灞河生态治理工程模型试验研究

通过模型试验 ,对位于西安市东郊因采沙使河道破坏严重的灞河河段进行了复现试验和研究 ,并以此为依据 ,通过优化比较为设计部门提供了合理的橡胶坝坝址和坝座高程。在此基础上 ,又对建坝后橡胶坝对上下游冲淤变化的影响进行了试验研究和分析 ,解决了工程设计中的一些关键技术问题     

Characterization of charge trapping in submicrometer NMOSFET's bygate capacitance measurements

Trapping of net positive charge at low gate stress voltage, and of net negative charge at high gate stress voltage, is observed through changes in the gate-to-drain capacitance of the stressed junction. These observations can be explained in terms of electron trapping, hole trapping, and generation of acceptor-like interface states located in the upper half of the bandgap. Channel shortening is also observed and found to exhibit a logarithmic time dependence     

碎煤齿环堆焊材料与工艺研究

通过对碎煤齿环的失效分析 ,找出了影响齿环寿命的因素及薄弱环节 ,并研制成功了最优成分的耐磨材料和堆焊工艺 ,显著提高了生产率和企业的经济效益     

微机传真系统

本文介绍了集传真技术、通信技术、微型计算机技术于一体的微机传真系统，提出了微机传真系统在硬件接口及报表识别上的实现方法。     

T_C≥400°C高温PTC陶瓷的研制

利用国产原料，采用传统的陶瓷材料制备工艺，研制了居里温度ＴＣ≥４００°Ｃ的高温ＰＴＣ陶瓷，制成了居里温度ＴＣ＝４１２°Ｃ，电阻Ｒ≤１０３Ω，ｌｇ（Ｒｍａｘ／Ｒｍｉｎ）＝４的高性能ＰＴＣ热敏陶瓷材料     

油溶性减阻功能聚合物的研制

介绍了以混合α-烯烃为原料,制备了具有减阻功能的共聚物。讨论了催化剂浓度、聚合温度、预聚合时间、原料单体中杂质含量对共聚物特性粘度和转化率的影响。试验表明,在较低的催化剂浓度和预聚合温度下,能得到较高分子量的聚合物。气相色谱法和DSC法测定其组成和单体混合物的组成基本一致,表明共聚物是一种无规的梳状结构聚合物。该聚合物达到较高特性粘度时,能获得较好的减阻率。     

Urban radiowave propagation: a 3-D path-integral wave analysis

A discussion concerning the need for three-dimensional (3-D) urban radiowave propagation models is presented and followed by a review of previously published work on this topic using the asymptotic path-integral technique. The limitations and advantages of this technique are explained and it is applied to study diffraction by a small number of canonical geometries. The validity of this technique is verified by comparison with controlled laboratory measurements taken at millimetric wave frequencies. Finally, its ability to classify field components according to their distribution in space is employed in order to analyze the observed field strength distributions in the model environments     

The oxidative inducation test applied to medical PVC and other polymers

We have examined the applicability of this simple and effective test to polymer systems widely used in the medical industry. First, it was found that not every polymer examined exhibited a distinct onset of autocatalytic oxidation detectable by DSC. However, for cases where distinct onsets are found, powerful insights can be obtained. These included activation energy of the degradation, thermal oxidative shelf life prediction, and correlation, with product performances. Actual examples are presented to illustrate the utility of the test.