Formation of a protective layer against corrosion on Mg alloy via alkali pretreatment followed by vanillic acid treatment

Although Mg alloy possesses high specific strength, low density, and good biocompatibility, poor corrosion resistance hinders its further applications. In the present study, an innovative protective layer against corrosion was prepared on the AZ31 Mg alloy via alkali pretreatment followed by vanillic acid treatment. The alkali pretreatment supplied –OH for the AZ31 Mg alloy surface to react with vanillic acid. The vanillic acid treatment played a crucial role in enhancing the corrosion resistance due to the excellent ability to act as a barrier and retard aqueous solution penetration, which effectively isolated the underlying Mg alloy from the corrosive environment. The corrosion current density of alkali and vanillic acid-treated Mg alloy (AZ31V) almost showed two orders of magnitude lower values in comparison with that of the AZ31 Mg alloy, and the corrosion potential of AZ31V Mg alloy increased from −1.41 to −1.25 V. The immersion tests proved that there was no occurrence of severe corrosion. Hence, the alkali pretreatment and vanillic acid treatment may represent a promising method to improve the corrosion resistance of Mg alloy.     

高盐高有机制药废水污泥电渗透高干脱水

为研究高盐高有机制药废水污泥的电渗透脱水效果，深入认识化学污泥的电脱水过程，本文采用电渗透高干脱水技术对经抽滤脱水的高盐高有机制药废水化学污泥进行深度脱水，考察了泥饼初始pH的改变对污泥电渗透高干脱水过程中阴阳极污泥的含水率、电流、电导率、pH、zeta电位与能耗的影响，验证了对高盐高有机制药废水污泥实行电渗透高干脱水的可行性，解析了化学污泥电渗透脱水过程的机制。结果表明，泥饼pH为2、3、4时，zeta电位为正值，电渗流反向流动，无法脱水；pH增至5时，zeta电位为负值，电渗流从阴极脱除，污泥含水率从53.2%降至44.8%，脱水效果最好；但pH增至6时，脱水量有所降低。污泥电导率随pH的增加而降低。pH为5时初始电流最大。脱水15min时，即污泥含水率降至45.5%时，能源利用率最高。     

基于强化学习的电力市场信息披露程度对市场成员交易行为影响研究

基于信息披露的主体框架，分析披露体系中具体的供需信息对于市场成员的引导作用。建立日前市场的双层竞价优化模型，采用强化学习的方法，通过市场中有无关键供求信息披露对于发电商报价预期的影响，推演模拟不同信息披露程度下发电商报价行为，然后从策略演化过程、策略偏离度以及策略收敛速度3个角度进行信息披露程度对市场成员交易行为影响的定量分析，验证市场供需信息的发布程度对于市场成员的引导作用，最后基于推演结果进行总结，并对我国信息披露的建设提出建议与思考。     

带有方形肋及双倾斜肋片的细通道内流动、传热和熵产分析

为了探究带有方形肋及双倾斜肋片细通道的流动换热及熵产特性，设计了2种带有方形肋及双倾斜肋片的组合细通道(MCDS-L, MCDS-R)，然后采用数值模拟的方法分析其流动特性、传热特性和熵产特性，并将其分析结果同2种方形肋细通道(MCS-L, MCS-R)和一种双倾斜肋片细通道(MCD)进行对比。结果表明，在所研究的雷诺数范围内，组合通道的摩擦阻力系数基本一致且均高于其他3组通道(MCS-L, MCS-R, MCD) 。此外，组合通道的努塞尔数均高于其他3组通道，而熵产增大数均低于其他3组通道。其中，MCDS-L通道的努塞尔数最大，熵产增大数最低。表明MCDS-L通道的换热效果最佳，能量的综合利用程度最高。研究成果为微细通道热沉的设计提供参考。     

Effect of ultrasonic vibration on thermal and material flow behavior,microstructure and mechanical properties of friction stir welded Al/Cu joints

Al/Cu dissimilar joint has been widely produced by using friction stir welding (FSW), but the weld quality remains limited. A recently developed ultrasonic     

某露天矿山边坡结构参数优化与支护设计

某露天矿山东帮边坡稳定性较差,已有12个区域出现大面积滑坡或垮塌,导致东帮边坡部分平台不连通,给矿山生产造成了严重的安全隐患。基于此,以边坡安全系数控制值为边坡稳定评判标准,采用极限平衡法、Geo-Slope软件计算边坡安全系数,分析边坡整体与局部的稳定性,并对不稳定区域进行参数优化研究,结果表明:东帮边坡整体滑坡的概率较低,但局部稳定性较差,需采取防护措施;边坡结构参数经优化后,边坡整体处于稳定状态。     

Tensor Q-rank: new data dependent definition of tensor rank

Machine Learning - Recently, the $${ Tensor}~{ Nuclear}~{ Norm}~{ (TNN)}$$ regularization based on t-SVD has been widely used in various low tubal-rank tensor recovery tasks. However, these models...     

Transformation of the reabsorption characteristics of lignite treated by low and high temperature drying process

Abstract

The reabsorption characteristics of the lignite treated by low and high temperature drying process were addressed in the paper. The information about the moisture form, functional groups, effective water-filled porosities and equilibrium moisture content of the lignite before and after the drying process was investigated using Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and a self-made reabsorption device, respectively. The results show that the low drying temperature (140, 190, 230?°C, 10?min, N₂) has little impact on the effective water-filled porosities of the resulted samples, whereas it has a great influence on the main oxygen-containing functional groups, which amount firstly decreases and then increases with the drying temperature increasing. In the case of the lignite samples dried under high-temperature (600, 700, 800?°C, 30?s, N₂), the amount of the effective water-filled porosity of the sample decreases and the amount of oxygen-containing functional groups increases as the temperature increasing. The reabsorption capability of the high temperature dried sample is much lower than that of the sample treated under low drying temperature. The reabsorption characteristics of the low-temperature dried samples are affected by the amount of the oxygen-containing functional groups, while the effective water-filled porosity is main factor for the lignite samples derived from high temperature drying process. Moreover, the work gives a good evidence that the high-temperature drying process is an effective choose for lignite upgrading.     

HiPerCem水泥对刚玉-尖晶石浇注料抗渣性的影响

以板状刚玉、尖晶石细粉和活性α-Al2O3微粉为主要原料,使用HiPerCem水泥作为结合剂制备刚玉-尖晶石浇注料,对比研究了HiPerCem水泥与Secar71及CMA72水泥在浇注料中的凝结行为及其对浇注料常温物理性能、抗渣性能的影响.结果 表明,在保持引入浇注料中一铝酸钙含量为1.8％,尖晶石含量为10％的情况下,HiPerCem水泥结合浇注料的凝结速度居中,脱模及烘干强度较另外2种水泥结合浇注料的低.抗渣侵蚀实验表明,以HiPerCem水泥为结合剂的浇注料因引入的CaO含量较CMA72和Secar71水泥结合浇注料低,大尺寸气孔少,具有较好的抗渣性;而CMA72水泥结合浇注料因试样中大尺寸气孔比例较高,熔渣渗透严重,未能发挥出其水泥中微晶尖晶石相改善抗渣性的优势.