEO Copolymer on Cetyltrimethyl Ammonium Tosylate Solutions in Water

Cetyltrimethyl ammonium tosylate (CTAT) in water forms long flexible wormlike micelles at concentrations above 10 mM, leading to highly viscous solutions and viscoelastic stiff gels above 100 mM. In the presence of a nonmicellar hydrophilic PEO–PPO–PEO triblock copolymer F87 (TBC-F87, Total mol.wt. = 7,700, EO = 70%) these wormlike micelles RE transformed into smaller structures, as evident from a sharp decrease in viscosity and increase in specific conductance. These results are quantified by small angle neutron scattering (SANS) measurements. The PPO middle block of TBC-F87 gets inserted in the CTAT micelle, the size and total aggregation number of CTAT/TBC-F87 mixed micelles decreased but the number of TBC-F87 molecules in the mixed micelles increased with an increase in [TBC-F87]. Two break points in the typical specific conductance versus CTAT concentration plot at various [TBC-F87] amounts represent interactions between CTAT and TBC-F87. The penetration of PPO of TBC-F87 inside CTAT micelles decreases hydrophobicity of the core while the presence of PEO end blocks enhances hydrophilicity each favoring smaller micelles.     

Compositional and structural analysis of RF magnetron sputtered La3+-modified PZT thin films

In the present work, we report the preparation of lanthanum-modified lead zirconate titanate (PLZT) thin films in pure perovskite phase by RF magnetron sputtering. For this purpose, a 3-in. diameter target of PLZT (8/60/40) was prepared by conventional solid-state reaction route. The chemical composition of PLZT target was determined using gravimetric analysis followed by UV–vis and flame atomic absorption spectrometry. Various deposition parameters such as target-to-substrate spacing, deposition temperature, post-deposition annealing temperature and time have been optimized to obtain PLZT films in pure perovskite phase. The films prepared in pure argon at 100 W RF power without external substrate heating exhibited pure perovskite phase after rapid thermal annealing (RTA) as confirmed by X-ray diffraction (XRD). Compositional analysis of the PLZT film was performed by secondary ion mass spectroscopy (SIMS) using PLZT target as standard sample. Depth profile of the film shows very good stoichiometric uniformity of all elements of PLZT.     

Optimisation of processing variables affecting the osmotic dehydration of pomegranate arils

For the optimisation of osmotic dehydration by response surface methodology, the experiments were conducted according to Central Composite Rotatable Design (CCRD) with three variables at five levels. The low and high levels of the variables were 40 and 50 °C for osmotic solution temperature, 45 and 55°Bx for sucrose solution concentration, 60 and 100 min for duration of dipping in osmotic solution, respectively. The fruit to solution ratio was kept 1:4 (w/w) during all the experiments. Before dipping the arils in sucrose solution, the freezing of the whole pomegranate at ?18 °C was carried out to increase the permeability of the outer cellular layer of the arils. The arils were further convectively dehydrated at 60 °C air temperature up to final moisture content of 10% (wb) to make it a shelf stable product. The optimum conditions for osmotic solution concentration, temperature and process duration were 55°Bx, 40 °C and 100 min, respectively.     

Behaviour of Al-Mg alloys at high temperature

The behaviour of a few Al-Mg alloys (up to 7.1 wt% Mg) has been studied on heating in air at 500°C for 8 h or more. The precipitation of a spinel phase, MgAl₂O₄, is found to take place on the surface and along the transverse section (depth) of the specimen. The alloys seem to be resistant to internal oxidation below 4.5% Mg and thereafter prone to it. Beryllium modification does not suppress the progress of internal oxidation taking place in the Al-Mg alloys. The results have been interpreted on the basis of anodized photomicrographs and X-ray diffraction data.     

Growing trade of bioenergy in the EU: Public acceptability, policy harmonization, European standards and certification needs

Since 2000, the consumption of bioenergy in the European Union has grown, along with a concurrent growth in the trade of biomass for energy purposes (though traded volumes still remain small). Bioenergy production and trade will likely continue to increase into the future, driven by climate change concerns, emissions reduction targets, increasing concerns about domestic energy security and favourable policies. The harmonization of European standards and the development of certification systems are key issues to resolving potential negative effects of increased biomass trade. Certification systems not only address the issue of environmental sustainability from production to end-use, but also allow for product differentiation while adding value to sustainably produced products, which can ultimately enhance a competitive and sustainable bioenergy market. In addition to analyzing bioenergy trade growth in the European Union, a questionnaire survey of 92 bioenergy experts from eight member states within the European Union was conducted. Survey results show that bioenergy is highly accepted in the European Union but that there is a lack of European standards and policy harmonization, along with the absence of a competitive market or a certification system, all of which are necessary for sustainable production and trade of bioenergy. A large majority (63 percent) of the total respondents agreed that the certification of bioenergy is necessary to promote the sustainable use of biomass.