Diffusion Behaviour of Fe-Cu Interface of Copper Brazed Double-wall Steel Tubes

By means of electron probe(EPMA),scanning electron microscope(SEM),and optical microscope(QM),the diffusion behaviour on the Fe-Cu interface of copper brazed double-wall steel tubes andthe microstructure of the diffusion layer have been investigated.There are three kinds of metallurgicalbonds between copper plating layer and steel substrate: (1)the Cu diffusing into steel substratealong grain boundary of ferrite;(2)the Cu diffusion into grain bulk of ferrite: (3)the Fe diffusing intoCu layer.The copper brazed double-wall steel tubes are formed by the combination of the diffusionsmentioned above and this is the reason for excellent mechanical and technological properties of thecopper brazed double-wall steel tubes.     

新钢炼铁系统技术进步

通过加强精料、实施技术改造、优化高炉操作等措施，新钢炼铁生产取得了明显的进步，技术经济指标明显改善。     

岩屑泊松比实验测定仪

针对目前地层泊松比测定方法的局限 ,提出了利用上返岩屑压实测定地层泊松比的设想 ,并研制出岩屑泊松比实验测定仪。某油田已有的压实岩屑泊松比与实际声波测井资料计算泊松比对比发现 ,运用岩屑泊松比实验测定仪所得的实验结果与原始地层的泊松比有很好的一致性(两者的误差在± 5 %之间 )。利用该测定仪 ,可实现对钻井过程中上返岩屑的连续快速测定 ,大大降低工程取心所增加的钻井成本 ,还可为钻井施工在第一时间提供相关的地层信息     

BAS设计中的误区

文章结合实际经验,就BAS设计中存在的一些误区进行探讨,详细介绍在BAS设计中关于系统集成、DDC配置、设备控制及选择等方面容易出现的问题,并给出了解决问题的办法。     

China''''s First Orimulsion-Fueled Power Plant Constructed in Zhanjiang

A ceremony commencement of Orimulsion-fueled electric power generation project was held in Zhanjiang City, Guangdong Province, on November 26. Vice Governor of Guangdong Province You Ningfeng, Vice President of PetroChina and other officials from the related departments attended the foundation-laying ceremony for the power plant.     

电冰箱节能潜力的研究

本文首先简要讨论了一些用于电冰箱的节能措施。然后通过ERA软件及自行编制的软件计算了使用这些措施后电冰箱的能耗情况。为了分析这些措施的可行性。继而进行了回收期和生命周期成本计算。分析结果表明，这些节方法不仅技术上能够实现，而且在经济上也具有可操作性。     

高酸性气田压力容器无损检测

通过对压力容器四种常规无损检测方法进行分析对比,阐述了高酸性气田压力容器对接接头的无损检测方法和比例,在满足国内外现行标准规范的前提下,应加大超声波检测比例,对接触高酸性气体介质的焊缝内表面进行100%磁粉检测或渗透检测,最大限度地检测出焊缝内表面或近表面裂纹,确保高酸性气田地面建设工程的安全。     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.     

混凝土多孔砖应用技术研究

在分析了多孔砖力学特点的基础上,通过分析和研究,找出克服由于设计、施工原因造成的混凝土多孔砖砌体强度下降的措施。