Dissolution of perfluoroalkyl oligomers in lubricating oil for enhancing wear resistance and fuel economy

Perfluorobutyl-1,1,2-tri-H-1-hexene and perfluoroalkyl methacrylate have been solubilized in lubricating oil by single-step free radically grafting onto poly(ethylene-co-propylene). Perfluoroalkyl-1,1,2,2-tetra-H-ethanol and perfluoropolyether carboxylic acid were solubilized by condensing with poly[(ethylene-co-propylene)-g-glycidyl methacrylate], generating the corresponding perfluoroalkyl ether or ester, respectively. Solubilization of 1,1,2,2-tetra-H-ethanol was also achieved by condensing with poly[(ethylene-co-propylene)-g-2-isocyanoethyl methacrylate] to the corresponding perfluoroalkyl urethane. Scar diameter reductions ranged from 9.4 to 58% using perfluoro-modified graft copolymers as determined using the Four Ball Wear Test, although optimum reductions were obtained using perfluoroalkyl urethane-modified graft copolymers. Moreover, a semiquantitative correlation of scar reductions and thermal instability was determined. Sequence VI engine testing of perfluoroalkyl urethane graft copolymers containing pendant perfluoroalkyl chain lengths of 8.2 and 7.2 had an Equivalent Fuel Economy Index of 4.33 and 4.27, respectively. © 1994 John Wiley & Sons, Inc.     

Acceleration or retardation to crystallization if liquid-liquid phase separation occurs: Studies on a polyolefin blend by SAXS/WAXD, DSC and TEM

Blends of statistical copolymers containing ethylene/hexene (PEH) and ethylene/butene (PEB) exhibited the behavior of upper critical solution temperature (UCST). The interplay between the early and intermediate stage liquid-liquid phase separation (LLPS) and crystallization of the PEH/PEB 50/50 blend was studied by time-resolved simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) techniques. Samples were treated by two different quench procedures: in single quench, the sample was directly quenched from 160 °C to isothermal crystallization temperature of 114 °C; while in double quench, the sample was firstly quenched to 130 °C for 20 min annealing, where LLPS occurred, and then to 114 °C. It was found that in the early stage of crystallization, the integrated values of Iq² and crystallinity, X_c, in the double quench procedure were consistently higher than those in the single quench procedure, which could be attributed to accelerated nucleation induced by enhanced concentration fluctuations and interfacial tension. In the late stage of crystallization, some morphological parameters were found to crossover and then reverse, which could be explained by retardation of lamellar growth due to phase separation formed during the double quench procedure. This phenomenon was also confirmed by DSC measurements in blends of different compositions at varying isothermal crystallization temperatures. The crystal lamellar thickness determined by SAXS showed a good agreement with TEM observation. Results indicated that the early stage LLPS in the PEH/PEB blend prior to crystallization indeed dictated the resulting lamellar structures, including the average size of lamellar stack and the stack distribution. There seemed to be little variation of lamellar thickness and long period between the two quenching procedures (i.e., single quench versus double quench).     

Influence of air oxidation on the pressure exerted by coking coals during carbonization

The effects of air oxidation of three Spanish coals on the pressure exerted during carbonization have been studied. Coals were oxidized by air in an oven at 120 and 140 °C. The extent of oxidation was assessed by the Audibert-Arnu dilatometer test. Coal samples oxidized at different levels were subjected to the Koppers-lncar laboratory coking pressure test. The results obtained indicated that for coals classified as ‘dangerous’ the ‘danger’ increased and reached a maximum at a certain level of oxidation, after which it decreased sharply. This behaviour did not occur with coals classified as safe.     

Breaking Bad in Cyberspace: Understanding why and how Black Hat Hackers Manage their Nerves to Commit their Virtual Crimes

Information Systems Frontiers - What is happening in hacker’s minds when they are committing criminal activities? How black hat hackers manage nerves, which is about managing fear and...     

Popular News Are Relevant News! How Investor Attention Affects Algorithmic Decision-Making and Decision Support in Financial Markets

Algorithmic decision-making plays an important role in financial markets. Current tools in trading focus on popular companies which are discussed in thousands of news items. However, it remains unclear whether methodologies from the field of data analytics relying on large samples can also be applied to small datasets of less popular companies or whether these methodologies lead to the discovery of meaningless patterns resulting in economic losses. We analyze whether the impact of media sentiment on financial markets is influenced by two levels of investor attention and whether this impacts algorithmic decision-making. We find that the influence differs substantially between news and companies with high and low investor attention. We apply a trading simulation to outline the practical consequences of these interrelations for decision support systems. Our results are of high importance for financial market participants, especially for algorithmic traders that consider sentiment for investment decision support.

