钢管机械扩径工艺研究

介绍了大口径直缝焊管机械扩径的优点，原理及扩径力的计算，找出影响扩径力及扩径头寿命的因素。     

基于PRO/E三维管道轨迹专用检具的设计

介绍使用该软件组件设计模块中的高级工具———切除 (CutOut)功能设计高精度三维轨迹管道零件检具的方法 ,该方法具有高效和精密等特点。     

High-temperature hydrothermal systems in West Yunnan Province, China

There are more than 660 thermal springs in West Yunnan Province, 30 of which are high-temperature hydrothermal systems with reservoir temperatures above 150°C.All thermal springs in West Yunnan are under the control of the tectonics, most of them being distributed at anticlinoria of metamorphic rocks and granites. This paper discusses the relationship between thermal areas and tectonics, the correlation between thermal springs in West Yunnan and North Thailand, and the geothermal prospects in West Yunnan.     

阶跃信号突变点检测的小波分析法

文章运用小波理论这种新的数学工具,对于由基本平稳的慢变信号和阶跃型突变信号线性组合而构成的这类信号,提出了一种以连续小波变换为主体的检测和分析方法。理论以及实例分析表明,这种方法对于阶跃型突变信号的检侧,是颇为有效的。     

Filtres microondes en microruban suspendu

The authors present the design and the development of integrated microwave filters using suspended substrate microstrip, a technology that provides many advantages. Through quasi-static approximation the propagation structure has been treated using integral equations solved with the method of moments. Thanks to this tool of analysis and to an accurate synthesis method, a series of bandpass filters have been designed and manufactured. The results presented validate the accuracy of our design method.     

WXJB—E型多点温度监测报警仪的研制

本文介绍了 WXJB—E 型多点温度监测报警仪的设计思想、基本原理、技术关键、技术指标及其功能。     

基于TCP/IP的入侵检测评测技术研究

入侵检测系统的评测是入侵检测研究的一个重要方面。论文研究TCP/IP协议下如何利用协议的脆弱性按层次生成评测数据,在此基础上提出了分段混合评测的入侵检测评测方法。该方法的主要思想是数据混合和评测分段。相对以往的评测方法,由于数据混合,它的评测数据更丰富、更接近现实环境,而且可以自由添加;由于评测分段,简化了评测的实现,对正常网络的干扰很小,能够生成一些特定网络中无法生成的攻击。     

Analysis of design and part load performance of micro gas turbine/organic Rankine cycle combined systems

This study analyzes the design and part load performance of a power generation system combining a micro gas turbine (MGT) and an organic Rankine cycle (ORC). Design performances of cycles adopting several different organic fluids are analyzed and compared with performance of the steam based cycle. All of the organic fluids recover greater MGT exhaust heat than the steam cycle (much lower stack temperature), but their bottoming cycle efficiencies are lower. R123 provides higher combined cycle efficiency than steam does. The efficiencies of the combined cycle with organic fluids are maximized when the turbine exhaust heat of the MGT is fully recovered at the MGT recuperator, whereas the efficiency of the combined cycle with steam shows an almost reverse trend. Since organic fluids have much higher density than steam, they allow more compact systems. The efficiency of the combined cycle, based on a MGT with 30 percent efficiency, can reach almost 40 percent. Also, the part load operation of the combined system is analyzed. Two representative power control methods are considered and their performances are compared. The variable speed control of the MGT exhibits far better combined cycle part load efficiency than the fuel only control despite slightly lower bottoming cycle performance.     

工字梁的抗剪极限承载力

对工字梁腹板抗剪极限承载力的研究进行总结,对各种公式与文献中的试验结果进行对比,将拉力场理论和转向应力场理论的假定与ANSYS分析揭示的腹板应力发展变化规律进行对比,指出了假定和数值分析结果的不一致。提出了翼缘对腹板转动约束的合理参数,得到精度良好的考虑翼缘约束的腹板剪切屈曲系数。利用得到的屈曲系数,考虑翼缘抗弯承载力的贡献,提出新的工字梁抗剪极限承载力的计算公式。与现有试验数据和ANSYS非线性有限元分析结果的对比,证实建议方法离散性较小,适用范围广,尤其是对于通用高厚比较大的梁,较以往方法有了较大改进。