Catalysis Letters - We converted agro-waste Custard Apple Peels (CAP) to ash via thermal treatment, on which Pd(OAc)2 was immobilized easily that produced a low-cost, highly efficient Pd/CAP-ash... 相似文献
A large amount of data and applications need to be shared with various parties and stakeholders in the cloud environment for storage, computation, and data utilization. Since a third party operates the cloud platform, owners cannot fully trust this environment. However, it has become a challenge to ensure privacy preservation when sharing data effectively among different parties. This paper proposes a novel model that partitions data into sensitive and non-sensitive parts, injects the noise into sensitive data, and performs classification tasks using k-anonymization, differential privacy, and machine learning approaches. It allows multiple owners to share their data in the cloud environment for various purposes. The model specifies communication protocol among involved multiple untrusted parties to process owners’ data. The proposed model preserves actual data by providing a robust mechanism. The experiments are performed over Heart Disease, Arrhythmia, Hepatitis, Indian-liver-patient, and Framingham datasets for Support Vector Machine, K-Nearest Neighbor, Random Forest, Naive Bayes, and Artificial Neural Network classifiers to compute the efficiency in terms of accuracy, precision, recall, and F1-score of the proposed model. The achieved results provide high accuracy, precision, recall, and F1-score up to 93.75%, 94.11%, 100%, and 87.99% and improvement up to 16%, 29%, 12%, and 11%, respectively, compared to previous works.
Neural Computing and Applications - Predicting the critical buckling loads of functionally graded material (FGM) plates using an analytical method requires solving complex equations with various... 相似文献
AA7xxx and AISI304 stainless steel (SS) are employed in promising applications. Al alloy-to-SS dissimilar joining is difficult and challenging. Major challenge in the joining of these alloys is the difficulty in mixing of these materials which possess exotic and widely distant properties. AA7475-T761 is a high strength aluminum alloy which is used in key aircraft components. Maiden AA7475-T761 and AISI304 dissimilar joints were fabricated using friction stir welding. Welding was performed with tool having pin diameter of 4 mm and offset of 1.25 mm on Aluminum side. Tool rotational speed, traverse speed and shoulder diameter were varied in the range of 450–560 rpm, 50–63 mm/min, and 12–14 mm, respectively. Mechanical tests showed that joint formed with 14 mm diameter, 560 rpm and 50 mm/min gave the best joint efficiency of 71% of Al-alloy at 7.31% elongation. The materials mixing issues during processing were analyzed with SEM mircrostructure and fractography. Metallography also revealed that offset is critical to the success of joint as it controlled effective mixing of SS and Al in 15 and 85 vol.%, respectively. SS fragments from thermo-mechanically affected zone of SS were found to be partially sheared forming layer of thickness equal to tool traverse/revolution ratio. 相似文献
The microstructural, mechanical, and tribological behaviors of electroplated Ni on Cu conducting substrates have been investigated in this study. The microstructural studies were performed by X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). The results showed that initially (111) with (220), (200) Ni texture components were predominant in the coating, and increasing the current density from 0.1 to 0.5 A/cm2 led to the development of a strong (111) texture. The presence of ultrafine grains coupled with a (111) Ni texture improved the coating microhardness and wear properties significantly. It was shown that with an increase in current density, wear resistance of the coatings improved significantly and the electrical resistivity increased due to the highly populated grain boundaries. 相似文献
Multimedia Tools and Applications - In high speed railways, the intelligent railway safety system is necessary to avoid the accidents due to collision between trains and obstacles on the railway... 相似文献
Bacteria in drinking water systems can grow in bulk water and as biofilms attached to pipe walls, both causing regrowth problems in the distribution system. While studies have focused on evaluating the factors influencing the bacteria in bulk water and in biofilms separately, there is a need for understanding biofilm characteristics relative to the bulk water phase. The current study evaluated the effects of chlorine and residence time on the presence of culturable bacteria in biofilms relative to that in bulk water. The results showed that when no chlorine residual was present in the system, the median ratio of bulk to total bacteria was 0.81, indicating that 81% of the bacteria were present in bulk water, whereas only 19% were present in the biofilm. As chlorine concentration increased to 0.2, 0.5, and 0.7 mg/L, the median percentage of bacteria present in bulk water decreased to 37, 28, and 31, respectively. On the other hand, as the residence times increased to 8.2, 12, 24, and 48h, the median percentage of bacteria present in bulk water increased to 7, 37, 58, and 88, respectively, in the presence of a 0.2mg/L chlorine residual. The common notion that biofilms dominate the distribution system is not true under all conditions. These findings suggest that bulk water bacteria may dominate in portions of a distribution system that have a low chlorine residual. 相似文献