PVC/CPE/GF复合材料制备及力学性能

采用玻璃纤维(GF)及氯化聚乙烯(CPE)对聚氯乙烯(PVC)协同增韧改性。研究表明,当共混体系中有一定量的GF时,CPE的加入不仅能够改善共混物的韧性,还能够促进GF在PVC基体中的分散,两者协同增韧。随着CPE加入量的增加,GF分散效果增强,PVC/CPE/GF共混物的硬度呈现先显著增强后缓慢增强的趋势、拉伸强度和断裂伸长率逐渐上升、拉伸弹性模量先升高后下降,增韧效果明显。当经过硅烷偶联剂KH–550处理过的GF的质量一定,CPE用量为配方总质量的15%~20%之间时,通过PVC/CPE/GF共混物样条冲击断面的扫描电子显微镜观察可见,GF在基体中分散均匀,与基体粘结紧密,断面产生了大量有规则的网丝结构,增韧效果最佳。     

BNi—2钎焊条的真空吸铸工艺

研究了ＢＮｉ－２钎焊条真空吸铸原理，并由试验得出：当ＢＮｉ－２合金加热到１５００℃，真空控制阀门开口为φ６ｍｍ以上，真空度５０ｋＰａ，铸型预热温度５００℃，并用φ内２ｍｍ×５００ｍｍ石英管进行真空吸铸时，吸铸高度可达到４０ｃｍ以上。     

电化学扫描探针显微镜在腐蚀电化学研究中的应用

从电化学扫描探针显微镜（ECSPM）的工作原理出发，综述了近几年电化学扫描探针显微镜在腐蚀电化学领域的研究进展，指出电化学扫描探针显微镜在原位，局部腐蚀，腐蚀早期过程等电化学中有重要的应用价值。     

FTTH资源管理的研究与实现

随着PON技术的不断完善发展,FTTH逐渐成为运营商的主推宽带用户接入方案。ONT的数据配置比较’繁琐,且由于PON接入网络的无源性特点,给分光器的管理带来了一定困难。通过ONT的营业系统预配置,预先定义用户归属关系,可以解决ONT的配置问题和分光器的资源管理问题。     

PPT中动画运行与路径无关的方法

介绍了三种将PPT及其素材打包为一个可执行文件的方法．且动画的运行与路径无关。并分析了其优缺点及适用场合。     

基于CMS的企业网站的设计与实现

为了使企业网站能及时更新,具有个性和便于维护管理,提出了使用内容管理系统(CMS)来构建一个基于内容管理的企业级网站的解决方案.介绍了有关内容管理的技术背景和相关理论,论述了运用内容管理的理论和相关技术,采用J2EE技术构建一个基于内容管理的企业级网站系统架构的过程.详细介绍了该网站的主要设计目标以及围绕该目标的具体设计思路,重点介绍了权限管理、文件的上传与下载、新闻管理这3大关键技术模块的设计与实现.     

An indoor localization system in a multiblock workspace

As service robots and other ubiquitous technology have evolved, an increasing need for the autonomous navigation of mobile objects has arisen. In a large number of localization schemes, the absolute-position estimation method, which relies on navigation beacons or landmarks, has been widely used as it has the advantages of being economical and accurate. However, only a few of these schemes have expanded their application to complicated workspaces, or those that have many rooms or blocks. As the navigation of mobile objects in complicated workspaces is vital for ubiquitous technology, multiblock navigation is necessary. This article presents methodologies and techniques for the multiblock navigation of the indoor localization system with active beacon sensors. This new indoor localization system design includes ultrasonic attenuation compensation, dilution-of-precision analysis, and a fault detection and isolation algorithm using redundant measurements. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

利用光闪烁现象进行粉尘排放的监测

粉尘排放监测系统正在各国推广应用,新的方法也不断出现．本文提出一种基于光闪烁现象的粉尘排放监测方法．同光透射法相比,这种新方法具有测量精度高、不怕污染、成本低的特点．实验结果表明,测量系统的输出与粉尘排放的浓度呈线性关系．     

A modified particle swarm optimization via particle visual modeling analysis

A particle is treated as a whole individual in all researches on particle swarm optimization (PSO) currently, these are not concerned with the information of every particle’s dimensional vector. A visual modeling method describing particle’s dimensional vector behavior is presented in this paper. Based on the analysis of visual modeling, the reason for premature convergence and diversity loss in PSO is explained, and a new modified algorithm is proposed to ensure the rational flight of every particle’s dimensional component. Meanwhile, two parameters of particle-distribution-degree and particle-dimension-distance are introduced into the proposed algorithm in order to avoid premature convergence. Simulation results of the new PSO algorithm show that it has a better ability of finding the global optimum, and still keeps a rapid convergence as with the standard PSO.     

啤酒糖化过程微机自控系统

针对啤酒糖化过程工艺控制水平的重要性,介绍了微机自动控制系统的结构、功能、控制关键及系统运行效果。