面向嵌入式系统组态工具的研究

本文在对当前流行的组态软件进行了分析的基础上，根据专用嵌入式系统的特点，设计了一个面向嵌入式系统组态工具的软件原型，并给出了相应的数据结构。     

管内装元件强化传热的技术经济评价

提出了一种管内装元件强化传热的技术经济评价方法，此方法综合考虑了强化换热器管内传热膜系数的提高和管内流体阻力的增大，与普通的管壳式换热器相比，所带来的投资费用和使用费用变化，这个变化量可用净现值增量△NPV来表示。根据△NPV值来评价强化传热技术，从而为强化传热技术的开发和推广及进行决策提供指导。     

Battery-Aware Routing for Streaming Data Transmissions in Wireless Sensor Networks

Recent technological advances have made it possible to support long lifetime and large volume streaming data transmissions in sensor networks. A major challenge is to maximize the lifetime of battery-powered sensors to support such transmissions. Battery, as the power provider of the sensors, therefore emerges as the key factor for achieving high performance in such applications. Recent study in battery technology reveals that the behavior of battery discharging is more complex than we used to think. Battery powered sensors might waste a huge amount of energy if we do not carefully schedule and budget their discharging. In this paper we study the effect of battery behavior on routing for streaming data transmissions in wireless sensor networks. We first give an on-line computable energy model to mathematically model battery discharge behavior. We show that the model can capture and describe battery behavior accurately at low computational complexity and thus is suitable for on-line battery capacity computation. Based on this battery model we then present a battery-aware routing (BAR) protocol to schedule the routing in wireless sensor networks. The routing protocol is sensitive to the battery status of routing nodes and avoids energy loss. We use the battery data from actual sensors to evaluate the performance of our protocol. The results show that the battery-aware protocol proposed in this paper performs well and can save a significant amount of energy compared to existing routing protocols for streaming data transmissions. Network lifetime is also prolonged with maximum data throughput. As far as we know, this is the first work considering battery-awareness with an accurate analytical on-line computable battery model in sensor network routing. We believe the battery model can be used to explore other energy efficient schemes for wireless networks as well.     

Effect of surfactants and liquid hydrocarbons on gas hydrate formation rate and storage capacity

Hydrate formation rate plays an important role in making hydrates for the storage and transport of natural gas. Micellar surfactant solutions were found to increase gas hydrate formation rate and storage capacity. With the presence of surfactant, hydrate could form quickly in a quiescent system and the energy costs of hydrate formation reduced. Surfactants (an anionic surfactant, a non‐ionic surfactant and their mixtures) and liquid hydrocarbons (cyclopentane and methylcyclohexane) were used to improve hydrate formation. The experiments of hydrate formation were carried out in the pressure range 3.69–6.82 MPa and the temperature range 274.05–277.55 K. The experimental pressures were kept constant during hydrate formation in each experimental run. The effect of anionic surfactant (sodium dodecyl sulphate (SDS)) on natural gas storage in hydrates is more pronounced compared to a non‐ionic surfactant (dodecyl polysaccharide glycoside (DPG)). The induction time of hydrate formation was reduced with the presence of cyclopentane (CP). Cyclopentane and methylcyclohexane (MCH) could increase hydrate formation rate, but reduced hydrate storage capacity The higher methylcyclohexane concentration, the lower the hydrate storage capacity. Copyright © 2003 John Wiley & Sons, Ltd.     

横向各向同性介质中的初至波旅行时计算

本文直接采用Thomsen导出的横向各向同性介质中的相速度、群角与相角、群速度与相速度的精确函数关系,提出了一种新的具有任意各向异性强度的横向各向同性介质中的初至波旅行时计算方法,它不同于Faria等人给出的采用群速度近似公式(Byun)的仅适应弱各向异性的初至波旅行时计算方法。该新算法在计算具有任意各向异性强度的横向各向同性介质中的初至波旅行时时,并不显著地增大计算时间。分析对比由新算法得到的初至波旅行时的等值线图和由交错网格有限差分波场模拟得到的波场快照表明,无论是对弱各向异性还是对强弱各向异性,新算法都具有较高的精度;随着各向异性强度的增大,新算法的计算结果与采用近似公式计算结果的差值也随之增大。     

Optimal and self‐tuning fusion Kalman filters for discrete‐time stochastic singular systems

Based on the optimal fusion estimation algorithm weighted by scalars in the linear minimum variance sense, a distributed optimal fusion Kalman filter weighted by scalars is presented for discrete‐time stochastic singular systems with multiple sensors and correlated noises. A cross‐covariance matrix of filtering errors between any two sensors is derived. When the noise statistical information is unknown, a distributed identification approach is presented based on correlation functions and the weighted average method. Further, a distributed self‐tuning fusion filter is given, which includes two stage fusions where the first‐stage fusion is used to identify the noise covariance and the second‐stage fusion is used to obtain the fusion state filter. A simulation verifies the effectiveness of the proposed algorithm. Copyright © 2008 John Wiley & Sons, Ltd.     

Extracellular polysaccharides production by Arthrobacter viscosus

In this study the production of extracellular polysaccharides by the non-pathogenic soil bacteria Arthrobacter viscosus has been investigated. Different variables affecting extracellular polysaccharide production such as the carbon source (glucose or xylose), the agitation speed and the pH have been analysed.

In a first stage, experiments in shaken conical flasks (250 ml), containing 50 ml of culture medium, were carried out. Using xylose (25 g/l) as the carbon source at an initial pH 8 improved the extracellular polysaccharides levels obtained.

In a second stage, the experiments were scaling in bioreactors. Cultivation was carried out in discontinuous mode and with/without pH control. Polysaccharide production reached a maximum of 10 g of crude product per litre of growth medium after 14 days and the relationship between product formation and cell growth of A. viscosus is 2.7 g polysaccharide per gram biomass. This production was obtained at the optimal conditions determined with pH control at pH 7, xylose as carbon source (25 g/l) and an agitation rate of 800 rpm.     

一种采用单台微机控制的标签粘贴机

标签粘贴机是一种可自动进行标签打印和粘贴的设备装置,在工业自动化生产中有着广泛的应用.介绍了一种采用单台微机进行控制的全自动标签粘贴机的工作原理及各部分组成,以及使用过程中对其进行设置和调整的方法.该标签粘贴机已实际应用于华飞彩色显示系统有限公司29英寸彩色显像管生产线的屏网组装工序,取得了良好的效果.     

cdma1x无线子系统导频信道功率分配分析

分析了目前联通CDMA网络建设中的主要问题之一——导频功率分配问题。主要介绍了cdma 1x系统的信道类型，以及前向链路信道功率分配原则，并且对导频信道功率与无线网络覆盖和容量之间的关系进行了初步探讨。