Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

传爆管用聚奥99炸药研究

介绍了具有高煤轰感度和耐热特性的聚奥99炸药的配方、制备工艺、性能以及装入传爆管后产品的性能和应用状况。     

SL1型翻斗式遥测雨量计的维修和养护

仪器缺少维修及养护直接影响测报工作的完成，以 Ｓ Ｌ１ 型翻斗式遥测雨量计为例，从仪器的结构原理出发，介绍仪器的维修和养护方法，并简单论述仪器维护的重要性，提出一些搞好仪器维护的建议。     

高分子量阴离子型聚丙烯酰胺的制备

介绍了聚丙烯酰胺的品种、性能及用途；研究了以丙烯酸为共聚单体，采用反相乳液聚合制备高分子量阴离子型聚丙烯酰胺胶乳的原理和方法；分析讨论了原料纯度、乳化剂和引发剂种类及操作条件等因素对产品性能的影响．     

On the algebraic formulation of certain geometry statements and mechanical geometry theorem proving

In this paper we analyze the algebraic formulations of certain geometry statements appearing in recent literature related to mechanical geometry theorem proving and give several examples to show that one of these formulations can cause serious problems. We clarify a formulation which is essentially due to W. T. Wu and, in our opinion, is the most satisfactory.This author was supported by NSF Grants DCR-8503498 and CCR-8702108.     

防水粉憎水膜形成机理及稳定性的研究

通过对防水粉憎水膜形成途径的探索，提出了憎水膜形成过程的基本假设，利用微观测试方法证实了憎水膜层的存在．试验并研究了防水粉长期稳定性的诸多问题。     

不同品位高钛渣对沸腾氯化工艺的影响

分别以94％品位高钛渣和90％品位高钛渣为原料，采用沸腾氯化工艺制备粗TiCl4，分析了两种品位高钛渣对沸腾氯化工艺的影响。结果表明：94％品位高钛渣由于其活性低而对沸腾氯化工艺的影响较大。     

水平井现场地质导向方法及其应用

为了降低水平井的钻探工程成本，要尽量不钻或少钻导眼井段。根据水平井在钻前准备、深度预测、稳定井斜、水平导入4个阶段的不同作业特点，依据现场施工经验，归纳提出了利用公式法、小导眼法、曲线指示法、扭矩与dc指数法等方法进行地质导向的成功实践。利用这些方法，可以有效地指导现场钻井人员，将钻井轨迹比较准确地导入目的层中。     

铝电解槽修槽废渣的特性分析及处理

分析了铝电解槽修槽废渣的产生量、基本构成及污染特性，重点介绍了铝电解槽修槽废渣的处理处置方法和综合利用途径。     

新型模具钢012Al在深冷处理过程中的组织转变

本文利用x-射线衍射分析及复型和薄膜透射技术研究了012Al钢经淬火后在深冷处理过程中的组织转变。结果表明,淬火后的残余奥氏体在深冷处理过程中部分转变成马氏体;深冷处理使马氏体发生分解,析出超细碳化物;同时伴有形变晶孪产生。