Study on flow-induced vibration of head–disk assembly mechanisms in actual hard disk drive

Achieving ultra-high magnetic-recording density in hard disk drives (HDDs) requires clarification of flow-induced vibration issues. In particular, it is necessary to reduce the flow-induced disk vibration called disk flutter. Thus far, however, there has been no experimental research related to disk flutter in actual HDDs. For this study, therefore, the disk-flutter issues have been studied experimentally, using an actual 2.5-in. HDD with one disk and two magnetic heads. The aim was to study the effect of operating magnetic-head mechanisms on flow-induced disk flutter. This study evaluated disk flutter as well as static pressure distribution in the actual HDD, by taking measurements while changing the operating modes of the magnetic-head mechanism as well as the number of operating air-bearing sliders. The study demonstrated that the disk-flutter amplitude increases and its frequency decreases when the magnetic-head mechanisms are operating. It was also found that the amount of decrease in the disk-flutter frequency depends on the number of operating air-bearing sliders whose amplitude increase varies with the specific operating mode of the head mechanisms, such as whether it is in track-following or seek modes. In addition, operation of the magnetic-head mechanisms generated non-uniform static pressure distribution within the HDD. These factors suggest that a decrease in disk-flutter frequency results from the slider-coupled vibration and an increase in disk-flutter amplitude results from the static pressure changes as well as air-following changes, as these vary with the actual operation of the disk head mechanism. From these experimental results, it appears that the disk-flutter issues in actual HDDs should be considered as a system that includes the operation of the magnetic-head mechanisms and disk-coupled vibration.     

Simultaneous Measurements of an Ultrasound and a Torsional Oscillator for 4He in a Nanoporous Glass

Previously, we carried out ultrasonic measurements for liquid ⁴He filled in a nanoporous glass (Gelsil), and observed an increase in the sound velocity due to decoupling of the superfluid component. At zero pressure, the superfluid transition temperature T _C is suppressed to 1.4 K from the bulk lambda point, 2.17 K. This behavior is the same as torsional oscillator measurements by Yamamoto et al. (Phys. Rev. Lett. 93:075302, 2004). However, the pressure dependence of T _C and the temperature dependence of the superfluid fraction are very different from the torsional oscillator measurements. In order to clarify the origin of the difference, we have developed a new technique of simultaneous measurement of an ultrasound and a torsional oscillator, and the system successfully works for a nanoporous glass. Here, we compare decoupling of the superfluid component for ⁴He films between an ultrasound and a torsional oscillator.     

Fast Labelling of Natural Scenes Using Enhanced Knowledge

A new technique for labelling natural scenes is proposed. This technique labels disjoint regions on an image of a natural scene on the basis of knowledge about the relationship among objects. The proposed technique consists of three stages: (1) segmentation, (2) initial labelling, and (3) label improvement. One of the most promising previous techniques uses simulated annealing to find the solution, while our technique uses local hill-climbing with enhanced knowledge for speeding up the processing. Local hill-climbing is known to be easy to be captured by a local minimum. We solved this problem by enhancing the knowledge being used as constraints for the search. Our knowledge represents 1-to-n relationships among regions, pair-wise relationships of regions, and relative locations of the regions to the image. In addition, we introduced two region features: an entropy in intensity; and a linearity of contours of each region. The linearity evaluation aims to distinguish artificial objects from natural objects. The validity of the technique is supported by some experiments. These experiments showed that the proposed technique is much faster with the almost same accurate.     

A Moment Method for Evaporation Using a Logarithmic Size Distribution with the Smallest Size

A moment method of the log-normal distribution with the smallest size is applied to evaporation by newly introducing correction factors obtained from the error function. In this article, the improved moment method is tested for the evaporation, and is compared with the exact solutions calculated by the CIP semi-Lagrangian (CIP-SL) method. In small particle regime, the size distributions and the time histories of the total number and volume per unit volume are reproduced by the moment method for the evaporation near the smallest size. In large particle regime, however, the differences between the moment and exact solutions are larger with time, after the exact distribution spreads to the smallest size. This new moment solver can reproduce the evaporation near the smallest size even when large time step size is given, and thus is expected to be used for the parameterization of the evaporation of small particles in aerosol-transport model.     

Remarkable enhancement in durability of Pd/H-ZSM-5 zeolite catalysts for CH4-SCR

Effect of second components on the catalytic performance of Pd/H-ZSM-5 zeolite (Pd: 0.4 wt.%) was evaluated by a durability test of NO reduction with CH₄ at a relatively high temperature of 500°C in the presence of water vapor for a prolonged period. The Pd/H-ZSM-5 showed high stable activity for this reaction without H₂O in the reactant feed, while immediate and irreversible deactivation was observed in the presence of H₂O, resulting in no activity after 7 h. The second components such as Co, Rh, Ag, Ce, and Fe introduced individually to the Pd/H-ZSM-5 enhanced the durability, and in particular the addition of 3.3 wt.% Co led to a stable NO conversion for more than 40 h in the presence of H₂O.     

Absorption spectra and tautomerism of aminonaphthazarins

2-n-Butylaminonaphthazarin (2) absorbs at 499 and 532 nm in ethanol but at 539 and 577 nm in alkali solution, while 2, 6-bis(n-butylamino)naphthazarin (3) absorbs at 461, 500 and 540 nm in ethanol but at 511 and 545 nm in alkali solution, with only a small bathochromic shift of 5 nm. The absorption curve of 3 was changed by addition of alkali and the λD_max at around 461 nm completely disappeared. In the case of 2-bromo-3, 6-bis(n-butylamino)naphthazarin (4), tautomerism between the 1, 4-quinone and 1, 5-quinone forms was observed and the isosbestic point was observed at 480 nm. Dye 2 easily deprotonated to give the 1, 4-dianion, but dyes 3 and 4 existed as tautomeric mixtures in solution and shifted to 1, 5-quinone forms in alkali solution.     

A simple and fast method to disperse long single-walled carbon nanotubes introducing few defects

A simple and fast dispersion method that incorporates heating is used to disperse long (more than 10 μm) single-walled carbon nanotubes (SWCNTs) with minimal defects. The method enables a dispersed solution of SWCNTs to be produced in less than 10 min in only three steps: (1) addition of the dispersant, (2) heating, and (3) grinding. The dispersion method does not require sonication, which shortens the SWCNTs and can generate surface defects. SWCNT films were prepared from the dispersed solution, and the films exhibited a resistance of 380 Ω/sq at a transparency of 64.8%. This dispersion method can be easily scaled up, making it useful for the preparation of dispersed SWCNTs for commercial and industrial applications.     

Production of d-glucose from pseudo paper sludge with hydrothermal treatment

To convert cellulosic organics contained in industrial paper sludge into glucose, reaction of pseudo paper sludge composed of cellulose and inorganic compounds (calcium carbonate (CaCO₃), talc (Mg₃(Si₄O₁₀)(OH)₂), kaolin (Al₂(Si₂O₅)(OH)₄)) under hydrothermal conditions was studied. Significant amounts of glucose (ca. 23%) could be produced from cellulose in the absence of CaCO₃ for reaction in water at 523 K and 12 min reaction time. On the other hand, in the presence of CaCO3, most glucose decomposed over all conditions, whereas the addition of talc and kaolin to the mixtures increased the glucose yield to about 30%. For the case of chemical recycle of paper sludge with hydrothermal treatment to obtain d-glucose, it can be concluded that it is preferable to separate the calcium carbonate from the paper sludge before hydrothermal treatment.