Mesenchymal Stromal Cell Therapy in Novel Porcine Model of Diffuse Liver Damage Induced by Repeated Biliary Obstruction

In liver surgery, biliary obstruction can lead to secondary biliary cirrhosis, a life-threatening disease with liver transplantation as the only curative treatment option. Mesenchymal stromal cells (MSC) have been shown to improve liver function in both acute and chronic liver disease models. This study evaluated the effect of allogenic MSC transplantation in a large animal model of repeated biliary obstruction followed by partial hepatectomy. MSC transplantation supported the growth of regenerated liver tissue after 14 days (MSC group, n = 10: from 1087 ± 108 (0 h) to 1243 ± 92 mL (14 days); control group, n = 11: from 1080 ± 95 (0 h) to 1100 ± 105 mL (14 days), p = 0.016), with a lower volume fraction of hepatocytes in regenerated liver tissue compared to resected liver tissue (59.5 ± 10.2% vs. 70.2 ± 5.6%, p < 0.05). Volume fraction of connective tissue, blood vessels and bile vessels in regenerated liver tissue, serum levels of liver enzymes (AST, ALT, ALP and GGT) and liver metabolites (albumin, bilirubin, urea and creatinine), as well as plasma levels of IL-6, IL-8, TNF-α and TGF-β, were not affected by MSC transplantation. In our novel, large animal (pig) model of repeated biliary obstruction followed by partial hepatectomy, MSC transplantation promoted growth of liver tissue without any effect on liver function. This study underscores the importance of translating results between small and large animal models as well as the careful translation of results from animal model into human medicine.     

Conversion kinetics of container glass batch melting

Understanding the batch-to-glass conversion process is fundamental to optimizing the performance of glass-melting furnaces and ensuring that furnace modeling can correctly predict the observed outcome when batch materials or furnace conditions change. To investigate the kinetics of silica dissolution, gas evolution, and primary foam formation and collapse, we performed X-ray diffraction, thermal gravimetry, feed expansion tests, and evolved gas analysis of batch samples heated at several constant heating rates. We found that gas evolving reactions, foaming, and silica dissolution depend on the thermal history of the batch in a similar manner: the kinetic parameters of each process were linear functions of the square root of the heating rate. This kinetic similarity reflects the stronger-than-expected interdependence of these processes. On the basis of our results, we suggest that changes in furnace operating conditions, such as firing or boosting, influence the melting rate less than what one would expect without consideration of batch conversion kinetics.     

A novel multiscale approach to brittle fracture of nano/micro‐sized components

Principles and advantages of a new concept based on the ab initio aided strain gradient elasticity theory are shown in comparison with the classical Barenblatt cohesive model. The method is applied to the theoretical prediction of the critical energy release rate and the crack tip opening displacement at the crack instability in nanopanels made of germanium and molybdenum crystals. The necessary length scale parameter l₁ is determined for germanium and molybdenum by the best gradient elasticity fits of ab initio computed screw dislocation displacements and phonon dispersions. Values of ab initio computed critical energy release rates and crack opening profiles revealed that the length l₁ is related to inflexion points of profiles. A novel ab initio method in combination with continuum mechanics was successfully tested to replace molecular statics dependent of availability of interatomic potentials. The asymptotic strain gradient elasticity solution for displacement components near the crack tip in materials with cubic lattice was also derived.     

Viscosity of glass-forming melt at the bottom of high-level waste melter-feed cold caps: Effects of temperature and incorporation of solid components

During the final stages of conversion of melter feed (glass batch) to molten glass, the glass-forming melt becomes a continuous liquid phase that encapsulates dissolving solid particles and gas bubbles that produce primary foam at the bottom of the cold cap (the reacting melter feed in an electric glass-melting furnace). The glass-forming melt viscosity plays a dominant role in primary foam formation, stability, and eventual collapse, thus affecting the rate of melting (the glass production rate per cold-cap area). We have traced the glass-forming melt viscosity during the final stages of feed-to-glass conversion as it changes in response to changing temperature and composition (resulting from dissolving solid particles). For this study, we used high-level waste melter feeds—taking advantage of the large amount of data available to us—and a variety of experimental techniques (feed expansion test, evolved gas analysis, thermogravimetric analyzer-differential scanning calorimetry, X-ray diffraction, and viscometer). Starting with a relatively low value at the moment when the melt connects, melt viscosity reached maximum within the primary foam layer and then decreased to its final melter operating temperature value. At the cold-cap bottom—the boundary between the primary foam layer and the thermal boundary layer—where physicochemical reactions of a melter feed influence the driving force of the heat transfer from the melt to the cold cap, the melt viscosity affects the rate of melting predominantly through its effect on the temperature at which primary foam is collapsing.     

