Mechanical performance and texture characteristic of an IF steel containing Nb and Ti by double cold rolling

Single cold rolling and double cold rolling were applied to hot rolled strips with different reduction ratios. The evolutions of {100},{111} and Goss face texture during double rolling were investigated by comparing the orientation distribution function(ODF) of the double rolled sample with that of the single rolled one. The double cold rolling texture is characterized by a higher γ-texture and a lower α-texture,and the {111}<112> component is improved remarkably. Based on the TEM observation and mechanical...     

Effects of welding wire composition and welding process on the weld metal toughness of submerged arc welded pipeline steel

The effects of alloying elements in welding wires and submerged arc welding process on the microstructures and low-temperature impact toughness of weld metals have been investigated.The results indicate that the optimal contents of alloying elements in welding wires can improve the low-temperature impact toughness of weld metals because the proentectoid ferrite and bainite formations can be suppressed,and the fraction of acicular ferrite increases.However,the contents of alloying elements need to vary along with the welding heat input.With the increase in welding heat input,the contents of alloying elements in welding wires need to be increased accordingly.The microstructures mainly consisting of acicular ferrite can be obtained in weld metals after four-wire submerged arc welding using the wires with a low carbon content and appropriate contents of Mn,Mo,Ti-B,Cu,Ni,and RE,resulting in the high low-temperature impact toughness of weld metals.     

Antibacterial and corrosive properties of copper implanted austenitic stainless steel

Copper ions were implanted into austenitic stainless steel (SS) by metal vapor vacuum arc with a energy of 100 keV and an ions dose range of (0.5-8.0)×1017 cm-2. The Cu-implanted SS was annealed in an Ar atmosphere furnace. Glancing X-ray diffrac-tion (GXRD), transmission electron microscopy (TEM) and Auger electron spectroscopy (AES) were used to reveal the phase compositions, microstructures, and concentration profiles of copper ions in the implanted layer. The results show that the antibacterial property...     

Evolution of carbides and carbon content in matrix of an ultra-high carbon sintered steel during heat treatment process

DTA, thermal expansion, XRD, and SEM were used to evaluate the effect of quenching temperature on the mechanical properties and microstructure of a novel sintered steel Fe-6Co-1Ni-5Cr-5Mo-1C. Lattice parameters and the mass fraction of carbon dissolved in the matrix of the steel quenched were investigated. It is discovered that the hardness of the steel increases with quench-ing temperature in the range of 840-900℃ and remains constant in the range of 900 to 1100℃. It decreases rapidly when the tem-perature is higher than 1100℃. The mass fraction of carbon dissolved in the matrix of the steel quenched at 840℃ is 0.38, but when the quenching temperature is increased to 1150℃, it increases to 0.98. The carbides formed during sintering are still present at grain boundaries and in the matrix of the steel quenched at low quenching temperatures, such as 840℃. When the quenching temperature is increased to 1150℃, most of the carbides at grain boundaries are dissolved with just a small amount of spherical M23C6 existing in the matrix of the quenched steel.     

Corrosion behavior and mechanism of the automotive hot-dip galvanized steel with alkaline mud adhesion

The corrosion behavior and mechanism of hot-dip galvanized steel and interstitial-free (IF) substrate with alkaline mud adhesion were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and linear polarization. The results show that non-uniform corrosion occurs on the galvanized steel and IF substrate during 250 h with the mud adhesion. The corrosion products on the galvanized steel are very loose and porous, which are mainly ZnO, Zn5(OH...     

Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy

The effect of injection pressure, piston velocity, and the forming temperature of semisolid slurry on the filling behavior of the semi-solid A356 aluminum alloy was investigated by simulation methods. The simulation results show that these processing parameters have an important effect on the filling behavior of the semi-solid A356 aluminum alloy. The slurry flows steadily in the cavity when the injection pressure, the piston velocity, and the forming temperature are low, but it is prone to turbulent flow w...     

Microstructural characterization of as-cast and homogenized 2D70 aluminum alloy

The microstructure of the as-cast 2D70 aluminum alloy and its evolution during homogenization were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) analysis. The results indicate that the microstructure of the as-cast 2D70 aluminum alloy mainly consists of the dendritic network of aluminum solid solution and intermetallic compounds (Al2CuMg, Al2Cu, Al9FeNi, Cu2FeAl7...     

Stress-strain partitioning analysis of constituent phases in dual phase steel based on the modified law of mixture

A more accurate estimation of stress-strain relationships for martensite and ferrite was developed, and the modified law of mixture was used to investigate the stress-strain partitioning of constituent phases in dual phase (DP) steels with two different martensite volume fractions. The results show that there exist great differences in the stress-strain contribution of martensite and ferrite to DP steel. The stress-strain partitioning coefficient is not constant in the whole strain range, but decreases with...     

Comprehensive assessment on dynamic roof instability under fractured rock mass conditions in the excavation disturbed zone

The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine,China.The rock mass was particularly weak and fractured.There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone (EDZ) with the collapsing volume of 216 m3.First,the field detailed geological environment,regional seismic dy-namics,and dynamic instability of roadways were generally investigated.Second,the field multiple-index monitoring measurements for detecting the deep delamination of the roof,convergence deformation,bolt-cable load,acoustic emission (AE) characteristic pa-rameters,total AE events,AE energy-releasing rate,rock mass fracture,and damage were arranged.Finally,according to the time-space-strength relations,a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.     

Characteristics of shell thickness in a slab continuous casting mold

The key to reduce shell breakout in the continuous casting process is to control shell thickness in the mold.A numerical simulation on the turbulent flow and heat transfer coupled with solidification in the slab mold using the volume of fluid (VOF) model and the enthalpy-porosity scheme was conducted and the emphasis was put upon the flow effect on the shell thickness profiles in longitudinal and transverse directions.The results show that the jet acts a stronger impingement on the shell of narrow face,which causes a zero-increase of shell thickness in a certain range near the impingement point.The thinnest shell on the slab cross-section locates primarily in the center of the narrow face,and secondly near the comer of the wide face.Nozzle optimization can obviously increase the shell thickness and make it more uniform.