Influence of disordering by low-temperature neutron irradiation on the superconducting transition temperature of Nb3Sn

The superconducting transition temperatureT _c of a Nb₃Sn diffusion wire has been studied as a function of low-temperature neutron irradiation (T=10 K).T _c is observed to be essentially constant until the fast neutron dose t (for neutron energiesE>0.1 MeV) exceeds a value of 10¹⁸ n/cm²; after this valueT _c decreases linearly with t up to the maximum applied dose of 1.05×10¹⁹ n/cm². Comparison with theory and other experimental data indicates that radiation-induced disorder is the primary mechanism for the observedT _c changes.Work supported by the Bundesministerium für Forschung und Technologie and by the Deutsche Forschungsgemeinschaft.     

Preparation and Luminescent Properties of Eu^3＋ Doped Calcium Phosphate Nanocrystalline

The nanocrystalline Eu^3＋ doped calcium phosphate was prepared by calcining precursors, which were got by precipitation method combined with ultrasound treatment and some polysaccharide. The existence of Eu^3＋ inhibited the reaction of Na^＋ ion and SO4^2- radical with apatite and resulted in the transformation of HAP to β- TCP by replacing the calcium ions. The strongest excitation peak was at 393 nm, and other lower peaks were at 361 nm, 375 nm, 381 nm, 418nm. The strongest emission spectrum appeared at about 618nm. The emission peak （579 nm） showed that Eu^3＋ ions distributed on Ca^2＋ sites of the apatitic structure.     

Regret and quality of life across the adult life span: The influence of disengagement and available future goals.

Two studies examined the associations between life regrets and indicators of quality of life across the adult life span. Given that opportunities to undo regrets decline with age, regret intensity was expected to be inversely associated with subjective well-being and health among older adults. In addition, the research explored protective factors that have the potential to reduce older adults' regret intensity. It was suggested that being disengaged from undoing the consequences of regrets and having many future goals available may reduce older adults' intensity of regret and thereby contribute to a better quality of life. Across both studies, the findings demonstrate that older adults perceived reduced opportunities to undo the consequences of their regrets and that regret intensity predicted a reduced quality of life only among older adults. Furthermore, the findings support the adaptive value of disengagement and available future goals for managing life regrets in older adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Interpreting the Good Life: Growth Memories in the Lives of Mature, Happy People.

In 2 studies, the authors examined autobiographical memories for the presence of 2 growth orientations that were expected to correspond differentially to maturity and well-being, which are considered to be key facets of "the good life" by L. A. King (2001). Mature participants emphasized integrative memories (conceptual integration and learning), whereas happy participants emphasized intrinsic memories (humanistic concerns). Both kinds of growth memories correlated more strongly with eudaimonic than with hedonic measures of well-being. Growth memories were largely independent of Big Five traits in relation to maturity and well-being. Finally, older participants were more likely than younger participants to have greater maturity (marginally) and well-being, but this was in part explained by older participants' greater tendency to have growth memories. The discussion considers the role of growth memories in the intentional cultivation of the good life. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Growing a hypercubical output space in a self-organizing featuremap

Neural maps project data from an input space onto a neuron position in a (often lower dimensional) output space grid in a neighborhood preserving way, with neighboring neurons in the output space responding to neighboring data points in the input space. A map-learning algorithm can achieve an optimal neighborhood preservation only, if the output space topology roughly matches the effective structure of the data in the input space. We here present a growth algorithm, called the GSOM or growing self-organizing map, which enhances a widespread map self-organization process, Kohonen's self-organizing feature map (SOFM), by an adaptation of the output space grid during learning. The GSOM restricts the output space structure to the shape of a general hypercubical shape, with the overall dimensionality of the grid and its extensions along the different directions being subject of the adaptation. This constraint meets the demands of many larger information processing systems, of which the neural map can be a part. We apply our GSOM-algorithm to three examples, two of which involve real world data. Using recently developed methods for measuring the degree of neighborhood preservation in neural maps, we find the GSOM-algorithm to produce maps which preserve neighborhoods in a nearly optimal fashion.     

The OODB path-method generator (PMG) using access weights and precomputed access relevance

A path-method is used as a mechanism in object-oriented databases (OODBs) to retrieve or to update information relevant to one class that is not stored with that class but with some other class. A path-method is a method which traverses from one class through a chain of connections between classes and accesses information at another class. However, it is a difficult task for a casual user or even an application programmer to write path-methods to facilitate queries. This is because it might require comprehensive knowledge of many classes of the conceptual schema that are not directly involved in the query, and therefore may not even be included in a user's (incomplete) view about the contents of the database. We have developed a system, called path-method generator (PMG), which generates path-methods automatically according to a user's database-manipulating requests. The PMG offers the user one of the possible path-methods and the user verifies from his knowledge of the intended purpose of the request whether that path-method is the desired one. If the path method is rejected, then the user can utilize his now increased knowledge about the database to request (with additional parameters given) another offer from the PMG. The PMG is based on access weights attached to the connections between classes and precomputed access relevance between every pair of classes of the OODB. Specific rules for access weight assignment and algorithms for computing access relevance appeared in our previous papers [MGPF92, MGPF93, MGPF96]. In this paper, we present a variety of traversal algorithms based on access weights and precomputed access relevance. Experiments identify some of these algorithms as very successful in generating most desired path-methods. The PMG system utilizes these successful algorithms and is thus an efficient tool for aiding the user with the difficult task of querying and updating a large OODB. Received July 19, 1993 / Accepted May 16, 1997     

