《石油沥青纸胎油毡》国家标准的修订

《石油沥青纸胎油毡》国家标准进行了第三次修订。本文介绍了修订的理由、修订的内容与依据，并与国内外同类产品标准进行了比较。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

HybMig: A Hybrid Approach to Dynamic Plan Migration for Continuous Queries

In data stream environments, the initial plan of a long-running query may gradually become inefficient due to changes of the data characteristics. In this case, the query optimizer generates a more efficient plan based on the current statistics. The online transition from the old to the new plan is called dynamic plan migration. In addition to correctness, an effective technique for dynamic plan migration should achieve the following objectives: 1) minimize the memory and CPU overhead of the migration, 2) reduce the duration of the transition, and 3) maintain a steady output rate. The only known solutions for this problem are the moving states (MS) and parallel track (PT) strategies, which have some serious shortcomings related to the above objectives. Motivated by these shortcomings, we first propose HybMig, which combines the merits of MS and PT and outperforms both in every aspect. As a second step, we extend PT, MS, and HybMig to the general problem of migration, where both the new and the old plans are treated as black boxes     

龙滩水电站左岸地下引水发电系统开挖支护

龙滩水电站左岸地下引水发电系统工程规模浩大,在0.5 km 2的范围内共布置有119条洞室。这些洞室在空间重叠,平竖相贯,形成庞大复杂的地下洞室群,且主要洞室尺寸庞大,其中地下厂房是目前世界上规模最大的地下厂房。龙滩水电站引水发电系统主要洞室的开挖支护方法,可供其他类似工程参考借鉴。     

BAS设计中的误区

文章结合实际经验,就BAS设计中存在的一些误区进行探讨,详细介绍在BAS设计中关于系统集成、DDC配置、设备控制及选择等方面容易出现的问题,并给出了解决问题的办法。     

集中供热优化节能自动控制系统的特点

国家十一五规划中明确指出:五年内节能20%。根据供热系统耗能比重和现状,集中供热的节能潜力非常大。安装优化节能集中供热控制系统,并依此提高运行管理水平,可取得事半功倍的节能效果。基于多年持久的调查、研究、试验、产品开发和实际应用,我们体会到:只有从集中供热的特点出发,才能使集中供热控制系统既可靠又简单、价低,达到既确保人体舒适又真正节能的目标。本文将对集中供热优化节能控制系统在热力学模型、计算机控制方案、节能效果、可靠性和软硬件选择原则等方面的特点进行介绍。     

A Single-Die 124 dB Stereo Audio Delta-Sigma ADC With 111 dB THD

This paper presents a highly power-efficient stereo delta-sigma ADC designed for high-precision applications, with measured inter-channel isolation over 130 dB. This design adopts a single-loop, fifth-order, 33 level analog modulator with positive and negative feedforward paths. An interpolated multilevel quantizer with unevenly weighted quantization levels replaces a conventional 5-bit flash type quantizer. These new techniques suppress signal dependent energy inside the delta-sigma loop, reduce internal channel coupling and power consumption. Manufactured in 0.35 mum double poly, three metal CMOS process, the single-die chip includes two analog modulators, on-chip bandgap reference circuit, decimation filter and serial interface circuits. The core die area is around 14.8 mm². The ADC achieves 124 dB dynamic range (A-weighted), -111 dB THD over 20 kHz bandwidth. Total power consumption is less than 330 mW.     

超低碳奥氏体不锈钢00Cr18Ni10还原脱磷研究

在 2 5kg真空感应炉上用镁钙合金对超低碳奥氏体不锈钢 0 0Cr18Ni10进行了还原脱磷试验。通过充入工业纯氩使炉内压力为 6 6 .6 6kPa和精炼时的反应温度 14 5 0～ 15 0 0℃ ,加入镁钙合金 5 0kg t和助熔剂CaF2 11kg t,可使精炼后 0 0Cr18Ni10的磷含量进一步降低到 (5 0～ 6 0 )× 10 - 6 ,钢中氧、硫含量分别稳定降到(4～ 6 )× 10 - 6 和 15× 10 - 6 。     

Electrochemical determination of estradiol using a poly(l-serine) film-modified electrode

A thin film of poly(l-serine) was prepared via electropolymerization for the determination of trace levels of estradiol. In pH 5.0 phosphate buffer, l-serine was oxidized during the cyclic potential sweeps between −0.60 and 2.0 V, forming a thin film at the electrode surface. The electrochemical behavior of estradiol was investigated. The oxidation peak potential of estradiol shifts negatively at the poly(l-serine) film-coated glassy carbon electrode (GCE) compared with that at the bare GCE. Otherwise, the oxidation peak current greatly increases at the poly(l-serine) film-modified GCE. These phenomena suggest that the poly(l-serine) film exhibits catalytic activity towards the electrochemical oxidation of estradiol. Based on this, a sensitive, rapid and simple electrochemical method was proposed for the determination of estradiol. The limit of detection is evaluated to be 2.0 × 10⁻⁸ mol L⁻¹. Finally, this method was successfully used to determine estradiol in blood serum.