The social costs of emotional suppression: A prospective study of the transition to college.

There is growing interest in understanding how emotion regulation affects adaptation. The present study examined expressive suppression (which involves inhibiting the overt expression of emotion) and how it affects a critical domain of adaptation, social functioning. This investigation focused on the transition to college, a time that presents a variety of emotional and social challenges. Analyses focused on 2 components of suppression: a stable component, representing individual differences expressed both before and after the transition, and a dynamic component, representing variance specific to the new college context. Both components of suppression predicted lower social support, less closeness to others, and lower social satisfaction. These findings were robustly corroborated across weekly experience reports, self-reports, and peer reports and are consistent with a theoretical framework that defines emotion regulation as a dynamic process shaped by both stable person factors and environmental demands. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bilingual lexical access in context: Evidence from eye movements during reading.

Current models of bilingualism (e.g., BIA+) posit that lexical access during reading is not language selective. However, much of this research is based on the comprehension of words in isolation. The authors investigated whether nonselective access occurs for words embedded in biased sentence contexts (e.g., A. I. Schwartz & J. F. Kroll, 2006). Eye movements were recorded as French–English bilinguals read English sentences containing cognates (e.g., piano), interlingual homographs (e.g., coin, meaning corner in French), or matched control words. Sentences provided a low or high semantic constraint for target-language meanings. Both early-stage comprehension measures (e.g., first fixation duration, gaze duration, and skipping) and late-stage comprehension measures (e.g., go-past time and total reading time) showed significant cognate facilitation and interlingual homograph interference for low-constraint sentences. For high-constraint sentences, however, only early-stage comprehension measures were consistent with nonselective access. There was no evidence of cognate facilitation or interlingual homograph interference for late-stage comprehension measures. Thus, nonselective bilingual lexical access at early stages of comprehension is rapidly resolved in semantically biased contexts at later stages of comprehension. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Implicit Contact Handling for Deformable Objects

We present an algorithm for robust and efficient contact handling of deformable objects. By being aware of the internal dynamics of the colliding objects, our algorithm provides smooth rolling and sliding, stable stacking, robust impact handling, and seamless coupling of heterogeneous objects, all in a unified manner. We achieve dynamicsawareness through a constrained dynamics formulation with implicit complementarity constraints, and we present two major contributions that enable an efficient solution of the constrained dynamics problem: a time stepping algorithm that robustly ensures non-penetration and progressively refines the formulation of constrained dynamics, and a new solver for large mixed linear complementarity problems, based on iterative constraint anticipation. We show the application of our algorithm in challenging scenarios such as multi-layered cloth moving at high velocities, or colliding deformable solids simulated with large time steps.     

Structural Response of World Trade Center Buildings 1, 2 and 7 to Impact and Fire Damage

The National Institute of Standards and Technology (NIST) conducted an extensive investigation of the collapse of World Trade Center towers (WTC 1 and WTC 2) and the WTC 7 building. This paper describes the component, subsystem, and global analyses performed for the reconstruction of the structural response of WTC buildings 1, 2, and 7 to impact and fire damage. To illustrate the component and subsystem analyses, the approach taken for simulating the performance of concrete slabs and shear stud connectors in composite floors subject to fire conditions are presented, as well as steel floor framing connections for beams and girders. The development of the global models from the component and subsystem analyses is briefly described, including the sets of input data used to bound the probable conditions of impact and fire damage. The final analysis results that were used to develop the probable collapse hypotheses, and a comparison of the results against observed events, are presented for each building. A review of research activities focused on improving understanding of structural system response to multi-floor fires following the WTC disaster is also provided.     

Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites

Triaxial residual tensile stresses resulting after cooling a 3D woven composite from the curing temperature cause cracking in the resin pockets for weave architectures that have high through‐the‐thickness constraint. We show how curing cycle modifications can reduce the hydrostatic tensile stress generated by thermal mismatch during cooling of Hexcel RTM6 epoxy resin constrained in a quartz tube which simulates extreme constraint in a composite. The modified curing schedule consists of a high temperature cure to just before the glass transition, a lower temperature hold that takes the resin through the glass transition thereby freezing in the zero stress state, followed by high temperature cure to bring the resin to full conversion. We show that this process is sensitive to heating rates and can reduce the zero stress state of non‐toughened RTM6 resin to a temperature similar to a commercial rubber‐toughened resin, Cycom PR520. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43373.     

