The development of bi-based high-temperature superconductor and coil

Ag-sheathed Bi-2223 superconducting oxide conductors with a critical current density of 66,000 A/cm² at 77 K and coils that have generated magnetic fields of approximately 1.5 Tesla at 4.2 K have been successfully developed. The conductors consist of piled-up bundles of four to six sheets of element tapes with transport currents of approximately 200 Amps. The core size limit (CSL) prevented the production of single conductors that had the capacity to transport a current as high as 200 Amps at 4.2 K. Until now, it was difficult to develop a conductor having both high critical current density and the capability of transporting a large amount of current simultaneously. The role of CSL in large scale applications of high temperature superconducting oxides is discussed.     

Enhancement in thermoelectric power factor of M/T/N and M/Bi/M/Bi/M (M and N = Cu or Ni) composite devices welded with T = Bi or Bi<Subscript>0.88</Subscript>Sb<Subscript>0.12</Subscript> alloy

The resultant thermoelectric power factors P of M/T/N and M/Bi/M/Bi/M (M and N = Cu or Ni) devices welded with T = Bi or Bi_0.88Sb_0.12 alloy were measured at 298 K and compared with P values calculated as a function of x by treating these devices as an electrical and thermal circuit, where x is the ratio of thickness of Bi or Bi-Sb alloy to the interval between two thermocouples. Consequently, the Seebeck coefficients of M/T/N devices were enhanced significantly in the middle range from x = 0.3 to 0.8, and the observed P values have a local maximum at small x below x = 0.35. The x-dependence of P values of M/T/N devices was found to be explained well by the simple model proposed here when an enhancement factor in and some reduction in thermal conductivity of pure metal were taken into the calculation. As a whole, however, the observed P values of double-layered M/Bi/M/Bi/M devices are lower than those of single-layered M/Bi/M, so that the macroscopic multi-layering of thermoelectric materials has no effect on the enhancement in P. The maximum P (= 22.1 mW/K²m) of Cu/Bi-Sb/Cu is 1.5 times larger than that of Cu/Bi/Cu and reached 3.6 times as large as the mean value of 5.7 and 6.6 mW/K²m of the high-performance bulk p- and n-type bismuth-telluride compounds.     

Neuronal pathways for activation of inhibitory interneurons in pyriform cortex of the rabbit

The neuronal pathways responsible for the fast inhibitory postsynaptic potentials (IPSPs) elicited in principal cells in the pyriform cortex (PC) by volleys from the olfactory bulb (OB), the lateral olfactory tract (LOT), the anterior commissure (AC), and the deep-lying structures of the PC (DPC) were studied in the rabbit. The central latencies of the fast IPSPs (measured from the onset of the monosynaptic excitatory postsynaptic potential (EPSP) elicited by volleys through the LOT) ranged between 3.0 and 9.3 ms (5.5 +/- 1.3 (SD) ms; n = 54) in the case of OB shocks and between 4.5 and 6.5 ms (5.1 +/- 0.7 (SD) ms; n = 7) in the case of LOT shocks. The onset latencies of the fast IPSPs were between 2.5 and 11.8 ms (5.1 +/- 1.8 (SD) ms; n = 66) in the case of DPC shocks and between 3.5 and 10.1 ms (5.8 +/- 1.5 (SD) ms; n = 61) in the case of AC shocks. The conditioning OB or LOT shocks almost completely eliminated the LOT-evoked fast IPSP when the testing shock was applied at the peak period of the conditioning slow IPSP. The conditioning OB shocks also eliminated the initial part of the OB-evoked fast IPSP, leaving the later part of the fast IPSP almost unchanged. Thus, the onset latency of the OB-evoked fast IPSP was lengthened by 7.1 +/- 2.9 (SD) ms (n = 35) by the conditioning OB shock. The conditioning OB or DPC shocks left the peak amplitude of the DPC-evoked fast IPSP almost unaffected. Similarly, the conditioning OB or AC shocks left the peak amplitude of the AC-evoked fast IPSP almost unaffected. The conditioning OB, DPC, or AC shocks had only a slight influence on the onset latency of the DPC- or AC-evoked fast IPSPs. Rhythmical steps at intervals of 3-5 ms were observed in the rising phase of the OB-evoked fast IPSP. This was interpreted as a result of a repetitive impingement of interneuronal discharges on the impaled cells. Spatial facilitation was observed among the fast IPSPs evoked by volleys from the OB, DPC, and AC when shocks were applied at suitable intervals. A slight facilitation was also seen between the LOT-evoked fast IPSP and the DPC- or AC-evoked fast IPSP. These results were interpreted as a result of the convergence of excitatory synaptic inputs onto the presumed inhibitory interneurons from the four structures of the brain. A temporal facilitation of the fast IPSPs was observed when the OB, DPC, or AC shocks were applied repetitively at short intervals. This suggests a temporal facilitation of the spike discharges of the presumed inhibitory interneurons under similar conditions. From these results, criteria were determined for identifying the inhibitory interneurons.     

Permeability of poly-L-methionine membrane and its oxidized membrane to water vapor

The permeability of poly-L -methionine (PLM) membrane and its oxidized form to water vapor was studied. Permeability coefficients of the PLM membrane were large, of the order of 10^?7 cm³ (S.T.P.)·cm/cm²·sec·cm Hg. The sorption and permeation behavior of the PLM membrane was hydrophobic. The oxidized membrane was prepared by treating one or both sides of the PLM membrane with an aqueous solution of hydrogen peroxide. The membrane oxidized from one side is probably not layered but has a gradient of composition from one surface to the other. The amounts of water sorbed by the modified membrane increased with increase in oxidation time. The permeability coefficients of water vapor through the modified membrane were of the order of 10^?6 cm³ (S.T.P.)·cm/cm²·sec·cm Hg.     

