动态固化聚丙烯/马来酸酐接枝三元乙丙橡胶/环氧树脂共混物

将动态固化法成功地应用于聚丙烯／环氧树脂共混体系中，加入马来酸酐接枝三元乙丙橡胶后不仅增加了聚丙烯／环氧树脂共混体系的相容性，而且提高了聚丙烯基质的韧性。固化的环氧树脂颗粒提高了聚丙烯基质的刚性。动态固化聚丙烯／马来酸酐接枝三元乙丙橡胶／环氧树脂共混物的刚性和韧性达到了很好的平衡。     

微乳液法制备纳米二氧化硅及表征

制备Triton X—10/正辛醇/环己烷/水(或氨水)油包水(W/O)型微乳液,讨论了微乳液相关性质与含水量的关系;以正硅酸乙酯(TEOS)为硅源,在制备的微乳液中受控水解制得纳米SiO2粒子,并用FT—IR、TEM、比表面测定进行表征;结果显示含水量和硅源浓度与粒子尺寸相关,TEM照片显示粒径40~80 nm。     

中氮肥煤造气技术改造调查与评述（上）

重点调查了９０年代以来，全国以煤焦为原料的中氮厂造气工序技术改造的基本情况，对技术改造的效果和存在的问题作了全面的评述，为各企业技术改造提供了一份可借鉴和参考的资料     

铵盐体系香波泡沫性能的研究

研究了两种铵盐型阴离子表面活性剂与烷基单乙醇酰胺、烷基二乙醇酰胺等复配体系在不同水硬度条件下的泡沫性能 ;考察了乳化硅油、羊毛脂、十八醇、珠光剂、香精、阳离子表面活性剂及聚合阳离子化合物等添加剂在香波体系中不同水硬度条件下对发泡性能的影响。实验条件下所有体系的稳泡性均较好 ,LSA与AESA复配后泡沫力增大 ,其中AE SA含量需 <1 0 % ;含烷基单乙醇酰胺香波体系的泡沫性能优于含烷基二乙醇酰胺的 ;羊毛脂和乳化硅油对香波泡沫的影响较大 ,而其它添加剂对香波泡沫的影响不大。     

复合材料纤维铺放技术及其应用

本文介绍了复合材料纤维铺放技术的特征和优点，综述其发展历史和世界先进国家在航空航天及其他领域的应用情况，并对我国展纤维铺放技术研究进行了展望。     

A kinetic study on medium temperature desulfurization using a natural manganese ore

Natural manganese ores were selected as raw materials for the desulfurization sorbent because of economical efficiency and high reactivity on hydrogen sulfide. Initial reaction rates between H₂S and desulfurization sorbent of natural manganese ores were determined in a temperature range of 400-800°C using a thermobalance reactor. All reactions were first order with respect to H₂S and were expressed by the Arrhenius relation. When the sulfidation reaction was controlled by diffusion, the temperature dependence of the effective diffusivity was given by the Arrhenius equation. Activation energies and frequency factors were obtained from the product layer diffusion coefficient of various sorbents by plotting as an Arrhenius equation form. Several additives were mixed to improve the sulfidation capacity, and NiO was the best additive.     

施工作业活动许可证制度

通过风险分析的方法,找出高风险工作,应用作业许可证制度加以控制。     

Thermodynamic Calculation of the Zirconia–Calcia System

An optimal thermodynamic data set for the zirconia–calcia system is evaluated by the CALPHAD (CALculation of PHAse Diagrams) method applied to experimental phase diagram and thermodynamic data. The liquid and C _ss (cubic ZrO₂ solid solution) are described by a subregular solution model. Three compounds, CaZr₄O₉, Ca₆Zr₁₉O₄₄, and CaZrO₃, are modeled as stoichiometric compounds. A regular solution model is applied to the other phases. Comparisons between calculated and measured phase diagrams and thermodynamic quantities show that most of experimental information is satisfactorily accounted for by thermodynamic calculations. The calculations also reasonably predict the measured electromotive force concerning the metastable C _ss.     

XH－11型胶粘剂最佳固化工艺的研究

本文对ＸＨ－１１型胶粘剂的固化工艺参数进行了试验研究，确定了主要几个参数值，以达到最佳固化工效果。     

厌氧发酵处理味精废水中氯离子的影响

在3L 的CSTR 型厌氧反应器中研究了味精废水厌氧处理中氯离子毒性的反应。试验证明,已中毒的厌氧过程只要Cl~-浓度降至抑制限以下,厌氧过程就可在15～20d 内恢复,在恢复期间加入新污泥有利于恢复过程。保持足够大的SRT 和污泥浓度对于处理含有毒物的废水很有效。对本研究,SRT 得大于20d,污泥浓度在15～24g/L 左右就可达到较好的处理效率。Cl~-的抑制浓度对污泥浓度分别为24.28g/L,15.18g/L 和6.07g/L 时,Cl~-的抑制浓度分别是7750mg/L,7250mg/L和6300mg/L。此外,本文提出以I=S_(Cl)/X_v~n作为判断Cl~-抑制的指标。当COD 去除率大于80%时,n=0.1519。因此,要使过程的COD 去除率分别大于80%,85%和90%时,I 就得分别小于4.7,4.1和3.6。并且污泥浓度必须大于6.07g/L。