Analysis of a two server-two unit cold standby system with correlated failures and repairs

This paper studies a two (non-identical) unit cold standby system with correlated failures and repairs. The system has two types of server—regular (not perfect) and expert. The regular repairman is always available with the system while the expert repairman is called when it is needed. The joint distributions of failure and repair times are taken to be bivariate exponential (B.V.e.). Important reliability characteristics useful to system managers are obtained.     

Mitochondrial calcium in relaxed and tetanized myocardium

The elemental composition of rat cardiac muscle was determined with electron probe x-ray microanalysis (EPMA) of rapidly frozen papillary muscles and trabeculae incubated with ryanodine (1 microM) in either 1.2 or 10 mM [Ca2+]o-containing solutions, paced at 0.6 Hz or tetanized at 10 Hz. Total mitochondrial calcium increased significantly, by 4.2 mmol/kg dry weight during a 7 s tetanus, only in muscles tetanized in the presence of 10 mM [Ca2+]o when cytoplasmic Ca2+ is 1-4 microM (Backx, P. H., W.-D. Gao, M. D. Azan-Backx, and E. Marban. 1995. The relationship between contractile force and intracellular [Ca2+] in intact rat trabeculae. J. Gen. Physiol. 105:1-19). Comparison of total mitochondrial with free mitochondrial Ca2+ reported in the literature indicates that the total/free ratio is approximately 6000 at physiological or near-physiological levels of total mitochondrial calcium. Increases in free mitochondrial [Ca2+] consistent with regulation of mitochondrial enzymes should be associated with increases in total mitochondrial calcium detectable with EPMA. However, such increases in mitochondrial calcium occur only as the result of prolonged, unphysiological elevations of cytosolic [Ca2+].     

Biomechanical testing sequelae relevant to spinal fusion and instrumentation

The increasing prevalence of spinal disorders and associated treatments has produced a dramatic increase in the number of available devices. The biomechanical evaluation leading to the design, development, and implementation of spinal instrumentation has resulted in a number of in vitro and in vivo testing methods. This article reviews some of the methods and associated results obtained by various evaluation techniques of spinal fusion hardware. Current work and future considerations also are presented.     

Nodal price volatility reduction and reliability enhancement of restructured power systems considering demand–price elasticity

With the development of restructured power systems, the conventional “same for all customers” electricity price is getting replaced by nodal prices. Electricity prices will fluctuate with time and nodes. In restructured power systems, electricity demands will interact mutually with prices. Customers may shift some of their electricity consumption from time slots of high electricity prices to those of low electricity prices if there is a commensurate price incentive. The demand side load shift will influence nodal prices in return. This interaction between demand and price can be depicted using demand–price elasticity. This paper proposes an evaluation technique incorporating the impact of the demand–price elasticity on nodal prices, system reliability and nodal reliabilities of restructured power systems. In this technique, demand and price correlations are represented using the demand–price elasticity matrix which consists of self/cross-elasticity coefficients. Nodal prices are determined using optimal power flow (OPF). The OPF and customer damage functions (CDFs) are combined in the proposed reliability evaluation technique to assess the reliability enhancement of restructured power systems considering demand–price elasticity. The IEEE reliability test system (RTS) is simulated to illustrate the developed techniques. The simulation results show that demand–price elasticity reduces the nodal price volatility and improves both the system reliability and nodal reliabilities of restructured power systems. Demand–price elasticity can therefore be utilized as a possible efficient tool to reduce price volatility and to enhance the reliability of restructured power systems.     

Comprehensive studies on polyethylenimine filled polypropylene and its potential application in carbon dioxide sequestration

Polypropylene (PP) was blended with branched polyethylenimine (PEI) with the aim to prepare blends having CO₂ adsorption property. The CO₂ adsorption properties will be conferred due to the presence of variety of amine functionality in PEI. PEI contains primary, secondary as well as tertiary amine groups. Before testing CO₂ adsorption, PP–PEI blends were characterized using variety of techniques, for example, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, scanning electron microscopy, and polarized light optical microscopy. In this work, we have studied in detail both compatibilized as well as noncompatibilized blends of PP and PEI. The compatibilization was achieved via addition of maleic anhydride grafted PP. Finally, all the compatibilized as well as noncompatibilized blends were studied for CO₂ adsorption. The compatibilized blends showed better thermal, mechanical as well as CO₂ adsorption properties as compared to the noncompatibilized blends. POLYM. ENG. SCI., 59:2092–2102, 2019. © 2019 Society of Plastics Engineers     

Crystallization behavior of iron- and boron-containing nepheline (Na2O·Al2O3·2SiO2) based model high-level nuclear waste glasses

