DISPERSION COMPENSATION CFBG IN100km 10Gbit／s RECIRCULATING SYSTEMS

A 10Gbit/s recirculating system is configured with Chirped Fiber Bragg Grating (CFBG) for the dispersion compensation. For the first time, the transmission distance in the loop reaches 1000km with bit error rate of 10-9. The effect of the group delay ripple of the fiber grating is also investigated in the recirculating systems, and it is shown that the transmission distance is limited to 4 cycles (4×167.1km ) in the loop with the power penalty fluctuation below 1.0dB. Thus the group delay ripple should be reduced to allow for the wavelength drift of±5GHz. At the end of this letter, the principles are given for designing long haul recirculating systems with dispersion compensation CFBG.     

Synthesis and characterization of biocompatible hydroxyapatite coated ferrite

Ferrite particles coated with biocompatible phases can be used for hyperthermia treatment of cancer. We have synthesized substituted calcium hexaferrite, which is not stable on its own but is stabilized with small substitution of La. Hexaferrite of chemical composition (CaO)_0.75(La₂0₃)_0.20(Fe₂O₃)₆ was prepared using citrate gel method. Hydroxyapatite was prepared by precipitating it from aqueous solution of Ca(NO₃)₂ and (NH₄)₂HPO₄ maintaining pH above 11. Four different methods were used for coating of hydroxyapatite on ferrite particles. SEM with EDX and X-ray diffraction analysis shows clear evidence of coating of hydroxyapatite on ferrite particles. These coated ferrite particles exhibited coercive field up to 2 kOe, which could be made useful for hysteresis heating in hyperthermia. Studies by culturing BHK-21 cells and WBC over the samples show evidence of biocompatibility. SEM micrographs and cell counts give clear indication of cell growth on the surface of the sample. Finally coated ferrite particle was implanted in Kasaulli mouse to test its biocompatibility. The magnetic properties and biocompatibility studies show that these hydroxyapatite coated ferrites could be useful for hyperthermia.     

Electrochemical synthesis and characterization of chloride doped polyaniline

Chloride doped polyaniline conducting polymer films have been prepared in a protic acid medium (HCl) by potentiodynamic method in an electrochemical cell and studied by cyclic voltammetry and FTIR techniques. The FTIR spectra confirmed Cl^- ion doping in the polymers. The polymerization rate was found to increase with increasing concentration of aniline monomer. But the films obtained at high monomer concentration were rough having a nonuniform flaky polyaniline distribution. Results showed that the polymerization rate did not increase beyond a critical HCl concentration. Cyclic voltammetry suggested that, the oxidation-reduction current increased with an increase in scan rate and that the undoped polyaniline films were not hygroscopic whereas chloride doped polyaniline films were found to be highly hygroscopic.     

掌握油气生产发展规律 提高自动化应用水平

油气生产的自动化过程控制是转变生产方式,发展油气生产依靠的主要科学技术之一.结合油气生产发展的特征,全面总结了中国石油近几年自动化技术应用取得的成绩,针对不同的生产特征,确定了自动化控制系统的不同功能和构成特点,提出了自动化系统应用中存在的问题和发展方向.     

基于PC机群的大地电磁Occam反演并行计算研究

Occam反演以其稳定收敛和不依赖于初始模型的特性被广泛应用于大地电磁数据的处理，但偏导数矩阵的计算和拉格朗日乘子的求取导致大量的模型正演，使得反演速度较低。为此，研究了用基于PC机群的并行计算来解决这一问题的方法。首先对Occam反演方法进行了阐述；然后，分析了反演方法中各计算耗费的时间，提出对约占计算量90％的偏导数和拉格朗日乘子进行并行计算的思想，即偏导数计算采用频点计算一级的大粒度并行，拉格朗日乘子扫描和一维搜索分别采用弘值计算一级的大粒度并行和频点计算一级的小粒度并行；给出了并行计算的实现方法，即在PC机群上，利用主一从编程模式实现Occam反演的整体并行计算。在计算中，采用任务组合方式，减少了通信量，较好地实现了负载均衡。在4节点PC机群上，对应于拉格朗日乘子的扫描和一维搜索方式，整体加速比分别达到3．36和2．83。     

现场可编程门阵列第五讲FPGA实现嵌入式系统

概述 在许多领域中广泛应用的嵌入式计算系统(简称为嵌入式系统)，是在更大的电子器件中嵌入的重复完成特定功能的计算系统，它经常不被器件的使用者所识别，但在各种常用的电子器件中能够找到这些嵌入式系统。例如，消费类电子产品中的手机、寻呼机、数字相机、摄像机、录像机、个人数字助理等，家用电器中的微波炉、洗衣机、烤箱、门禁系统、照     

随机减量技术中周期激励的影响及消除方法

本文针对机械系统中通常存在确定性周期激励的事实 ,论证了周期干扰成分的存在对提取的随机减量特征信号的影响 ,基于数字滤波技术提出了一种从周期干扰环境中提取随机减量特征信号的简便方法。在回转机械稳定性监测中的应用实例表明本文提出的方法是有效的。     

基于USB总线的虚拟频谱分析仪设计

文章详细介绍了基于USB总线的虚拟频谱分析仪的设计过程。该仪器使用嵌入式混合处理器MC56F8323来实现动态信号的实时采集、频谱分析和数字滤波等功能。处理结果由USB2．0接口芯片CY7C68013上传至PC机．以完成数据显示、存储、绘制图形等功能。其中，CY7C68013工作于Slave FIFO模式，以实现与MC56F8323间的数据传输。该系统可同时对两路动态信号进行实时谱分析，每路采样频率高选500kHz。     

WC/Cu复合材料制备及其高温性能

用机械合金化法结合冷变形，制备了WC／Cu复合材料，研究了冷变形后复合材料的组织特征和高温退火时韵性能变化。结果表明：烧结后的材料经冷变形，组织呈显著纤维状，WC颗粒弥散分布，密度明显提高，达到理论密度的99．2％；复合材料经600～900℃高温退火，强度和硬度略有下降，塑性则有大幅提高；900℃退火时未发生明显的再结晶，界面结合良好；所制备的WC／Cu复合材料有优良的综合性能。