A layered adaptive verification platform for simulation, test, and emulation

This adaptive architecture for structuring testbenches accommodates various models of a design, from transaction to silicon. Moreover, the adapter-based architecture supports the execution of design models on different simulators (high level, RTL, gate level, and switch level), hardware emulators (the testbench runs entirely on the emulator), and even testers. Here, we present a modular, layered testbench (MLTB) approach to building a testbench. This approach is similar to platform-based design. It consists of a generic testbench kernel (TBK), connected through a bus to testbench elements. Our verification platform also satisfies another meaning of platform: a set of connected tools or a powerful tool environment, normally with an attached database, that acts as a platform for verification.     

Charged cellular polymers with "ferroelectretic" behavior

Cellular space-charge electrets have recently emerged as a new class of materials for electromechanical devices, offering chances for a wide range of applications and challenges for materials optimization. However, many fundamental and applied aspects of the physics of these novel materials are not yet explored. Here we summarize our present understanding of the (quasi)-piezo- and -pyroelectricity in such materials. In contrast to the dipole-density piezoelectricity in ferroelectric polymers, the piezoelectric-like response of cellular polymers is intrinsic, with positive d/sub 33/ and negative d/sub 31/ and d/sub 32/ piezoelectric-like coefficients. Similarities with ferroelectric materials are outlined, especially switching of "polarization" and (quasi)-piezoelectricity. First steps towards patterned charging of cellular polymers are reported, an immediate consequence of the possibility for "polarization"-switchingin cellular materials. The results on cellular space-charge electrets suggest that well-known electret devices like microphones may be seen in a new light. Examples include dielectric and electromechanical hysteresis loops obtained with a commercially available electret microphone. In view of the results, cellular polymers may henceforth be called "ferroelectrets" and their material behavior "ferroelectretic". From an applied point of view, the performance of a Fresnel zone plate for focussing ultrasound is shown. Such a device may pave the way for a simple tool in nondestructive materials inspection, and demonstrates the large potential of cellular polymers for applications.     

Lanthanzirkonat: ein innovatives Wärmedämmschichtmaterial. Lanthanum zirconate: an innovative Thermal Barrier Material

This paper presents the work of the research project AiF‐13114 N/1. Within the scope of this project coating systems from Lanthanum Zirconate and Y ttria s tabilised Z irconia (YSZ) were developed by use of E lectron B eam P hysical V apour D eposition (EB‐PVD). In addition, the potentials of Lanthanum Zirconate and YSZ as thermal barrier coatings within gas turbines were examined. Basis of the coating development was the use of powdery Lanthanum and YSZ, that were vaporised in a PVD‐machine from a double‐grooved cupreous crucible. Process parameters are evaluated to gain long lasting, columnar Lanthanum Zirconate EB‐PVD coatings with high stability, low heat conductivity a higher sintering inertness, that offer the opportunity to increase the temperature within the first stage of a gas turbine system [1, 2, 3, 4, 5, 6]. Therefor YSZ ‐ commonly used as conventional thermal barrier coating ‐ was used as a reference system during the tests. As base material Inconel Alloy 600 (a nickel‐based superalloy) was applied. The microstructure and the topography of the developed coating systems were characterized with the help of scanning electron microscopy. Nanoindentation proved to be a measurement method in order to define the stiffness distribution along the columns. The thermal cycle durability was determined via thermal cycle test.     

DIC image reconstruction on large cell scans

The width of the emission spectrum of a common fluorophore allows only for a limited number of spectral distinct fluorescent markers in the visible spectrum, which is also the regime where CCD-cameras are used in microscopy. For imaging of cells or tissues, it is required to obtain an image from which the morphology of the whole cell can be extracted. This is usually achieved by differential interference contrast (DIC) microscopy. These images have a pseudo-3D appearance, easily interpreted by the human brain. In the age of high throughput and high content screening, manual image processing is not an option. Conventional algorithms for image processing often use threshold-based criteria to identify objects of interest. These algorithms fail for DIC images as they have a range from dim to bright with an intermediate intensity equal to the background, so as to produce no clear object boundary. In this article we compare different reconstruction methods for up to 100 MB-large DIC images and implement a new iterative reconstruction method based on the Hilbert Transform that enables identification of cell boundaries with standard threshold algorithms.