Fabrication and Mechanical Properties of Continuously Graded MoSi2–ZrO2(2Y) Materials Using Wet-Molding

Continuously graded MoSi₂-ZrO₂(2Y) materials with high density (97.5% of theoretical) have been fabricated by uniaxial wet-molding, followed by hot pressing (1000°C/1 h/30 MPa) and hot isostatic pressing (1400°C/2 h/196 MPa). Their composition profiles are greatly influenced by the viscosity of mixed solutions of glycerin and ethanol used as a dispersion medium; a linear compositional gradient from MoSi₂/ZrO₂(2Y) 70/30 to 20/80 mol% is obtained from the solution (50/50 vol%) with a viscosity of 20 mPa s. Vickers hardness (Hv) and fracture toughness (KIC) increase from 9.7 to 12.4 GPa and from 5.1 to 12.5 MPa m1/2, respectively, with increasing ZrO₂(2Y) composition.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Preparation of highly mesoporous carbon membranes via a sol-gel process using resorcinol and formaldehyde

This paper reports the preparation of highly mesoporous carbon membranes, which are obtained by the pyrolysis of sol-gel derived mesoporous polymer membranes using resorcinol and formaldehyde (RF). Two series of RF carbon membranes were prepared by changing the resorcinol to catalyst molar ratio. The nitrogen adsorption-desorption measurement shows that the RF carbon membranes possess a well-developed mesoporous structure with controlled pore diameters of 5.48 nm and 13.9 nm. The helium and nitrogen permeances of both RF carbon membranes were independent of the feed pressure, indicating that there was no contribution of viscous flow and the membranes are initially crack-free. The gas permeation result showed that the dominant mechanism of gas transport through both the RF carbon membranes is Knudsen diffusion. With regard to the permeation of condensable gases such as CH₄ and CO₂, it was observed that the surface flow also contributes to the total permeation.     

Synthesis of ordered mesoporous carbon thin films at various temperatures in vapor infiltration method

Mesoporous carbon thin films with ordered structures were prepared by using resorcinol-surfactant self-assembly. A mixture of resorcinol, surfactant, and ethanol coated on silicon substrates was exposed to formaldehyde vapor as a cross-linking agent to form structured resorcinol/formaldehyde resin films. The films were then carbonized at 800 °C in an inert atmosphere to remove the surfactant and to obtain structured carbon materials. With this vapor infiltration method, thin films with several structures were obtained from the same precursor solution by employing different vapor infiltration temperatures. The results were interpreted from the transformation of the self-assembly during the vapor infiltration process.     

Structural Analysis of the Complex between Penta-EF-Hand ALG-2 Protein and Sec31A Peptide Reveals a Novel Target Recognition Mechanism of ALG-2

ALG-2, a 22-kDa penta-EF-hand protein, is involved in cell death, signal transduction, membrane trafficking, etc., by interacting with various proteins in mammalian cells in a Ca²⁺-dependent manner. Most known ALG-2-interacting proteins contain proline-rich regions in which either PPYPXnYP (type 1 motif) or PXPGF (type 2 motif) is commonly found. Previous X-ray crystal structural analysis of the complex between ALG-2 and an ALIX peptide revealed that the peptide binds to the two hydrophobic pockets. In the present study, we resolved the crystal structure of the complex between ALG-2 and a peptide of Sec31A (outer shell component of coat complex II, COPII; containing the type 2 motif) and found that the peptide binds to the third hydrophobic pocket (Pocket 3). While amino acid substitution of Phe⁸⁵, a Pocket 3 residue, with Ala abrogated the interaction with Sec31A, it did not affect the interaction with ALIX. On the other hand, amino acid substitution of Tyr¹⁸⁰, a Pocket 1 residue, with Ala caused loss of binding to ALIX, but maintained binding to Sec31A. We conclude that ALG-2 recognizes two types of motifs at different hydrophobic surfaces. Furthermore, based on the results of serial mutational analysis of the ALG-2-binding sites in Sec31A, the type 2 motif was newly defined.     

Study on new GMA welding process with duplex current feeding

Gas metal arc welding (GMAW) under pure argon shielding gas atmosphere (pure argon-GMAW) is suitable to obtain a high-strength and high toughness welded joint. However, it is difficult that pure argon-GMA welding is applied practically welding structure because of arc instability. In order to perform stable pure argon-GMA welding, duplex current feeding GMAW (DCF-GMAW) has been developed. The DCF-GMAW consists of primary GMA welding current and secondary welding current by constant-current power resource. DFC-GMAW can feed larger current near wire tip. This effect makes that weld penetration depth is deeper, weld bead shape is improved using DCF-GMAW.     

Negative Pore Air Pressure Generation in Backfill of Retaining Walls During Earthquakes and its Effect on Seismic Earth Pressure

In order to investigate the seismic behavior of conventional type and geosynthetic-reinforced soil retaining walls, 1-g model shaking tests were conducted. Model walls having a height of about 50 cm were placed on a subsoil layer and backfilled with a layer of dense dry Toyoura sand. They were subjected to several steps of horizontal irregular excitations. As a result, generation of negative pore air pressure in the backfill was observed. The maximum amplitude of the negative pore air pressure during each shaking step increased with the base acceleration. Based on analyses of the measured data, it was inferred that such negative pore air pressure was caused by outward wall displacement relative to the backfill and not by dilative behavior of the backfill. It would cause a reduction in the seismic earth pressures exerted from the backfill. This feature suggests an advantage of a rigid full-height facing for reinforced soil walls over the segmental types of facing. A simplified numerical procedure to evaluate earth pressure was applied while considering the effects of the negative pore air pressure, and it could qualitatively simulate the measured behavior in terms of the seismic earth pressure and the angle of failure plane in the backfill.     

Compositional analysis of deasphalted oils from Arabian crude and their hydrocracked products

The deasphalted oil (DAO) and its hydrocracked products were analyzed by gas chromatograph with an atomic emission detector (GC-AED), time-of-flight mass spectra (TOF-MS) and X-ray diffraction (XRD) to evaluate the product quality and reaction progress in addition to the yields of the products. Carbon GC-AED spectra revealed that carbon species distributions in distillate products were almost same regardless of their yields and reaction conditions. No sulfur species were found in gasoline and kerosene, while significant reduction of sulfur contents was found in gas oil (GO) according to the hydrocracking reaction temperature and liquid-volume hourly space velocity (LHSV). Vacuum gas oil (VGO) was also analyzed by GC, but it showed a large lump of low resolution. TOF-MS and XRD results indicated that the resid in the feed was cracked into smaller molecules in the product resid. These comprehensive analyses about feeds and products from various hydrocracking process could offer basic information for optimizing the process in industry.