Evaluation of TEM samples of an Mg-Al alloy prepared using FIB milling at the operating voltages of 10 kV and 40 kV

Transmission electron microscopy (TEM) samples of an Mg-Al alloy has been prepared using a Ga-focused ion beam (FIB) milling at two different operating voltages of 10 kV and 40 kV to investigate the influence of the FIB energy on the sample quality. The fine structures of the samples have been studied using a high resolution TEM, and the concentration of the implanted Ga was analysed using an energy dispersive X-ray (EDX) analysis. The result of the TEM observation revealed that point defects were introduced to the sample finally milled at 40 kV but not at 10 kV. However, crystal lattice images and electron diffraction patterns were clearly observed on both the samples. The typical influence of the FIB energy was indicated in the elemental analysis. The relative Ga concentration in the thin sample finally milled at 10 kV was 1.0-2.0 at% that is less than half of 4.0-6.0 at% of the Ga concentration in the sample finally milled at 40 kV. A comparison between the experimental results of the Ga concentration measurement with simulation was also discussed.     

Volatilization and recovery of mercury from mercury wastewater produced in the course of laboratory work using Acidithiobacillus ferrooxidans SUG 2-2 cells

The iron-oxidizing bacterium Acidithiobacillus ferrooxidans SUG 2-2 is markedly resistant to mercuric chloride and can volatilize mercury (Hg0) from mercuric ion (Hg2+) under acidic conditions. To develop a microbial technique to volatilize and recover mercury from acidic and organic compound-containing mercury wastewater, which is usually produced in the course of everyday laboratory work in Okayama University, the effects of organic and inorganic chemicals on the mercury volatilization activity of A. ferrooxidans cells were studied. Among 55 chemicals tested, the mercury volatilization from a reaction mixture (pH 2.5) containing resting cells of SUG 2-2 (1 mg of protein) and mercury chloride (14 nmol) was strongly inhibited by AgNO3 (0.05 mM), K2CrO7 (1.0 mM), cysteine (1.0 mM), trichloroethylene (1 microM), and commercially produced detergents (0.05%). However, the strong inhibition by trichloroethylene and detergents was not observed when these organic compounds were chemically decomposed using Fenton's method before the treatment of the wastewater with SUG 2-2 cells. When 20 ml of water acidified with sulfuric acid (pH 2.5) containing ferrous sulfate (3%), diluted mercury wastewater (17.5 nmol of Hg2+) and SUG 2-2 cells (0.05 mg of protein) were incubated for 10 d at 30 degrees C, 47% of the total mercury in the wastewater was volatilized and recovered into a trapping reagent for metal mercury. However, when the organic compounds in the mercury wastewater were decomposed using Fenton's method and then treated with A. ferrooxidans cells, approximately 100% of the total mercury in the wastewater was volatilized and recovered.     

Optical topography: practical problems and new applications

We will briefly review the present status of optical topography and then discuss the method of improving practicality, i.e., the signal-to-noise (S/N) ratio and the spatial resolution in observations of higher-order brain functions. The optimum wavelength pair improved the S/N ratio sixfold for deoxyhemoglobin, and new configurations of light irradiation and detection positions doubled the spatial resolution. We also report on developing application fields of optical topography. This modality will bridge the gap between natural sciences, neuroscience, and pedagogy, and show actual real-time brain activity.     

Profile structure of magnetic flux lines in type-II superconductor from a rectangular electron hologram

Profile magnetic configuration of a quantized flux line and flux-line lattice penetrating a type-II superconductor thin foil, niobium, was observed by electron holography and Lorentz microscopy using a 300 kV field-emission electron microscope. Each single flux line was distributed periodically as lattice structure in the mixed state just below its critical temperature of 8.5 K, while at low temperature of 5 K the flux lines were weakly bound as bundles. In order to observe the flux-line distribution over a wide area, discrete Fourier transform reconstruction in the holography was extended for a rectangular area without loss of information and data precision.     

Usefulness of Permanent Power Fuse in Control Centers with Molded Case Circuit Breakers

The increase in electric power consumption in industry has led to the development of modern distribution systems such as control centers having high kVA ratings and high prospective fault current. In such a situation, the improvement of the system usefulness such as reliability and cost effectiveness is the essential requirement. An index is presented to evaluate the system usefulness using the cost effectiveness for fault protection in a system of given bank kVA. The index is estimated on four different system structures of control centers, including one which utilizes Permanent Power Fuses (PPF). It is presented that the PPF combined with molded case circuit breaker in main circuit effectively improves the cost effectiveness in control centers with high fault current. Operating principles of the PPF and the control center utilizing the PPF are briefly outlined.     

Selection of manipulator system for multiple-goal task by evaluating task completion time and cost with computational time constraints

The focus of this study is on the problem of manipulator system selection for a multiple-goal task by evaluating task completion time and cost with computational time constraints. An approach integrating system selection, structural configuration design, layout design, motion planning, and relative cost calculation is proposed to solve this problem within a reasonable computational time. In the proposed approach, multiple-objective particle swarm optimization (MOPSO) is utilized to search for the appropriate manipulator system with appropriate structural configuration from a set of candidate systems. Particle swarm optimization (PSO) and the nearest neighborhood algorithm are employed in layout design and motion planning due to their high convergence speed. Three methods involving a random search algorithm are compared to the proposed approach through a simulation. The simulation is done with a set of tasks and the result shows the effectiveness of the proposed approach.     

Web Caching Replacement Algorithm Based on Web Usage Data

Web caching is one of the fundamental techniques for reducing bandwidth usage and download time while browsing the World Wide Web. In this research, we provide an improvement in web caching by combining the result of web usage mining with traditional web caching techniques. Web cache replacement policy is used to select which object should be removed from the cache when the cache is full and which new object should be put into the cache. There are several attributes used for selecting the object to be removed, such as the size of the object, the number of times the object was used, and the time when the object was added into the cache. However, the flaw in these previous approaches is that each object is treated separately without considering the relation among those objects. We have developed a system that can record users’ browsing behavior at the resources level. By using information gathered from this system, we can improve web cache replacement policy so that the number of cache hits will increase, resulting in a faster web browsing experience and less data bandwidth, especially at lower cache storage environments such as on smart phones.     

Estimating forest canopy density of tropical mixed deciduous vegetation using Landsat data: a comparison of three classification approaches

Although a number of image classification approaches are available to estimate forest canopy density (FCD) using satellite data, assessment of their relative performances with tropical mixed deciduous vegetation is lacking. This study compared three image classification approaches – maximum likelihood classification (MLC), multiple linear regression (MLR) and FCD Mapper – in estimating the FCD of mixed deciduous forest in Myanmar. The application of MLC and MLR was based on spectral reflectance of vegetation, whereas FCD Mapper was operated on integrating the biophysical indices derived from the reflectance of the vegetation. The FCD was classified into four categories: closed canopy forest (CCF; FCD ≥ 70%), medium canopy forest (MCF; 40% ≥ FCD < 70%), open canopy forest (OCF; 10% ≥ FCD < 40%) and non-forest (NF; FCD < 10%). In the three classification approaches, producer's and user's accuracies were higher for more homogeneous vegetation such as NF and CCF than for heterogeneous vegetation density (VD) such as OCF and MCF. FCD Mapper produced the best overall accuracy and kappa coefficient. This study revealed that only spectral reflectance is not enough to get good results in estimating FCD in tropical mixed deciduous vegetation. This study indicates that FCD Mapper, an inexpensive approach because it requires only validation data and thus saves time, can be applied to monitor tropical mixed deciduous vegetation over time at lower cost than alternative methods.     

Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.