划痕法测Ni—P合金镀层结合力的研究

本文用划痕法测定了Ni-P合金镀层的结合力;观察了划痕侧面镀层的失效形式;分析了三种评定结合力的参数。结果指出,临界载荷L_C、平均应力σ_A用于评定Ni-P镀层的结合力是有条件的,而B-W公式存在的问题更多。     

An extension of Wagner's analysis of competing scale formation

Wagner's criterion to predict the minimum concentration of solute (N _B(min) ⁰ )necessary for the exclusive formation of its scale has been modified to incorporate both thermodynamic and kinetics requirements. The analysis presented here involves a receding alloy/scale interface for which the composition of the alloy at this interface is governed by thermodynamic equilibrium between the two competing scale phases and the base alloy. This is a more rigorous analysis than that of Wagner's, who assumed the alloy/scale interface to be immobile and the solute composition at the interface to be zero. A comparison is made between values of N _B(min) ⁰ found experimentally and those predicted by Wagner's and the present criterion for a number of alloy-gas systems. It is shown that the criterion developed in the present analysis can often provide a better approximation of the actual N _B(min) ⁰ .The expressions derived from the present analysis have been extended also in a semiquantitative manner to provide a criterion for the minimum amount of solute in the alloy required for the transition from internal to external scale formation.     

（Sm，Er）-α-Sialon陶瓷材料显微结构与性能研究

采用热压烧结方法制备了Ln1.0／3Si9．3Al2.7O1．7N14．3的Ln-α-Sialon（Ln=Sm和Er）陶瓷。研究了不同Sm：Er摩尔比和外加2．5％（质量分数，下同）的相同稀土氧化物对Ln-α-Sialon陶瓷显微结构和力学性能的影响，并借助XRD、SEM、EDS对样品的物相、显微结构进行了表征。结果表明：随着Sm：Er摩尔比值的减小，α-Sialon晶粒形貌逐渐由等轴状变成长柱状，显微硬度逐渐变大，最高值为19．5GPa，抗折强度和断裂韧性逐渐降低。在原始配方的基础上外加2．5％的同种稀土氧化物能进一步促进长柱状α-Sialon晶粒的生长，力学性能得到不同程度的提高。     

High-temperature sulfidation of Fe-30Mo alloys containing ternary additions of Al

Fe-30Mo alloys containing up to 9.1 wt% Al were sulfidized at 0.01 atm sulfur vapor over the temperature range of 700–900°C. The sulfidation kinetics followed the parabolic rate law for all alloys at all temperatures. For alloys containing small and intermediate amounts of Al (<4.8 wt.%), a duplex sulfide scale formed. The outer layers of the scales were found to be relatively compact FeS in all cases; whereas the inner layers were composed of the layered compound MoS ₂ (intercalated with iron), the Chevrel compound Fe _x Mo ₆ S ₈,a spinel double sulfide Al _x Mo ₂ S ₄,depending on the Al content of the alloy and the sulfidation temperature. Extremely thin scales were found on the alloys with higher Al contents. Accordingly, extremely slow sulfidation rates were observed—even slower than the sulfidation rate of pure Mo. The transition of the sulfidation kinetics from a high-rate active mode to a low-rate passive mode requires both a critical Al content in the alloy and a critical Mo content. Because of the two-phase nature of the alloys, the latter requirement implies a critical volume fraction of the intermetallic second-phase in the alloy, which has been known as the multiphase effect. Interestingly, the multiphase effect in these alloys was also a function of the Al content in the alloys.     