Photoreduction of Shewanella oneidensis Extracellular Cytochromes by Organic Chromophores and Dye‐Sensitized TiO2

The transfer of photoenergized electrons from extracellular photosensitizers across a bacterial cell envelope to drive intracellular chemical transformations represents an attractive way to harness nature's catalytic machinery for solar‐assisted chemical synthesis. In Shewanella oneidensis MR‐1 (MR‐1), trans‐outer‐membrane electron transfer is performed by the extracellular cytochromes MtrC and OmcA acting together with the outer‐membrane‐spanning porin ? cytochrome complex (MtrAB). Here we demonstrate photoreduction of solutions of MtrC, OmcA, and the MtrCAB complex by soluble photosensitizers: namely, eosin Y, fluorescein, proflavine, flavin, and adenine dinucleotide, as well as by riboflavin and flavin mononucleotide, two compounds secreted by MR‐1. We show photoreduction of MtrC and OmcA adsorbed on Ru^II‐dye‐sensitized TiO₂ nanoparticles and that these protein‐coated particles perform photocatalytic reduction of solutions of MtrC, OmcA, and MtrCAB. These findings provide a framework for informed development of strategies for using the outer‐membrane‐associated cytochromes of MR‐1 for solar‐driven microbial synthesis in natural and engineered bacteria.     

Regio‐ and Enantioselective Sequential Dehalogenation of rac‐1,3‐Dibromobutane by Haloalkane Dehalogenase LinB

The hydrolytic dehalogenation of rac‐1,3‐dibromobutane catalyzed by the haloalkane dehalogenase LinB from Sphingobium japonicum UT26 proceeds in a sequential fashion: initial formation of intermediate haloalcohols followed by a second hydrolytic step to produce the final diol. Detailed investigation of the course of the reaction revealed favored nucleophilic displacement of the sec‐halogen in the first hydrolytic event with pronounced R enantioselectivity. The second hydrolysis step proceeded with a regioselectivity switch at the primary position, with preference for the S enantiomer. Because of complex competition between all eight possible reactions, intermediate haloalcohols formed with moderate to good ee ((S)‐4‐bromobutan‐2‐ol: up to 87 %). Similarly, (S)‐butane‐1,3‐diol was formed at a maximum ee of 35 % before full hydrolysis furnished the racemic diol product.     

Glass with hydration-induced compressive stress profiles

A novel potassium phospho-aluminosilicate composition is described that can be strengthened by water vapor to achieve deep compressive stress (CS) profiles. Water vapor treatment at (A) 85°C and 85% relative humidity for 40 days results in a CS of 389 ± 20 MPa and a compressive depth of layer (DOL) of 18 ± 2 μm. When treated at (B) 160°C and 0.1 MPa for 7 days, a CS of 245 ± 20 MPa and a DOL of 40 ± 2 μm is achieved. Glasses with hydration-induced stress profiles can provide high retained strength following flaw introduction compared with ion-exchanged soda-lime silicate glass. Sample treatment B also has an exemplary Vickers indentation cracking threshold value greater than 20 kgf. The hydration profile determined by secondary ion mass spectrometry (SIMS) is shown to closely match the stress profile for these samples. SIMS analysis also shows that the depth of water enrichment correlates well with the depletion depth of phosphorus. The high tendency towards water-induced strengthening for this new type of glass even enables self-strengthening by the generation of a near-surface CS profile following exposure to ambient conditions.     

Flexible Blade‐Coated Multicolor Polymer Light‐Emitting Diodes for Optoelectronic Sensors

A method to print two materials of different functionality during the same printing step is presented. In printed electronics, devices are built layer by layer and conventionally only one type of material is deposited in one pass. Here, the challenges involving printing of two emissive materials to form polymer light‐emitting diodes (PLEDs) that emit light of different wavelengths without any significant changes in the device characteristics are described. The surface‐energy‐patterning technique is utilized to print materials in regions of interest. This technique proves beneficial in reducing the amount of ink used during blade coating and improving the reproducibility of printed films. A variety of colors (green, red, and near‐infrared) are demonstrated and characterized. This is the first known attempt to print multiple materials by blade coating. These devices are further used in conjunction with a commercially available photodiode to perform blood oxygenation measurements on the wrist, where common accessories are worn. Prior to actual application, the threshold conditions for each color are discussed, in order to acquire a stable and reproducible photoplethysmogram (PPG) signal. Finally, based on the conditions, PPG and oxygenation measurements are successfully performed on the wrist with green and red PLEDs.