Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning

Hybrid hollow multi-walled carbon nanotubes (MWCNTs)/polyelectrolytes (PE) nanofibers were prepared by a combination of the electrospinning method and layer-by-layer (LbL) technique. The mixed polystyrene (PS)/MWCNTs nanofibers were obtained by electrospinning method, which were employed as templates to self-assembly multilayered polyelectrolytes by LbL technique. Hollow MWCNTs/PE nanofibers were obtained by selectively removed part of the template: PS, which is confirmed by Raman spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM).     

FeBP非晶态合金超细微粒的合成及其对PH3分解的催化作用

用化学还原法合成了FeBP非晶态合金超细微粒，用电感耦合等离子体光谱（ICP）、X射线粉末衍射（XRD）、透射电子显微镜（TEM）和差热分析（DSC）等手段对其进行了物性表征，并用微型催化反应装置考察了其对PH3分解的催化作用，结果表明，非晶态合金FeBP对PH3的分解具有良好的催化作用，能使PH3的分解温度从800℃以上降到500℃左右。490℃时分解率超过90％，540℃时达100％。     

预应力锚索数值模拟研究进展及发展动态

预应力锚索属于隐蔽性工程。对其数值模拟研究的原理与方法作初步剖析,并在此基础上分别对预应力锚索(固)数值模拟在国内外的研究现状和进展进行研究与探讨。旨在总结前人数值模拟成果,分析观察现今数值模拟研究动态,从中获得相关启迪,指导以后的数值模拟研究工作。数值模拟可以综合利用其它各学科的研究成果,对复杂的锚固作用机理等问题作定量化求解分析。     

智能电动机控制器在电收尘通风机上的应用

对智能电动机控制器的情况作了介绍，结合工作实践提出了维护要点和建议，并对该控制器的参数设置进行了说明，这对使用该设备的工业企业有一定的指导意义。     

Vibration cavitation behaviour of selected Ni-Mn-Ga alloys

Vibration cavitation erosion tests were carried out on Ni-Mn-Ga alloys of three different crystal structures: (1) the cubic austenite, (2) the non-modulated tetragonal martensite (T) and (3) the five-layered martensite (5M). All Ni-Mn-Ga alloys exhibited cavitation behaviour characterized by a step-wise curve of mass loss versus test time. This behaviour is correlated to the microstructural nature of the alloys as well as the surface conditions of the pre-test samples. The type and concentration of the defects at the surfaces were critical to the cavitation resistance of the alloys. The best cavitation resistant alloy was of a cubic austenitic structure, followed with the alloy of a tetragonal T-martensite. The largest material loss was found in the alloy with a 5M martensite. All the studied Ni-Mn-Ga alloys had an excellent cavitation resistance compared to that of the reference stainless steel, and they even excelled some NiTi alloys found in literature. This may be due to the superelasticity of the cubic austenite and the twinning of the martensitic phases.     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。     

化学还原法制备纳米铜粉的研究

本文采用KBH4在液相中化学还原CuSO4,并加入KOH和络合剂EDTA ,制得了纳米级的纯净的铜粉 ,通过调整反应物的浓度 ,可以消除Cu2 O等杂质。制备的纳米铜粉还存在一定程度的团聚 ,需试验加入分散剂来改善。     

一种新型陶瓷材料及其耐磨性

对新型Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷的磨粒磨损，冲蚀磨损及其在单颗粒作用下的摩擦磨损行为进行了研究。与ＡＴ３０（７０ｗｔ％Ａｌ２Ｏ３－３０ｗｔ％ＴｉＣ）陶瓷相比，Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷具有更为良好的耐磨性，金属钴的存在提高了基体的韧性，细化了晶粒，其综合力学性能得到了显著提高，ＡＴＣ陶瓷样品耐磨性与其强韧化水平和细致的组织结构有关。     

Dexamethasone perfusion of the labyrinth plus intravenous dexamethasone for Ménière's disease

Recent clinical and laboratory evidence indicates that Meniere's disease is an immune-mediated disease. Dexamethasone perfusion of the inner ear through the round window plus intravenous dexamethasone often will stop the dizzy spells, reduce the fullness and low-frequency tinnitus, and sometimes improve the hearing in patients with Meniere's disease. The dexamethasone must act mostly on the endolymphatic sac and, to a lesser extent, on the stria vascularis and spiral ligament, the known targets of immune response in the inner ear, to reduce the endolymphatic hydrops and restore the fluid dynamics of the endolymph. Despite the good results with streptomycin perfusion, the number of patients with further hearing loss is large, so dexamethasone perfusion with intravenous dexamethasone should be tried first. The initial response to dexamethasone perfusion plus intravenous dexamethasone has been very good, with very little risk of further hearing loss, and it holds great promise for the future.     

红外目标精跟踪方法的研究

本文提出了一种直接把红外前视传感器的输出作为测量值来跟踪红外目标的扩展型卡尔曼滤波跟踪算法。在滤波处理时,设置可变的测量矩阵,其目的在于提高运算速度和抑制噪声干扰。通过具体的实例,对所提跟踪算法的特点和有效性进行了细致的分析。