     

Effects of Al:Si and (Al + Na):Si ratios on the properties of the international simple glass,part II: Structure

High-alumina containing high-level waste (HLW) will be vitrified at the Waste Treatment Plant at the Hanford Site. The resulting glasses, high in alumina, will have distinct composition-structure-property (C-S-P) relationships compared to previously studied HLW glasses. These C-S-P relationships determine the processability and product durability of glasses and therefore must be understood. The main purpose of this study is to understand the detailed structural changes caused by Al:Si and (Al + Na):Si substitutions in a simplified nuclear waste model glass (ISG, international simple glass) by combining experimental structural characterizations and molecular dynamics (MD) simulations. The structures of these two series of glasses were characterized by neutron total scattering and ²⁷Al, ²³Na, ²⁹Si, and ¹¹B solid-state nuclear magnetic resonance (NMR) spectroscopy. Additionally, MD simulations were used to generate atomistic structural models of the borosilicate glasses and simulation results were validated by the experimental structural data. Short-range (eg, bond distance, coordination number, etc) and medium-range (eg, oxygen speciation, network connectivity, polyhedral linkages) structural features of the borosilicate glasses were systematically investigated as a function of the degree of substitution. The results show that bond distance and coordination number of the cation-oxygen pairs are relatively insensitive to Al:Si and (Al + Na):Si substitutions with the exception of the B-O pair. Additionally, the Al:Si substitution results in an increase in tri-bridging oxygen species, whereas (Al + Na):Si substitution creates nonbridging oxygen species. Charge compensator preferences were found for Si-[NBO] (Na⁺), ^[3]B-[NBO] (Na⁺), ^[4]B (mostly Ca²⁺), ^[4]Al (nearly equally split Na⁺ and Ca²⁺), and ^[6]Zr (mostly Ca²⁺). The network former-BO-network former linkages preferences were also tabulated; Si-O-Al and Al-O-Al were preferred at the expense of lower Si-O-^[3]B and ^[3]B-O-^[3]B linkages. These results provide insights on the structural origins of property changes such as glass-transition temperature caused by the substitutions, providing a basis for future improvements of theoretical and computer simulation models.     

Electric field assisted solid-state interfacial joining of TaC-HfC ceramics without filler

The application of ultra-high-temperature ceramics (UHTCs) demands effective ways of joining in overcoming the problems associated with the fabrication of complex-shaped components. In this study, we choose to investigate a new method of rapidly joining pre-sintered TaC and HfC ceramics without any filler material using the spark plasma sintering (SPS) technique. A well-bonded TaC–HfC interface was observed with no apparent cracking and porosity at the joint. The joining mechanisms were predominantly driven by solid-state diffusion and localized plastic deformation. The nanomechanical properties of the TaC-HfC joint are better than the HfC while comparable to that of the TaC. High-load indentation (up to 200 N) results suggest that the TaC–HfC interface is stronger than the parent UHTCs with no crack propagating at the interface. Upon comparison with the parent UHTCs, the damaged area and the average crack length at the interface, reduced up to ~94% and ~56%, respectively. This study shows that the SPS technique can also apply to joining other UHTCs without any filler, resulting in the new field of developing complex components for the thermal protection system (TPS).     

Polyester functionalization for mycobacterial capture

Tuberculosis (TB) is one of the deadliest diseases known to man and ranks among the top ten global causes of fatalities. Children often develop a paucibacillary form of this disease which makes diagnosis arduous even with the aid of sophisticated techniques. In these cases, the concentration of bacteria in their sputum falls below the lowest limit of detection for sputum smear microscopy, the technique predominantly used in developing countries. In this study we aim to test the hypothesis that modifying a polymer, often used in buccal swabs, could assist in creating a capturing and concentrating oral swab for Mycobacterium tuberculosis (Mtb), the pathogenic bacterial species responsible for TB. Such a device will assist in meeting the detection limit and allow for rapid detection of the disease. The polymer used was a micro fibrous form of poly(ethylene terephthalate) (PET) which was surface functionalized with Concanavalin A (Con A), a lectin based adhesin with an affinity for the mannose groups on the Mtb cell wall. The functionalization was mediated with glutaraldehyde as bioconjugate molecule and found to produce a surface uniformly covered with Con A. Affinity studies between the modified fibers and the Mycobacterium bovis bacillus Calmette-Guérin (BCG), as Mtb mimic, were conducted to evaluate the capturing abilities of the substrate. The results indicate that the fibers avidly captured BCG and that the fibrous matrix aided in its function. Dilution studies showed successful capturing of the bacterial species at concentrations characteristic of paucibacillary cases. In this study a commercial polymeric material was successfully surface modified with a biological entity to create a substrate to which Mtb could adhere and accordingly be captured.     

Type IV culture or,is it possible to define a framework for universal creativity?

ABSTRACT

The radical limit of post-anthropocentric creativity is a mode of completely nonhuman creative endeavour. Yet, the anthropocentrism prevails and conceptions of radically different civilisations and cultures are defined by current human thought that shapes and limits the understanding of what a genuinely alternative cultural production might entail. This article uses the Kardashev scale of civilisations, classified according to energy consumption at the planetary, stellar and galactic scales to consider culture beyond the current limits of an inherently anthropocentric perspective. In considering microdimensional, informational and universal extensions of Kardashev's scale, critical reflections on the anthropocentric limits of cultural epistemology create an opportunity to posit a universal framework of creativity.