Removal of chromium (VI) from aqueous solution using treated oil palm fibre

This study proposed an oil palm by-product as a low-cost adsorbent for the removal of hexavalent chromium [Cr (VI)] from aqueous solution. Adsorption of Cr (VI) by sulphuric acid and heat-treated oil palm fibre was conducted using batch tests. The influence of pH, contact time, initial chromium concentration and adsorbent dosage on the removal of Cr (VI) from the solutions was investigated. The optimum initial pH for maximum uptake of Cr (VI) from aqueous solution was found to be 1.5. The removal efficiency was found to correlate with the initial Cr (VI) concentration, adsorbent dosage as well as the contact time between Cr (VI) and the adsorbent. The adsorption kinetics tested with pseudo first order and pseudo second order models yielded high R(2) values from 0.9254 to 0.9870 and from 0.9936 to 0.9998, respectively. The analysis of variance (ANOVA) showed significant difference between the R(2) values of the two models at 99% confidence level. The Freundlich isotherm (R(2)=0.8778) described Cr (VI) adsorption slightly better than the Langmuir isotherm (R(2)=0.8715). Difficulty in desorption of Cr (VI) suggests the suitability of treated oil palm fibre as a single-use adsorbent for Cr (VI) removal from aqueous solution.     

Engineering Iron Oxide Hollow Nanospheres to Enhance Antimicrobial Property: Understanding the Cytotoxic Origin in Organic Rich Environment

Engineered magnetic iron oxide nanoparticles with surprisingly high antimicrobial activity and excellent safety profiles to mammalian cell lines have been developed. Hematite hollow nanospheres (HNSs) are prepared by a facile hard templating method; reduction of hematite HNSs by H₂ leads to magnetite HNSs. The antimicrobial activity of magnetite HNSs towards Gram negative (Escherichia coli) and Gram positive (Staphylococcus epidermidis) bacteria is evaluated against hematite HNSs and conventional magnetite (C‐magnetite; diameter <50 nm). Superior antibacterial performance is observed for magnetite HNSs towards both E. coli and S. epidermidis over hematite HNSs and C‐magnetite. The origin of the antimicrobial activity of magnetite HNSs is the high leaching of iron ions in the presence of microorganisms, which leads to high generation of reactive oxygen species. Magnetite HNSs allow multiple‐fold increase in the generation of soluble iron ions over hematite HNSs and C‐magnetite, showing that control over both the composition and nanostructure is crucial to tune the antimicrobial activity of iron oxides. Based on the current findings, magnetic HNSs show promising potential antimicrobial applications.     

Sensitivity Analysis on Neural Network Algorithm for Primary Superheater Spray Modeling

ABSTRACT

Nonlinear, large inertia with long dead time is always associated with the main steam temperature parameter in coal fired power plant. Successful control of the main steam temperature within ±2°C of its setpoint is the ultimate target for coal-fired power plant operators. Two of the most common main steam temperature circuit are primary superheater spray and secondary superheater spray. Various methods were used to model the primary superheater spray control valve opening, and the neural network remains one of the most popular choices among researchers. It remains inconclusive which neural network algorithm types, setup, number of layers, and training algorithm will give the best result. As such, the paper shows the best setup for the neural network algorithm based on sensitivity analysis methodology for one hidden layer. The inputs selected for the neural network are generator output, main steam flow, total spray flow, and secondary superheater outlet steam temperature, while the output selected is primary spray flow control valve opening.     

Biohydrogen production from Imperata cylindrica bio-oil using non-stoichiometric and thermodynamic model

This paper presents a non-stoichiometric and thermodynamic model for steam reforming of Imperata cylindrica bio-oil for biohydrogen production. Thermodynamic analyses of major bio-oil components such as formic acid, propanoic acid, oleic acid, hexadecanoic acid and octanol produced from fast pyrolysis of I. cylindrica was examined. Sensitivity analyses of the operating conditions; temperature (100–1000 °C), pressure (1–10 atm) and steam to fuel ratio (1–10) were determined. The results showed an increase in biohydrogen yield with increasing temperature although the effect of pressure was negligible. Furthermore, increase in steam to fuel ratio favoured biohydrogen production. Maximum yield of 60 ± 10% at 500–810 °C temperature range and steam to fuel ratio 5–9 was obtained for formic acid, propanoic acid and octanol. The heavier components hexadecanoic and oleic acid maximum hydrogen yield are 40% (740 °C and S/F = 9) and 43% (810 °C and S/F = 8) respectively. However, the effect of pressure on biohydrogen yield at the selected reforming temperatures was negligible. Overall, the results of the study demonstrate that the non-stoichiometry and thermodynamic model can successfully predict biohydrogen yield as well as the composition of gas mixtures from the gasification and steam reforming of bio-oil from biomass resources. This will serve as a useful guide for further experimental works and process development.     

