Optimal design of an integrated renewable-storage energy system in a mixed-use building

The rise of mixed-use buildings contributes to the sustainable development of cities but are still met with challenges in energy management due to the lack of energy efficiency and sustainability guidelines. The use of integrated renewable-storage energy systems is a more beneficial solution to this problem over individual solutions; however, most design studies only focused on single-type buildings. Thus, this study aims to optimally design an integrated energy system for mixed-use buildings using HOMER Grid. The objective is to minimize the net present costs, subject to capacity limits, energy balances, and operational constraints. Economic metrics were used to evaluate and compare the proposed system to the varying design cases such as business-as-usual, stand-alone renewable source, and stand-alone energy storage. The case study considered a mixed-use building in a tropical area, with a solar photovoltaic system as the renewable energy source and lithium-ion battery as the energy storage system technology. The results show that the integrated system is the most financially attractive design case. It has a levelized cost of electricity of 0.1384 US$ kWh⁻¹, which is significantly less than the 0.2580 US$ kWh⁻¹ baseline. The system also provides electricity cost savings of 294 698 US$ y⁻¹, excess electricity of 35 746 kWh, and carbon emission reduction of 550 tons annually for a mixed-use building with daily average consumption of 4557-kWh and 763-kW peak demand.     

A fuzzy analytic hierarchy process for the site selection of the Philippine algal industry

Clean Technologies and Environmental Policy - The Philippine algae industry is a multi-billion dollar industry that requires restructuring to further gain global market share. Through the...     

Performance comparison of multiple product kanban control systems

Kanban control systems have been around for decades and have been used to control work-in-process of manufacturing systems. Lately many variations of the basic control system have been developed; however, much of the work in the development and comparison of control systems has focused on a single-stage manufacturing system producing a single product type. In this research, we present procedures for optimising multiple product kanban control systems, namely Base Stock, Traditional Kanban Control System and Extended Kanban Control System (both dedicated and shared type). We then conduct a detailed simulation study to compare the performance of the systems using a common total cost measure. Numerical results show that the dedicated and shared-extended kanban control systems outperform the other two systems. The study also shows that in spite of their different schematics and contrary to conventional wisdom, the performance of dedicated and shared-extended kanban control systems doesn’t differ much.     

Extended hydrophobicity and self-cleaning performance of waterborne PDMS/TiO<Subscript>2</Subscript> nanocomposite coatings under accelerated laboratory and outdoor exposure testing

It has been shown that incorporation of TiO₂ nanoparticles into hydrophobic coatings can show self-cleaning performance. Accelerated laboratory testing indicated that the coats retain their hydrophobic nature for an extended time period. In this paper, hydrophobic polydimethylsiloxane (PDMS)/TiO₂ nanocomposite coatings with a TiO₂ content of 0–40% were fabricated by simple blending of a PDMS dispersion with an aqueous TiO₂ nanoparticle dispersion. Their long-term hydrophobicity and self-cleaning performance were investigated both in laboratory and real-world outdoor testing. As expected, TiO₂ nanoparticle-based coatings exhibited better self-cleaning relative to the TiO₂-free PDMS control coating as measured by methylene blue degradation testing. Excellent long-term hydrophobicity was observed in accelerated weathering testing when they contained the appropriate levels of TiO₂ nanoparticles (i.e., 0–30%). However, the same PDMS/TiO₂ coatings did not show self-cleaning performance, and instead, exhibited improved dirt pickup resistance, in outdoor exposure testing. Sustained hydrophobicity was observed in outdoor exposure testing for the clear films except when TiO₂ levels were at 40%. The hysteresis of water contact angle (HWCA) significantly increased for the PDMS control coating, and water beading was lost as the film surface picked up dirt. In contrast, the TiO₂-based coatings with appropriate TiO₂ levels maintained a relatively low HWCA after outdoor exposure and no water sheeting on rainy days was observed. This result demonstrates that while photocatalytic TiO₂ nanoparticles can maintain coating hydrophobicity upon outdoor exposure, long-term self-cleaning performance in polluted environments has not yet been achieved with this type of coating under real-world conditions.     

FixMyStreet Brussels: Socio-Demographic Inequality in Crowdsourced Civic Participation

FixMyStreet (FMS) is a web-based civic participation platform that allows inhabitants to report environmental defects like potholes and damaged pavements to the government. In this paper, we examine the use of FMS in Brussels, the capital city of Belgium. Analyzing a total of 30,041 reports since its inception in 2013, we demonstrate how civic participation on FMS varies between the ethnically diverse districts in Brussels. We compare FMS use to a range of sociodemographic indicators derived from official city statistics as well as geotagged social media data from Twitter. Our statistical analysis revealed several significant differences between the districts that suggested that crowdsourced civic participation platforms tend to marginalize low-income and ethnically diverse communities. In this respect, our findings provide timely evidence to inform the design of more inclusive crowdsourced, civic participation platforms in the future.     

Validation of luminescent source reconstruction using single-view spectrally resolved bioluminescence images

We characterize the capabilities and limitations of the Living Image Software 3D Analysis package (Xenogen, Alameda, California) in the reconstruction of calibrated light sources. Sources shallower than the mean free path of light propagation suffered reconstruction inaccuracy. For sources deeper than the mean free path, the average error in depth and intensity reconstruction was less than 4% and 12%, respectively, for homogeneous tissue. The reconstruction of luminescent beads implanted within an optically heterogeneous mouse abdomen proved less accurate. The ability to distinguish multiple sources decreased with increasing source depth. A number of factors influence the accuracy of light source reconstruction.     

Mechanical characterization of cellulosic thecal plates in dinoflagellates by nanoindentation

Dinoflagellates constitute an important group of microorganisms. Symbiotic dinoflagellates are responsible for the primary production of coral reef ecosystems and the phenomenon of their demise is known as "coral bleaching." Blooming of the planktonic dinoflagellates is the major cause of "red tides." Many dinoflagellates have prominent membrane-bound thecal plates at their cell cortices. These thecal plates have high cellulose content and are biologically fabricated into various shapes. However, the mechanical properties of theca have not previously been characterized; understanding these properties, including hardness and elastic modulus, will give insights into the ecological significance and biotechnological potential of bio-fabricated structures. A series of nanoindentation tests were performed on various locations of cellulosic thecal plates isolated from the dinoflagellates Alexandrium catenella and Lingulodinium polyedrum. Despite having transparent properties, thecal plates possess mechanical properties comparable to softwood cell walls, implicating their role as a protective cell covering. Consistent measurements were obtained when indentation was performed at various locations, which contrasts with the high variability of cellulose microfibers from plant sources. The present study demonstrated the novel properties of this potential new source of cellulose.