铝合金挤压铸造用电磁泵定量浇注技术

为了开发研制铝合金挤压铸造用电磁泵定量浇注控制系统,应用试验研究和数学分析的方法,建立了电磁泵流量计算的数学模型,开发了电磁泵定量浇注控制程序.结果表明,电磁泵定量浇注挤压铸件质量精度达到2%.该项技术在铝合金挤压铸造中的应用能有效提高铸件的品质和质量精度,提高材料的利用率和铸件生产率.     

High-temperature oxidation of aluminum electroplated Fe-Mn alloys

Austenitic Mn-Al alloys (20–32 W/O Mn, 7–10 Al, 2–3 Si, 1C) were found to have satisfactory oxidation resistance up to 950°C under isothermal conditions in air. Surface enrichment of aluminum is a necessary condition for obtaining an almost pure alumina scale for uses at higher temperatures. Four different Mn-steels were Al-coated by the Capuano electroplating process. In all the steels there was an increase in the hot-oxidation resistance. The best results were obtained with steels containing both Al and Si, and this for temperatures up to 1100°C. No spalling was noticed during rapid cooling of the test pieces. Silicon was found to act as a diffusion barrier to outward iron diffusion. It appears that there is formation of a pure, thin film of alumina from the matrix which interacts with the aluminum diffusing from the superimposed, coating for the formation of good bonds.     

萘降解菌的筛选及降解性能的初步研究

微生物降解是多环芳烃从土壤和水环境中消失的主要途径。本文从加油站废油排放口附近被污染土壤中筛选到两种降解萘的混合菌H1、H2并从中分离出一株纯菌C_1。研究发现,利用纯无机盐培养基加萘作为唯一碳源要比加入其它营养物质的培养基对于筛选萘降解菌更为有利。H_1、H_2和C_1均能以萘为唯一碳源生长,在萘初始浓度为1000mg/L的纯无机盐培养基中培养40h后,培养液中微生物数量分别增长10倍以上,利用气相色谱测得萘的降解率都达到99．6％以上。     

上下向流BAF处理化肥厂工业废水的中试研究

同时运行两套60L/h的曝气生物滤池(BAF)中试装置处理化肥厂工业废水.数据表明上向流工艺比下向流工艺有更好的COD和氨氮去除率.当COD负荷在3.49kg/(m3·d)时,上向流出水COD为45mg/L,去除率为89.5%;当氨氮负荷为0.4kg/(m3·d)时,上向流出水的氨氮为8mg/L,达到了循环冷却水回用指标.而相应的下向流出水COD和氨氮分别为123mg/L和15mg/L.     

Effect of the matrix crystallinity on the percolation threshold and dielectric behavior in percolative composites

Through the use of polyethylenes with different crystallinities as matrices, the effects of the matrix crystallinity on the percolation threshold and dielectric behavior of percolative composites have been investigated. The results suggest that the percolation threshold is negatively related to the matrix crystallinity, whereas the enhancement of the dielectric constant is positively related to the matrix crystallinity. A two‐dimensional diagram is proposed to illustrate such relationships. In addition, it has been found that the insulator–conductor transition is much flatter in low‐crystallinity‐matrix‐based composites, and this may be favorable for preparing threshold composites with a high dielectric constant and a low loss tangent. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

从"特富龙事件"再议绿色化学在高等教育中的重要性

高等院校是国家培养人才的重要场所,为保证新世纪我国经济的可持续发展,本文就"特富龙事件"分析了在高等教育中实施绿色化学教育的必要性,并提出了实施绿色化学教育的具体建议.     

异佛尔酮二异氰酸酯三聚体的合成

合成了3－异氰酸酯基亚甲基－3，3，5－三甲基环己基二异氰酸酯（IPDI）三聚体，对合成中催化剂，反应温度、反应时间等进行了探讨，并用红外光谱进行了表征。结果表明，采用醋酸钾化催化剂，在50－90℃下反应，再经脱催化剂处理，可制得IPDI三聚体。     

碳黑水分离技术的研究

脱油沥青作为谢尔气化工艺的气化原料生产化肥在国内尚属首次,由于沥青原料中的灰分和重金属比渣油原料大得多,若仍采用石脑油萃取碳黑技术,灰分和重金属随碳黑返回气化装置,将造成设备的堵塞、磨损,无法保证设备安稳长期运行.通过对碳黑水分离技术进行多方面的研究,寻找到适宜的工艺路线与解决方案.     

林可霉素生产废水处理站的改造

对某林可霉素生产废水处理站进行了改造.为提高废水的可生化性,增设了水解调节池,好氧生化工艺改为AB法;对于废水中难于生物降解的有机物,采用Fenton氧化法处理,药剂投加量以出水水质达标为目标.处理站改造的工程投资为96.0万元,改造后的运行成本为3.36元/m3.