Proton exchange membranes prepared by simultaneous radiation grafting of styrene onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) films. I. Effect of grafting conditions

The simultaneous radiation grafting of styrene onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) (FEP) films was studied at room temperature. The effects of grafting conditions (type of solvent, irradiation dose, dose rate, and monomer concentration) were investigated. The degree of grafting was found to be dependent on the investigated grafting conditions. The dependence of the initial rate of grafting on the dose rate and the monomer concentration was found to be of 0.5 and 1.3 orders, respectively. The results suggest that grafting proceeds by the so‐called front mechanism in which the grafting front starts at the surface of the film and moves internally toward the middle of the film by successive diffusion of styrene through the grafted layers. Some selected properties of the grafted films were evaluated in correlation with the degree of grafting. We found that the grafted FEP films possess good mechanical stability, which encourages their use for the preparation of proton exchange membranes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 220–227, 2000     

Proton exchange membranes prepared by simultaneous radiation grafting of styrene onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) films. II. Properties of sulfonated membranes

Proton exchange membranes were prepared by radiation‐induced grafting of styrene onto commercial poly(tetrafluoroethylene‐co‐hexafluoropropylene) films using a simultaneous irradiation technique followed by a sulfonation reaction. The resulting membranes were characterized by measuring their physicochemical properties such as water uptake, ion exchange capacity, hydration number, and proton conductivity as a function of the degree of grafting. The thermal properties (melting and glass transition temperatures) and thermal stability of the membrane were also investigated using differential scanning calorimetry and thermal gravimetric analysis, respectively. Membranes having degrees of grafting of 16% and above showed proton conductivity of the magnitude of 10⁻² Ω⁻¹ cm⁻¹ at room temperature, as well as thermal stability at up to 290°C under an oxygen atmosphere. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2443–2453, 2000     

Part II. Properties of the grafted and sulfonated membranes

The physical and chemical properties of polystyrene grafted and sulfonated polytetrafluoroethylene (PTFE‐graft‐PSSA) membranes prepared by radiation‐induced grafting of styrene onto commercial PTFE films using simultaneous irradiation technique followed by a sulfonation reaction are evaluated. The investigated properties include water uptake, ion exchange capacity, hydration number and ionic conductivity. All properties are correlated with the amount of grafted polystyrene (degree of grafting). The thermal stability of the membrane evaluated by thermal gravimetric analysis (TGA) is compared with that of original and grafted PTFE films. The membrane surface structural properties are analysed by electron spectroscopy for chemical analysis (ESCA). Membranes having degrees of grafting of 18 % and above show a good combination of physical and chemical properties that allow them to be proposed for use as proton conducting membranes, provided that they have sufficient chemical and mechanical stability. © 2000 Society of Chemical Industry     

Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. I. Preparation and characterization of the graft copolymer

PFA-g-polystyrene graft copolymers were prepared by simultaneous radiation-induced graft copolymerization of styrene onto poly(tetrafluoroethylene-co-perfluorovinyl ether) (PFA) films. The effects of grafting conditions such as monomer concentration, dose, and dose rate were investigated. Three solvents, i.e., methanol, benzene, and dichloromethane, were used as diluents in this grafting system. Of the three solvents employed, dichloromethane was found to greatly enhance the grafting process, and the degree of grafting increased with the increase of monomer concentration until it reached its highest value at a styrene concentration of 60 (vol %). The dependence of the initial rate of grafting on the monomer concentration was found to be of the order of 1.2. The degree of grafting was found to increase with the increase in irradiation dose, while it considerably decreased with the increase in dose rate. The formation of graft copolymers was confirmed by FTIR analysis. The structural investigation by X-ray diffraction (XRD) shows that the degree of crystallinity content of such graft copolymers decreases with the increase in grafting, and consequently, the mechanical properties of the graft copolymers were influenced to some extent. Both tensile strength and elongation percent decreased with the increase in the degree of grafting. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2095–2102, 1999     

Prediction of sand mass and organic matter distribution via in situ measured wet sediment bulk density profile

The objective of the study is to develop a spatial prediction model of sand mass and organic matter distribution in an urban stormwater holding pond using in situ measured wet sediment bulk density profile data to spatially distinguish the most likely contaminated sediment deposit areas. The wet bulk density profiles of deposited sediment at 25 locations in the Berembang (Malaysia) stormwater holding pond were measured using a single-probe nuclear density gauge. The sand and organic matter compositions of the surface sediment sample, 5 cm thickness from the bed surface, were determined. Discriminant analysis (DA) was conducted to generate two Fisher’s linear discriminant functions for the prediction of sand mass and organic matter composition areas, respectively. The linear discriminant functions generated better area classifications of surface organic matter composition compared to the sand mass distribution using wet sediment bulk density data measured at more than 15 cm depth levels.