New pseudo-dynamic analysis of two-layered cohesive-friction soil slope and its numerical validation

Natural slopes consist of non-homogeneous soil profiles with distinct characteristics from slopes made of homogeneous soil. In this study, the limit equilibrium modified pseudo-dynamic method is used to analyze the stability of two-layered c-φ soil slopes in which the failure surface is assumed to be a logarithmic spiral. The zero-stress boundary condition at the ground surface under the seismic loading condition is satisfied. New formulations derived from an analytical method are proposed for the predicting the seismic response in two-layered soil. A detailed parametric study was performed in which various parameters (seismic accelerations, damping, cohesion, and angle of internal friction) were varied. The results of the present method were compared with those in the available literature. The present analytical analysis was also verified against the finite element analysis results.     

Enhancement of properties of recycled coarse aggregate concrete using bacteria

Due to rapid construction, necessity for raw materials of concrete, especially coarse aggregate, tends to increase the danger of early exhaustion of the natural resources. An alternative source of raw materials would perhaps delay the advent of this early exhaustion. Recycled coarse aggregate (RCA) plays a great role as an alternative raw material that can replace the natural coarse aggregate (NCA) for concrete. Previous studies show that the properties of RCA concrete are inferior in quality compared to NCA concrete. This article attempts to study the improvement of properties of RCA concrete with the addition of bacteria named as Bacillus subtilis. The experimental investigation was carried out to evaluate the improvement of the compressive strength, capillary water absorption, and drying shrinkage of RCA concrete incorporating bacteria. The compressive strength of RCA concrete is found to be increased by about 20% when the cell concentration of B. subtilis is 10⁶ cells/ml. The capillary water absorption as well as drying shrinkage of RCA are reduced when bacteria is incorporated. The improvement of RCA concrete is confirmed to be due to the calcium carbonate precipitation as observed from the microstructure studies carried out on it such as EDX, SEM, and XRD.     

Genesis of enhanced photoactivity of CdS/Nix nanocomposites for visible-light-driven splitting of water

A series of CdS/Ni_x nanocomposite photocatalysts, containing ca. 0.6–15 wt% Ni, were synthesized using a one-step hydrothermal method and characterized for their crystallographic, morphological, interfacial, and optical properties. Rietveld refinement of powder XRD data revealed the coexistence of wurtzite (hexagonal) and zinc blende (cubic) phases of CdS in ratios dependent on Ni content. Only a fraction of Ni existed as a secondary phase of NiS while the majority occupied the lattice positions of hexagonal CdS. Whereas up to 10-fold enhancement in H₂ evolution compared with pure CdS was observed for samples containing ∼1.5–4.5 wt% Ni, samples with smaller or larger Ni content displayed poor activity for visible-light-induced splitting of water in presence of sulfide–sulphite ions as sacrificial electron donors. In contrary to recent findings, our study reveals that the enhanced CdS photoactivity is not a result of charge transfer between p-type NiS and n-type CdS, Ni-induced visible-region absorbance, or the coating of CdS particles by non-photoactive NiS. Instead, the preparation-dependent hexagonal/cubic CdS phase boundaries and particle morphology may play a crucial role. Additionally, certain Ni-doping-induced sub-bandgap shallow energy levels contribute to charge carrier separation.     

Elaboration and properties of novel biobased nanocomposites with halloysite nanotubes and thermoplastic polyurethane from dimerized fatty acids

Nanocomposites of biobased thermoplastic polyurethane (TPU) from dimer fatty acids and halloysite nanotubes (HNT) were elaborated by different melt processing routes such as direct mixing (1 step process) and masterbatch/dilution (2 steps process), at different temperatures (150 and 180 °C). Rheological and transmission electron microscopy (TEM) analyses indicated that the HNT distribution and dispersion were dependent on the processing conditions: the 2 steps process produced well dispersed nanocomposites and the masterbatch dilution at 180 °C improved the HNT distribution through the TPU. Consequently, a high reinforcement was achieved, with a 40% increase in the elastic modulus and 8 °C increase in the relaxation temperature related to the glass transition of the TPU soft segments. Furthermore, a percolated network was attained, even if a large extent of HNT breaking was observed during processing, suggesting that a synergistic effect between the HNT particles and the TPU's hard segments in the molten state occurred. Thus, HNT nanotubes can be seen as highly reinforcing nanofillers when good dispersion and distribution are achieved through the polymeric matrix.     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Odds ratio-based group sequential analysis for joint binomial and inverse binomial sampling

We consider two treatment comparison in a clinical trial setup where the responses from one treatment are a priori known for a fixed number of individuals and patients are allocated in a groupsequential way for the other treatment using inverse sampling. We consider the odds ratio as the measure of treatment difference at the end of each group, where for the calculation of odds ratios we consider the full data on one treatment, which are a priori known, and the available data on the other treatment up to that point of time. We have calculated the optimal number of index subjects for inverse sampling and examine the effects of different type I and type II error spending functions on group sequential testing in this context. The methodology is illustrated by using a real data set.     

