Impulse Response of a Meteor Burst Communications Channel Determined by Ray-Tracing Techniques

Ray-tracing techniques are used to derive the impulse response at VHF of a meteor burst communications channel. An approach to analyze the effects of multipath arising from wind shear is also presented and is applied to a simplified model of trail distortion. Within the limitations of the models adopted, we have found that a single path with a spread of approximately 0.2 μs adequately describes the channel behavior within roughly half a second from trail formation, and that a multipath structure with several paths and a total multipath spread of approximately 2 μs is typically associated with the channel at later times, when the wind shear substantially affects the trail shape. These results are consistent with experimental findings according to which a meteor trail communications channel is capable of transmitting beyond-the-horizon bursts of television images of broadcast quality typically for a fraction of a second after trail formation.     

Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

A Reliable Stochastic Numerical Analysis for Typhoid Fever Incorporating With Protection Against Infection

In this paper, a reliable stochastic numerical analysis for typhoid fever incorporating with protection against infection has been considered. We have compared the solutions of stochastic and deterministic typhoid fever model. It has been shown that the stochastic typhoid fever model is more realistic as compared to the deterministic typhoid fever model. The effect of threshold number T* hold in stochastic typhoid fever model. The proposed framework of the stochastic non-standard finite difference scheme (SNSFD) preserves all dynamical properties like positivity, bounded-ness and dynamical consistency defined by Mickens, R. E. The stochastic numerical simulation of the model showed that increase in protection leads to low disease prevalence in a population.     

Integrative and multi-disciplinary framework for the 3D rehabilitation of large mandibular defects

The International Journal of Advanced Manufacturing Technology - The restoration of mandibular defects, especially large deformities is regarded as the most challenging surgical procedure owing to...     

Investigation of charge transport mechanism in semiconducting La<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3</Subscript> manganite prepared by sol–gel method

Here in, we report the charge transport mechanism in semiconducting La_0.5Ca_0.5Mn_0.5Fe_0.5O₃ (LCMFO) polycrystalline material synthesized via sol–gel auto combustion route. X-ray diffraction (XRD) analysis confirmed the orthorhombic phase of the prepared material. Temperature dependent resistivity and impedance spectroscopy measurements have been carried out to probe the dielectric and electrical conduction mechanism which revealed a change of Mott variable range to the small polaronic hopping conduction mechanism around 303 K. The complex impedance and modulus spectra undoubtedly showed the contribution of both grain and grain boundary effect on the conduction properties of LCMFO. An equivalent circuit [(R_gbQ_gb) (R_gQ_g)] model has been used to address the electrical parameters associated with the different phases (grains and grain boundaries) having different relaxation times. The values of resistances of two phases obtained after fitting the equivalent circuit in the nyquist plot have been analyzed which confirmed the change of conduction mechanism around 303 K. The resultant change in conduction mechanism is also supported by the conductivity plots.     

Exhaust emission profiling of fatty acid methyl esters and NOx control studies using selective synthetic and natural additives

Clean Technologies and Environmental Policy - The present study was focused on the optimized biodiesel production using Moringa oleifera (M. oleifera) and rice bran oils, characterization, and...     

Heat transfer analysis for particle–fluid suspension thermomagnetohydrodynamic peristaltic flow with Darcy–Forchheimer medium

This theoretical analysis explores the effect of heat and mass transfer on particle–fluid suspension for the Rabinowitsch fluid model with the stiffness and dynamic damping effects through Darcy–Brinkman–Forchheimer porous medium. In this study, we also incorporate slip and transverse magnetic field effects. Using low Reynolds number, to neglect inertial forces and to keep the pressure constant during the flow, channel height is used largely as compared with the ratio of length of the wave. A numerical technique is used to solve flow governing system of differential equations. Particular attention is paid to viscous damping force parameter, stiffness parameter, and rigidity parameter; also, the numerical data for thermal profile, momentum, and concentration distribution are presented graphically. Outcomes are deliberated in detail for different fluid models (thinning, thickening, and viscous models). It is found that velocity profile increases for greater values of viscous damping effect and stiffness and rigidity parameter for shear thinning, but conflicting comportment is showed for thickening nature model. Viscous dissipation effects increases the thermal profile for all cases of fluid models. The scope of the present article is valuable in explaining the blood transport dynamics in small vessels while considering the important wall features with chemical reaction characteristics. The current analysis has extensive applications in biomedical engineering field, that is, peristaltic pumps.     

Simplification of genetic programs: a literature survey

Data Mining and Knowledge Discovery - Genetic programming (GP), a widely used evolutionary computing technique, suffers from bloat—the problem of excessive growth in individuals’ sizes....