Laser-assisted preparation of C3N4/Fe2O3/Au nanocomposite: a magnetic reusable catalyst for pollutant degradation

Clean Technologies and Environmental Policy - Assorted common contaminants namely organic dyes and nitro compounds are generated by various industries and have caused alarming problems for the...     

A Highly Secured Image Encryption Scheme using Quantum Walk and Chaos

The use of multimedia data sharing has drastically increased in the past few decades due to the revolutionary improvements in communication technologies such as the 4th generation (4G) and 5th generation (5G) etc. Researchers have proposed many image encryption algorithms based on the classical random walk and chaos theory for sharing an image in a secure way. Instead of the classical random walk, this paper proposes the quantum walk to achieve high image security. Classical random walk exhibits randomness due to the stochastic transitions between states, on the other hand, the quantum walk is more random and achieve randomness due to the superposition, and the interference of the wave functions. The proposed image encryption scheme is evaluated using extensive security metrics such as correlation coefficient, entropy, histogram, time complexity, number of pixels change rate and unified average intensity etc. All experimental results validate the proposed scheme, and it is concluded that the proposed scheme is highly secured, lightweight and computationally efficient. In the proposed scheme, the values of the correlation coefficient, entropy, mean square error (MSE), number of pixels change rate (NPCR), unified average change intensity (UACI) and contrast are 0.0069, 7.9970, 40.39, 99.60%, 33.47 and 10.4542 respectively.     

Cell Selection for Load Balancing in Heterogeneous Networks

The vision of advanced long-term evolution (LTE-A) project is set to ultimate increase of network capacity in heterogeneous networks (HetNets). In HetNets with small cell configuration, a considerable majority of user devices is eventually connected to the macrocell base station (MBS), while small base stations (BSs), such as femtocell access points (FAPs), are still without any user. This results in unbalanced load and reduces the data rate of macrocell user equipment (MUE). In this paper, a method is proposed for load balancing among FAPs, while desired throughput is achieved. The proposed method uses the estimated received signal strength from different BSs and adjusted pilot signals. Under the critical signal to interference plus noise ratio (SINR) condition, a list of candidate FAPs is prepared. The updated candidate list henceforth does not include the least visited FAPs, which in turn leads to lower unnecessary handoffs. Once the BS with the highest number of free RBs and the highest pilot signal power is selected, FAP allocates the RBs with higher SINRs (qualified RBs) to user. In the case of FAP unavailability, the algorithm compels users to connect to the MBS with adequate qualified RBs. The performance of the proposed method was evaluated under a variety of FAPs density, and the number and velocity of users in terms of throughput and Jain’s fairness index. The results evidence affordable improvements in the throughput and Jain’s index in comparison with other methods.     

Optimization of centrifugally spun thermoplastic polyurethane nanofibers for air filtration applications

While our knowledge of fiber formation by using conventional nanofiber spinning techniques has increased to a considerable extent, there are still few studies on centrifugal spinning either in academia or in the industry. Centrifugal spinning is a comparatively new method of producing fibers having nano- or microscale diameters. In this study, three main parameters (nozzle orifice diameter, rotational speed, polymer concentration) of centrifugal spinning were optimized to produce air filter media from thermoplastic polyurethane nanofibers. The effect of concentration of polymer solution was found to be a major contributor in TPU fibers optimization estimating 77.5%. After the optimization studies, the average fiber diameter of nanofiber sample produced at optimum conditions (22G needle as an orifice, 4000 rpm, and 10 wt% concentration of polymer solution) was 205 ± 84 nm. Aerosol filtration performance of the produced webs was analyzed. Filtration efficiency of the optimized sample was found to be 99.4% for 0.3 µm particle size at an expense of 98 Pa pressure drop.

Copyright © 2018 American Association for Aerosol Research     

Some geotechnical properties of soils in the Haditha area,W. Iraq

The present study is part of the regional engineering geological survey of the western deserts dealing with soil investigations attempting their classification and evaluation for engineering purposes. Field study has revealed that these soils are mainly of residual origin, partly they are colluvial and alluvial. Laboratory test results show that they composed of both coarse and fine fractions. The coarse-grained are mainly of SM-group, less frequently of SC-group. Fine-grained soils are of both CL-and ML groups in equal significance. These soils are seldom free from soluble salts, particularly sulphates in the form of secondary gypsum, some with a high content. Results are discussed in details. Important engineering properties with suitability for engineering use are also given.     

Numerical analysis of heat transfer due to slot jets impingement onto two cylinders with different diameters

A numerical investigation has been performed two-dimensional slot impingement onto two heated cylinders with different diameters turbulent flow conditions. Height of slot jet is taken as constant for all cases. The study is performed to see the effects of effective parameters on heat and fluid flow as jet Reynolds number (11,000 ≤ Re ≤ 20,000), diameter ratio of cylinders (0.5 ≤ D₁/D₂ ≤ 1.5) and ratio of distance between cylinders to slot jet high (L/S). Streamlines, isotherms, local and mean Nusselt numbers and Cd coefficient were obtained. These results were compared with earlier experimental and numerical works and good agreement was obtained. It is found that diameter ratios of cylinders can be a control element for heat and fluid flow.     

Effect of hydrogen addition using on-board alkaline electrolyser on SI engine emissions and combustion

In this study, an electrolyser was used to supply hydrogen to the SI engine. Firstly, the appropriate operation point for the electrolyser was determined by adjusting the amount of KOH in the electrolyte to 5%, 10%, 20% and 30% by mass, and applying 12 V, 16 V, 20 V, 24 V and 28 V voltages. Tests were first carried out with the gasoline without the use of an electrolyser, followed by operating the electrolyser at the appropriate point and sending obtained H₂ and O₂ to the engine in addition to the gasoline. The SI engine was operated between 2500 rpm and 3500 rpm engine speeds with and without hydrogen addition. Cylinder pressure, the amount of gasoline, H₂ and O₂ consumed by the engine and the emission data were collected from the test system at the aforementioned engine speeds. Furthermore, indicated engine torque, indicated specific energy consumption, specific emissions and HRR values were calculated. According to the results obtained, improvement in ISEC values was observed, and CO and THC values were improved by up to 21.3% and 86.1% respectively. Even though the dramatic increase in NO_x emissions cannot be averted, they can be controlled by equipment such as EGR three-way catalytic converter.     

Determination of industrial pollution effects on citrus honeys with chemometric approach

The aim of this study was to determine the levels of essential, trace and toxic elements, such as K, Ca, Fe, Cu, Al, Ni, Sn, Pb and Cd in citrus honeys from different regions (industrialized and nonindustrialized) of Hatay, Turkey. K, Ca, Na and Mg were the most abundant elements, with mean contents of 363.5, 256.6, 88.1 and 37.7 mg/kg, respectively. The trace element mean contents ranged between 0.032 and 15.58 mg/kg. Significant differences in Fe, Cu, Al, Ni, Sn, Pb, Cd, Co and Sr levels were observed between two different regions. The findings that Fe, Cu, Al, Ni, Sn, Pb, Cd, Co and Sr contents in citrus honeys from industrialized regions were higher than citrus honeys from non-industrialized regions indicate that the honeys were affected by industrial pollution. Chemometric methods were applied to classify honey according to mineral content. Cluster analysis showed three clusters corresponding to the three different regions.