Frontal cationic curing of epoxy resins in the presence of defoaming or expanding compounds

Thermal frontal polymerization was carried out with trimethylol propane triglycidyl ether using two different BF₃‐amine complexes, B‐950 and B‐110 from Leepoxy, as initiators for cationic polymerization. The amounts of filler (kaolin or fumed silica), defoaming, or expansion agents were varied to study how the compositions affected the front velocity, expansion, and flexural modulus of the resulting epoxy resins. The polymer produced with B‐950 initiator showed higher modulus than the polymers produced with B‐110. Moreover, fumed silica created stronger materials than kaolin. The presence of BYK as a defoamer or an expansion agent such as the Expancel #80 was also able to affect significantly the mechanical properties. differential scanning calorimetry studies indicated that the conversion was complete and that kaolin and silica increased the rate of reaction. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40339.     

Fluid flow stability analysis of multilayer fiber drawing

We here investigate drawing of multi-layered Newtonian and non-Newtonian fluid fibers, drawn under isothermal and non-isothermal conditions. We first develop one-dimensional equations governing mass, momentum, and energy balances and solve them numerically to obtain steady state draw root shape, velocity, and temperature profiles. These solutions are then used to perform linear stability analysis. For the case of isothermal draw, the system displays an oscillatory instability when the draw ratio (ratio of cross-sectional areas of fiber at the entrance and exit of the drawing) is higher than a critical draw ratio (highest stable draw ratio) of about 20.21. Investigation of stability behavior under non-isothermal draw conditions is performed by considering radiative heating and convective cooling. Employing only radiative heating enhances the critical draw ratio, and simultaneous heating and convective cooling increase the critical draw ratio even further. For the case of simultaneous heating and cooling, with increasing convective cooling strength, the critical draw ratio first increases, reaches a maximum, and then gradually decreases. However, with only convective cooling, the critical draw ratio decreases with an increase in convective cooling strength. We also find that the stabilizing effect of a non-isothermal operation can be enhanced by considering fluids with higher viscosity sensitivity to temperature, increasing the maximum temperature, and for sharper attenuation of the fiber cross-sectional area with length. For the case of isothermal drawing of non-Newtonian fluid fibers, the system has a higher critical draw ratio for shear thickening fluids (power-law exponent, n>1). In contrast, the use of a shear thinning fluid (n<1) reduces the critical draw ratio. Consideration of a non-isothermal operation of non-Newtonian fluid fibers reveals that the critical draw ratio is primarily determined by the non-Newtonian behavior rather than the non-isothermal drawing.     

Double emulsion‐encapsulated guggul exhibits improved in vivo hypocholesterolaemic action in rats

Guggul tree or Commiphora mukul is a small thorny herb having remarkable hypocholesterolaemic properties. Its therapeutic effects are because of its biocomponent guggulsterones, especially guggulsterone E and Z. In this research, double emulsion‐based spread was tried to improve the bioavailability of the herb guggul in in vivo rat model. The effect of the different diets with encapsulated and nonencapsulated guggul was evaluated and compared after 6 weeks, based on the final body weight and analysis of organs, serum and faeces of normal and hypercholesterolaemic (H) rats. It was evident from the results that double emulsion‐encapsulated guggul showed better control on weight of H rats (25.98% lower), inhibition of HMG CoA reductase (3.95 times less) activity and reduction in atherosclerotic index (47.2%), as compared to diet with unencapsulated guggul. Encapsulation of guggul also improved faecal excretion of bile acids, lipids and total cholesterol in H and normal rats.     

Amperometric determination of tyramine in sauce and beer by epoxy resin biocomposite membrane bound tyramine oxidase

A method is described for construction of an amperometric biosensor for specific determination of tyramine, using black gram tyramine oxidase immobilized covalently on an epoxy resin membrane. The biosensor had optimum response within 10 s at pH 8.5 and 35 °C. A linear relationship was observed between tyramine concentrations and current (mA) in the range of 0.24 to 3.47 mg/dL. The biosensor was employed for determination of tyramine in beer and sauce. The detection limit of sensor was 0.24 mg/dL. The mean analytical recovery of added tyramine (0.5 and 1.0 mg/dL) was 97.3 ± 2.3 and 95.9 ± 3.4%. Within and between batch coefficient of variation were 5.1 and 5.34%, respectively. Enzyme electrode showed 35% loss in its initial activity after its regular use over a period of 2 months. The biosensor has the advantage that it does not suffer from leaching of enzyme and measures tyramine specifically.