EDXRF法直接测定氧化物陶瓷材料组分

叙述了用能量色散X射线荧光法(EDXRF)同时测定氧化物陶瓷材料组分的分析方法。该方法对样品无损，可直接测定ZrO2 Y2O3，ZrO2 CaO，ZrO2 Y2O3 CaO 3种陶瓷材料中的CaO，Y2O3和ZrO2；该方法快速、简便、可适用于粉末混合料和经高温烧结后的上述3种陶瓷材料；测定各组分的含量范围为：2％-25％的CaO，1．5％-20％的Y2O3，70％-98％的ZrO2，测定CaO和Y2O3的相对标准偏差好于2％，测定ZrO2的相对标准偏差好于1％。     

不同钛碳摩尔比和铝含量对Ti－Al－C体系燃烧合成Ti3AlC2粉体的影响

以Ti，Al，C和TiC粉末为原料，研究了钛碳摩尔比和Al含量对Ti—Al—C体系燃烧合成产物相组成的影响。实验表明，不同的钛碳摩尔比和Al含量变化，对Ti-Al—C体系燃烧合成Ti3AlC2粉体有很大影响。当Ti／C=1或1．5时，燃烧产物主晶相是TiC，与原料中Al含量变化关系不大；Ti／C=2和Ti／C=3时，主晶相分别是Ti3AlC2和Ti2AlC，它们的衍射峰强度均分别随原料中Al含量增加而增强，当Al含量增加到一定量后，Ti3AlC2和Ti2AlC的衍射峰强度均又减弱；TiC是Ti-Al-C体系燃烧合成Ti3AlC2相的中间产物。     

A machine vision approach to seam tracking in real-time in PAW of large-diameter stainless steel tube

Manual monitoring and seam tracking through watching weld pool images in real-time, by naked eyes or by industrial TV, are experience-depended, subjective, labor intensive, and sometimes biased. So it is necessary to realize the automation of computer-aided seam tracking. A PAW (plasma arc welding) seam tracking system was developed, which senses the molten pool and the seam in one frame by a vision sensor, and then detects the seam deviation to adjust the work piece motion adaptively to the seam position sensed by vision sensor. A novel molten pool area image-processing algorithm based on machine vision was proposed. The algorithm processes each image at the speed of 20 frames/second in real-time to extract three feature variables to get the seam deviation. It is proved experimentally that the algorithm is very fast and effective. Issues related to the algorithm are also discussed.     

球磨对ZrO2（Y2O3）超细粉末性能的影响

以共沉淀法制备煅烧态ＺｒＯ２（Ｙ２Ｏ３）超细粉末为研究对象，研究了球磨对其物理和烧结性能的影响，结果表明，球磨虽可以有效地减小粉末的团聚尺寸，但对粉末一次颗粒尺寸的的影响不大，球磨可以显著增加团聚程度较严重的锻烧态粉末的比表面积，但对团聚程度较轻的粉末，其影响大：球磨还可显著减小粉末的晶粒尺寸，这与粉末在球磨过程中发生了相变有关。此外，对团聚较严重的粉末，球磨可改善其烧结性能，但对团聚程度较轻的粉     

稀盐酸中锰结核还原浸出溶液净化除铁

针对酸性氯化物中黄铁矿还原浸出锰结核的溶液成分特点，选择黄钠铁矾法进行了沉淀分离铁的研究。结果表明温度和晶种以及溶液ｐＨ值是影响铁矾沉淀的重要因素。在ｐＨ２．０左右，溶液温度高于９０℃，足量晶种加入的情形下，１５０ｍｉｎ后可将溶液中的铁含量降至０．１ｇ／Ｌ。沉矾过程的表观活化能为９４．６６ｋＪ／ｍｏｌ。黄铁矿氧化生成的硫酸根随铁一同沉淀，从而消除了ＳＯ２－４在氯化物体系中的积累。     

EFFECT OF STRENGTH ON CORROSION FATIGUE BEHAVIOUR OF LOW ALLOY STEELS IN ARTIFICIAL SEAWATER

本文应用断裂力学及电化学等方法,研究了通过不同回火温度处理具有不同强度水平的34CrNi3Mo和40CrNiMo钢在人造海水中的腐蚀疲劳(CF)和应力腐蚀开裂(SCC)行为。试验结果表明,钢的强度对CF和SCC行为有着强烈的作用。随着钢屈服强度σ_s的提高,钢在海水中的SCC敏感性增大,腐蚀疲劳裂纹扩展速率dα/dN剧增。低合金钢在海水环境中的CF行为与SCC行为密切相关,而在CF条件下可促进钢的SCC敏感性。