This study focuses on understanding the relationship between iron redox, composition, and heat-treatment atmosphere in nepheline-based model high-level nuclear waste glasses. Glasses in the Na₂O–Al₂O₃–B₂O₃–Fe₂O₃–SiO₂ system with varying Al₂O₃/Fe₂O₃ and Na₂O/Fe₂O₃ ratios have been synthesized by melt-quench technique and studied for their crystallization behavior in different heating atmospheres—air, inert (N₂), and reducing (96%N₂–4%H₂). The compositional dependence of iron redox chemistry in glasses and the impact of heating environment and crystallization on iron coordination in glass-ceramics have been investigated by Mössbauer spectroscopy and vibrating sample magnetometry. While iron coordination in glasses and glass-ceramics changed as a function of glass chemistry, the heating atmosphere during crystallization exhibited minimal effect on iron redox. The change in heating atmosphere did not affect the phase assemblage but did affect the microstructural evolution. While glass-ceramics produced as a result of heat treatment in air and N₂ atmospheres developed a golden/brown colored iron-rich layer on their surface, those produced in a reducing atmosphere did not exhibit any such phenomenon. Furthermore, while this iron-rich layer was observed in glass-ceramics with varying Al₂O₃/Fe₂O₃ ratio, it was absent from glass-ceramics with varying Na₂O/Fe₂O₃ ratio. An explanation of these results has been provided on the basis of kinetics of diffusion of oxygen and network modifiers in the glasses under different thermodynamic conditions. The plausible implications of the formation of iron-rich layer on the surface of glass-ceramics on the chemical durability of high-level nuclear waste glasses have been discussed.     

Assessment of interatomic parameters for the reproduction of borosilicate glass structures via DFT-GIPAW calculations

Borates and borosilicates are potential candidates for the design and development of glass formulations with important industrial and technological applications. A major challenge that retards the pace of development of borate/borosilicate based glasses using predictive modeling is the lack of reliable computational models to predict the structure-property relationships in these glasses over a wide compositional space. A major hindrance in this pursuit has been the complexity of boron-oxygen bonding due to which it has been difficult to develop adequate B–O interatomic potentials. In this article, we have evaluated the performance of three B–O interatomic potential models recently developed by Bauchy et al [J. Non-Cryst. Solids, 2018, 498, 294–304], Du et al [J. Am. Ceram. Soc. https://doi.org/10.1111/jace.16082 ] and Edèn et al [Phys. Chem. Chem. Phys., 2018, 20, 8192–8209] aiming to reproduce the short-to-medium range structures of sodium borosilicate glasses in the system 25 Na₂O x B₂O₃ (75 − x) SiO₂ (x = 0-75 mol%). To evaluate the different force fields, we have computed at the density functional theory level the NMR parameters of ¹¹B, ²³Na, and ²⁹Si of the models generated with the three potentials and the simulated MAS NMR spectra compared with the experimental counterparts. It was observed that the rigid ionic models proposed by Bauchy and Du can both reliably reproduce the partitioning between BO₃ and BO₄ species of the investigated glasses, along with the local environment around sodium in the glass structure. However, they do not accurately reproduce the second coordination sphere of silicon ions and the Si–O–T (T = Si, B) and B-O-T distribution angles in the investigated compositional space which strongly affect the NMR parameters and final spectral shape. On the other hand, the core-shell parameterization model proposed by Edén underestimates the fraction of BO₄ species of the glass with composition 25Na₂O 18.4B₂O₃ 56.6SiO₂ but can accurately reproduce the shape of the ¹¹B and ²⁹Si MAS-NMR spectra of the glasses investigations due to the narrower B–O–T and Si-O-T bond angle distributions. Finally, the effect of the number of boron atoms (also distinguishing the BO₃ and BO₄ units) in the second coordination sphere of the network former cations on the NMR parameters have been evaluated.     

Investigation on material mixing during FSW of AA7475 to AISI304

AA7xxx and AISI304 stainless steel (SS) are employed in promising applications. Al alloy-to-SS dissimilar joining is difficult and challenging. Major challenge in the joining of these alloys is the difficulty in mixing of these materials which possess exotic and widely distant properties. AA7475-T761 is a high strength aluminum alloy which is used in key aircraft components. Maiden AA7475-T761 and AISI304 dissimilar joints were fabricated using friction stir welding. Welding was performed with tool having pin diameter of 4 mm and offset of 1.25 mm on Aluminum side. Tool rotational speed, traverse speed and shoulder diameter were varied in the range of 450–560 rpm, 50–63 mm/min, and 12–14 mm, respectively. Mechanical tests showed that joint formed with 14 mm diameter, 560 rpm and 50 mm/min gave the best joint efficiency of 71% of Al-alloy at 7.31% elongation. The materials mixing issues during processing were analyzed with SEM mircrostructure and fractography. Metallography also revealed that offset is critical to the success of joint as it controlled effective mixing of SS and Al in 15 and 85 vol.%, respectively. SS fragments from thermo-mechanically affected zone of SS were found to be partially sheared forming layer of thickness equal to tool traverse/revolution ratio.