自适应的三维分形地形重建算法研究*

针对常规三维分形地形重建算法具有的速度慢、插值点分布不均匀、参数设置复杂等缺点,提出自适应的三维分形地形重建算法。该算法根据地形的起伏特征自动确定垂直压缩因子,根据子域面积进行均匀插值。实验结果表明,该方法插值效率更高,所获得的插值曲面更加真实,与常规分形插值相比具有一定的优越性。     

钢绞线（丝）网-聚合砂浆加固混凝土梁的变形计算

钢绞线(丝)网-聚合砂浆加固技术是一项新型加固工艺,具有耐火、耐腐蚀、耐老化等优点.在以往试验研究的基础上,采用换算截面法计算加固梁的等效刚度,推导出加固梁正常使用阶段在集中荷载作用下跨中挠度的计算公式,并通过46根加固梁的80组试验数据对其验证,吻合良好,结果可为实际工程加固设计提供参考,同时也为进一步研究加固梁的力学性能建立理论基础.     

兰州市大气环境质量影响因素多元统计模型研究

有别于其他文献从单方面讨论城市大气环境的成因和影响因素,在统计分析软件SPSS12.0的技术支持下,选择兰州市作为代表,对经济发展、能源消耗等与城市大气环境质量相关的诸多影响因子进行了综合数理统计分析并建立模型.结果表明: 影响兰州市大气环境质量的因素可归纳为两类,第一类主要包含社会经济发展、能源消耗以及空气污染因素;第二类主要包括气象因素.兰州市大气环境质量主要受机动车数量、国内生产总值GDP、GDP增长率、工业总产值和万元工业废气量等因素影响;并给出了概率水平为0.05的情况下的兰州市空气污染综合指数的回归方程.     

Effect of coagulation temperature on structures and properties of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene benzobisoxazole) (DHPBO) fibers during dry-jet wet-spinning process

The effect of coagulation temperature on the morphology, microstructures and mechanical properties of dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) fibers was investigated during dry-jet wet-spinning process, in which the coagulation bath concentration and drawn ratio were kept as 10 wt% of PPA in water and 1.7, respectively. The structures and mechanical properties of the as-spun DHPBO fibers were characterized by FTIR, XRD, SEM, and single fiber tensile testing. The results indicated that in PPA/H₂O coagulation system, when the coagulation temperature was 25°C, highly crystallized DHPBO as-spun fibers possessing fine crystallites, circular and smooth morphology, and excellent mechanical properties could be achieved. Supported by the National Natural Science Foundation of China (Grant No. 50673017), Shanghai Leading Academic Discipline Project (Grant No. B603) and the Program of Introducing Taleuts of Discipline to University of People’s Republic of China (“111” Program) (Grant No. 111-2-04)     

Effect of coagulation temperature on structures and properties of poly(p-phenylene benzobisoxazole) (DHPBO) fibers during dry-jet wet-spinning process

The effect of coagulation temperature on the morphology, microstructures and mechanical properties of dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) fibers was investigated during dry-jet wet- spinning process, in which the coagulation bath concentration and drawn ratio were kept as 10 wt% of PPA in water and 1.7, respectively. The structures and mechanical properties of the as-spun DHPBO fibers were characterized by FTIR, XRD, SEM, and single fiber tensile testing. The results indicated that in PPA/H2...     

Mold deformation in soft UV-nanoimprint lithography

UV-nanoimprint lithography (UV-NIL) using a soft mold is a promising technique with low cost and high throughput for producing the submicron scale large-area patterns. However, the deformations of the soft mold during imprinting process which can cause serious consequences have to be understood for the practical application of the process. This paper investigated the deformation of the soft mold by theoretical analyses, numerical simulations, and experimental studies. We simulated the mold deformation using a simplified model and finite element method. The simulation and the related experimental results agree well with each other. Through the investigation, the mechanism and affected factors of the mold deformation are revealed, and some useful conclusions have been achieved. These results will be valuable in optimizing the imprinting process conditions and mold design for improving the quality of transferred patterns.     

Introduction of fluorin into PBO polymer chains: Toward higher thermal stability and lower dielectric constant

A series of novel fluorinated benzoxazole polymers (6FPBO's) with high thermal stability and low dielectric constant were synthesized by copolymerization of 1,3-diamino-4, 6-dihydroxybenzene dihy-drochloride (DAR), 1,4-benzenedicarboxylic acid (PTA) and various amount of 4'4- (hexafluoroisopro-pylidene) bis (benzoic acid) (BIS-B-AF) in the medium of polyphosphoric acid (PPA). 6FPBO fibers were then obtained via dry-jet wet-spinning technique and characterized by means of Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA), single fiber tensile testing machine and scanning electron microscopy (SEM). FTIR spectrum of 6FPBO fibers indicated that the fluorine groups had been incorporated into PBO molecular chains successfully. TGA curves revealed that 6FPBO fibers possessed high thermal stability just as pure PBO fibers. Moreover, dielectric constant spectrum of 6FPBO exhibited that the polymers had low dielectric constant, especially in the range of high- frequency.     

The effect of hydrogen on the electronic structure of kink in bcc iron

The electronic structures of kinks in the [100](010) and 1/2[111](−110) edge dislocations in bcc iron containing hydrogen are investigated by means of the first-principles DMol method and the discrete variational method. The effects of hydrogen on the kinks are discussed. The results show that hydrogen forms weak bonding states with its neighboring host atoms, and since hydrogen draws charge from its neighboring host atoms, the interactions between most of the host atoms are weakened compared with those of the corresponding atomic pairs in the clean kinks. This indicates that the migration of kink, i.e. the motion of dislocation, is easier in the doping hydrogen kink than in the clean kink, which may be the solid solution softening effect resulting from the impurity hydrogen. Supported by the National Basic Research Program of China (Grant No. 2006CB605102) and Science Foundation of Central South University of Forestry & Technology (Grant No. 06y016)     

基于模糊层次分析法综合评判工会竞赛成绩

为综合评判工会组织的各项竞赛活动的成绩,提出了基于模糊层次分析法的综合评判措施,主要包括竞赛项目权重的确定、竞赛成绩的量化和综合评判等过程.实际应用表明,模糊层次分析法可以最大限度减少主观因素对评价结果的影响,合理地确定各项赛事在工会竞赛活动中的权重,结合竞赛成绩的量化矩阵,使得综合评价结果科学、可信.     

差动放大电路共模干扰抑制能力的研究

电磁流量计输出的流速信号非常微弱,且常叠加共模干扰,经信号调理电路放大后,会导致信噪比很低,甚至淹没有用信号．针对这问题提出了利用前置放大电路有效抑制共模干扰,对其进行定性、定量分析,给出实际可行的提高差动放大电路输入阻抗的设计,并进行分析、推导和对比计算,证明其可以很大限度抑制共模干扰,提高测量准确度．