土体固结粉在软土地基加固中的应用研究

针对上海地区软土地基特点,利用工业废渣为主要原料配制成新型土体固结材料——土体固结粉。通过室内的无侧限抗压强度及XRD试验得出其固化土的强度性能及加固机理;再通过室外原位搅拌桩施工及芯样试验进行分析,研究了土体固结粉在软土地基加固实际工程中的适用性。     

搅拌棒吸附萃取技术在水质检测中的应用

搅拌棒吸附萃取SBSE是一项样品前处理技术,普遍应用于有机物检测的前处理.重点阐述了新型搅拌棒吸附萃取技术在地表水、地下水和生活饮用水检测中的应用,它具有固定相体积大、萃取容量高、无需外加搅拌子、避免竞争吸附以及通过自身吸附达到萃取富集的优点,并提出该技术在实际应用中存在的不足,对SBSE在水质检测中的未来发展进行了展望.     

安阳市水资源生态足迹与生态承载力研究

利用水资源生态足迹分析方法对安阳市2005~2014年的水资源生态足迹、生态承栽力进行了计算分析。结果表明,2005~2014年安阳市人均水资源生态足迹均值为0.45 hm~2/cap,且呈波动下降趋势。其中生产用水生态足迹占水资源生态足迹比重最大,达82.8%~91.4%,生活用水足迹其次,生态用水足迹最小,但呈上升趋势。安阳市水资源人均生态承载力较小,在0.048 hm~2/cap~0.068 hm~2/cap之间,受气候、水文起伏波动较大。安阳市2005—2014年间,水资源生态足迹均处于赤字状态,说明安阳市水资源利用长期以来一直是不可持续的。近10年来,安阳市万元GDP水资源生态足迹整体呈较快下降趋势,表明安阳市水资源利用效率正逐步提高。     

An immune orthogonal learning particle swarm optimisation algorithm for routing recovery of wireless sensor networks with mobile sink

The growth of mobile handheld devices promotes sink mobility in an increasing number of wireless sensor networks (WSNs) applications. The movement of the sink may lead to the breakage of existing routes of WSNs, thus the routing recovery problem is a critical challenge. In order to maintain the available route from each source node to the sink, we propose an immune orthogonal learning particle swarm optimisation algorithm (IOLPSOA) to provide fast routing recovery from path failure due to the sink movement, and construct the efficient alternative path to repair the route. Due to its efficient bio-heuristic routing recovery mechanism in the algorithm, the orthogonal learning strategy can guide particles to fly on better directions by constructing a much promising and efficient exemplar, and the immune mechanism can maintain the diversity of the particles. We discuss the implementation of the IOLPSOA-based routing protocol and present the performance evaluation through several simulation experiments. The results demonstrate that the IOLPSOA-based protocol outperforms the other three protocols, which can efficiently repair the routing topology changed by the sink movement, reduce the communication overhead and prolong the lifetime of WSNs with mobile sink.     

On the complexity of role updating feasibility problem in RBAC

In Role Based Access Control (RBAC) systems, it is necessary and important to update the role–permission assignments in order to reflect the evolutions of the system transactions. However, role updating is generally complex and challenging, especially for large-scale RBAC systems. This is because the resulting state is usually expected to meet various requirements and constraints. In this paper, we focus on a fundamental problem of role updating in RBAC, which determines whether there exists a valid role–permission assignment, i.e., whether it can satisfy all the requirements of the role updating and without violating any role–capacity or permission–capacity constraint. We formally define such a problem as the Role Updating Feasibility Problem (RUFP), and study the computational complexity of RUFP in different subcases. Our results show that although several subcases are solvable in linear time, this problem is NP-complete in the general case.     

Laplacian group sparse modeling of human actions

Recently, many local-feature based methods have been proposed for feature learning to obtain a better high-level representation of human behavior. Most of the previous research ignores the structural information existing among local features in the same video sequences, while it is an important clue to distinguish ambiguous actions. To address this issue, we propose a Laplacian group sparse coding for human behavior representation. Unlike traditional methods such as sparse coding, our approach prefers to encode a group of relevant features simultaneously and meanwhile allow as less atoms as possible to participate in the approximation so that video-level sparsity is guaranteed. By incorporating Laplacian regularization the method is capable to ensure the similar approximation of closely related local features and the structural information is successfully preserved. Thus, a compact but discriminative human behavior representation is achieved. Besides, the objective of our model is solved with a closed-form solution, which reduces the computational cost significantly. Promising results on several popular benchmark datasets prove the efficiency and effectiveness of our approach.     

Manipulating the phase morphology in PPS/PA66 blends using clay

By adding a small amount of clay into poly(p‐phenylene sulfide) (PPS)/polyamide 66 blends, the morphology was found to change gradually from sea–island into cocontinuity and lamellar supramolecular structure, as increasing of clay content. Clay was selectively located in the PA66 phase, and the exfoliated clay layers formed an edge‐contacted network. The change of morphology is not caused by the change of volume ratio and viscosity ratio but can be well explained by the dynamic interplay of phase separation between PPS and PA66 through preferential adsorption of PA66 onto the clay layers and through layer–layer repulsion. This provides a means of manipulating the phase morphology for the immiscible polymer blends. The mechanical and tribological properties of PPS/PA66 blends with different phase morphologies (different clay contents) were studied. Both tensile and impact strength of the blends were found obviously increased by the addition of clay. The antiwear property was greatly improved for the blends with cocontinuous phase form. Our work indicates that the phase‐separating behavior of polymer blends contained interacting clay can be exploited to create a rich diversity of new structures and useful nanocomposites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

新型离子液体气相色谱固定相研究

合成了一种用作新型气相色谱固定相的室温离子液体[C7H17NO] [(CF3SO2)2N]-,并考察其色谱性能。该固定相具有较好的成膜性、较高的柱效、较强的极性,对正构烷烃、芳香族化合物以及一些位置异构体具有良好的分离效果。     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002