The putative Saginaw impact structure,Michigan, Lake Huron,in the light of gravity aspects derived from recent EIGEN 6C4 gravity field model

The hypothetical impact structure in the Saginaw Bay (Michigan, USA, Lake Huron) has been tested by the gravity data derived from the recent gravity field model EIGEN 6C4 (expanded to degree and order 2190, with ground resolution of ~9?km). The following gravity field aspects were used: the gravity disturbances/anomalies, second derivatives of the disturbing potential (Marussi tensor), two of three gravity invariants, their specific ratio (known as 2D factor), the strike angles, and the virtual deformations. These gravity aspects are sensitive in various ways to the underground density contrasts. For the Saginaw Bay area, we confirm that we do not see any typical impact crater in terms of gravity disturbance or the radial second order derivative, possibly because of the thick layer of the ice located at the place and time of the impact. But the “combed” strike angles (one type of the gravity aspects we use) disclose a trace of high pressure to the SE/S/SW of the Bay and may be due to an impacting body. Thus, we provide circumstantial evidence of the Younger Dryas impact hypothesis.     

Phase transition in swollen gels

Summary The photoelastic behaviour of two networks — polyacrylamide (PAAm) and of a network prepared by the copolymerization of acrylamide with 5 mol.% sodium methacrylate — was investigated in water-acetone mixtures. For the PAAm network the dependence of all photoelastic characteristics on the composition of the mixture is continuous. At 54 vol.% acetone in the mixture, the ionized network undergoes a transition which gives rise to jumpwise changes in the shear modulus, deformational-optical coefficient, C, and in the refractive index of the gel, n_g. While in the collapsed state the optical anisotropy of the statistical segment is negative, –3×10^–24 cm³ (indicating an interaction between the side chains), in the expanded state it is positive, 0.5 × 10^–24 cm³. The dependence of all optical characteristics on the composition of the mixtures suggests that: (a) in both networks we have a transition between two conformational states of the chain; while for the ionized network the transition is a discrete one, for the nonionized network it takes place in the range between 30 and 45 vol.% acetone in the mixture; (b) in both networks the gels are optically homogeneous throughout the whole range of compositions of the mixtures (and thus also in the close vicinity of the collapse of the ionized network).     

The participation of crown ethers in the initiation of group-transfer polymerisation

Summary The use of crown ethers in conjunction with alkali metal salts, as catalysts in group-transfer polymerization, is discussed.     

Anionic polymerization of acrylates. XIV. Synthesis of MMA/acrylate block copolymers initiated with ester-enolate/tert-alkoxide complex

Diblock copolymers of methyl methacrylate (MMA) with 2-ethylhexyl, butyl, ethyl or tert-butyl acrylate (EtHA, BuA, EtA, t-BuA) have been prepared by the ligated anionic polymerization initiated with methyl 2-lithioisobutyrate (MIB-Li) in the presence of an excess of Li tert-butoxide (t-BuOLi) in toluene/THF mixture at −60 or −78 °C. The copolymers, prepared at −60 °C, show MWD with a hint of bimodality, indicating partial deactivation of the living PMMA upon addition of acrylic monomer. At −78 °C, the extent of this deactivation is distinctly lower, the formed block copolymers, in particular, poly(MMA-b-EtHA), have unimodal MWD and exhibit tails only in the lower-molecular-weight region. Poly(MMA-b-EtHA)s were extracted with acetonitrile dissolving PMMA; very small parts of the crude products dissolved, whereas prevailing parts remained as solids documenting thus formation of block copolymer in a high yield. Surprisingly, the highest amount of self terminated PMMA was found in block copolymerization of MMA with t-BuA at both the temperatures, the products of which had clearly bimodal MWDs. This finding is shortly discussed on the basis of relatively slow propagation of t-BuA in comparison with EtHA, BuA and EtA.     

Synthesis and Characterization of Pyridine Compounds for Amperometric Measurements of Leukocyte Esterase

We introduce a new class of substrates (compounds I – III ) for leukocyte esterase (LE) that react with LE yielding anodic current in direct proportion to LE activity. The kinetic constants K_m and k_cat for the enzymatic reactions were determined by amperometry at a glassy carbon electrode. The binding affinity of I – III for LE was two orders of magnitude better than that of existing optical LE substrates. The specificity constant k_cat/K_m was equal to 2.7, 3.8, and 5.8×10⁵ m ^?1 s^?1 for compounds containing the pyridine ( I ), methoxypyridine ( II ), and (methoxycarbonyl)pyridine ( III ), respectively, thus showing an increase in catalytic efficiency in this order. Compound III had the lowest octanol/water partition coefficient (log p=0.33) along with the highest topological surface area (tPSA=222 Ų) and the best aqueous solubility (4.0 mg mL^?1). The average enzymatic activity of LE released from a single leukocyte was equal to 4.5 nU when measured with compound III .