A case of chronic lung abscess showing a cloudy shadow of the right upper lobe, diagnosed by transbronchial aspiration cytology

A 58-year-old healthy woman was admitted to our hospital on 8th October, 1991 for detailed investigation of an abnormal shadow on chest roentgenogram, which was detected by mass survey. The chest roentgenogram showed a cloudy shadow of the right upper lobe, and retrospectively, this abnormal shadow had been present since 1986. Flexible fiberoptic bronchoscopy showed complete obstruction of right B1b bronchus by regenerated bronchial mucosa. Aseptic pus was detected in the obstructed bronchus by means of transbronchial aspiration cytology (TBAC) and chronic lung abscess was diagnosed. The chest roentgenograms of this case is very unusual, and we were unable to find a similar case of chronic lung abscess diagnosed by means of TBAC.     

Formation of radioactive cesium microparticles originating from the Fukushima Daiichi Nuclear Power Plant accident: characteristics and perspectives

ABSTRACT

Following identification of radioactive Cs microparticles (CsMPs) in aerosol samples from the Fukushima Daiichi Nuclear Power Plant (FDNPP), numerous reports on CsMPs have been published. This paper reviews recent progress in the measurement and characterization of CsMPs by advanced analytical techniques, including advanced transmission electron microscopy (TEM) and synchrotron X-ray analysis. These analyses revealed that the CsMPs contained Si, Fe, Zn, Cs, and minor quantities of U together with some fission products. Uranium in the CsMPs was identified as being in the form of uraninite and (U,Zr)O₂. Detailed advanced TEM analysis has clarified some of the processes resulting in the alteration of constituents of the nuclear fuels and containment vessel materials during this severe accident. In addition, a detailed report on the elemental compositions and structures of the fuel debris fragments collected inside and outside of the primary containment vessel²⁵ highlighted the fact that the fuel debris fragments contained nanoparticles with the U and Zr components having similar structures to that of the CsMPs. This similarity in structures has stimulated further research on the structure and elemental constituents, especially for U and Zr in the CsMPs, and has opened up new avenues for studying the chemical characteristics of the fuel debris.     

Determination of various constituent elements of polyethylene terephthalate bottles used for beverages in Japan

Polyethylene terephthalate (PET) bottles are some of the most commonly used containers for beverages. During the manufacturing process of PET resin in Japan, metallic catalysts such as Sb and Ge are widely used, with other metals or metallic compounds also being employed to improve the quality of PET bottles. However, few reports into the contents of such elements exist. Thus, we herein report the concentrations of 34 elements (ie, Li, B, Na, Mg, Al, P, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Rb, Sr, Zr, Mo, Ag, Cd, Sn, Sb, Cs, Ba, W, Pb, and U) in 16 samples of unused virgin PET bottles for beverages. The measurement was performed by inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS), and these bottles were found to contain five main elements (ie, <0.5- to 50-mg/kg Ge, <1- to 26-mg/kg Ti, <0.1- to 279-mg/kg Sb, <10- to 48-mg/kg P, and <0.5- to 53-mg/kg Co) that were used as polymerisation catalysts, stabilisers, oxidation catalysts, and bluing agents. Furthermore, when these residual element concentrations in 21 commercial mineral-water PET bottles were determined, there was no significant difference from unused bottles.     

Reactivity of poly(vinyl chloride) containing N-methyl dithiocarbamate toward metal ions in heterogeneous system and effect of γ-irradiation on the reactivity

The reaction of poly(vinyl chloride) containing N-methyl dithiocarbamate (PMD) with metal ions in a heterogeneous system and the effect of γ-irradiation on the reactivity were studied. PMD powder suspended in aqueous solutions did not show any reactivity toward metal ions. However, the PMD powder suspended in a methyl alcohol solution formed a chelate with various metal ions. The effects of the reaction time, pH, and the initial concentration of the metal ion were examined. PMD irradiated in methyl alcohol with γ-irradiation doses up to 28 Mrad was compared with the original PMD. The reactivity of the irradiated PMD toward the metal ions did not show any apparent decrease.     

Grain growth in microwave sintered Si3N4 ceramics sintered from different starting powders

Silicon nitride ceramics have been produced by microwave sintering at 28 GHz with Y₂O₃, Al₂O₃ and MgO as sintering additives. The effect of initial β content of the Si₃N₄ starting powder on the microstructural development has been assessed by scanning electron microscopy (SEM) and quantitative image analysis. Phase transformation behaviour was assessed by X-ray diffraction. Mechanical properties of the sintered bodies were determined through assessment of hardness and fracture toughness. It was found that the samples sintered from powders with lower initial β content developed larger grains than those from higher β content powders, due to fewer nucleation sites during the →β transformation. However, attempts to develop a more bimodal microstructure by using a mixture of the two grades of powder, in an effort to increase both fracture toughness and fracture strength, were unsuccessful. In this case the microstructure was similar to that developed in the materials produced from higher β content powders. The mechanical properties of the sintered bodies were very similar, despite differences in microstructure. This was attributed to the strong bonding between the grains and grain boundary phase resulting in crack paths in all the materials that were predominantly transgranular, with little debonding or crack deflection. Under these circumstances the effect of larger grains is eliminated.     

Water quality characteristics of rivers and ponds in Japan

In Japan, various countermeasures have been taken to improve the water quality of public waters such as rivers and lakes. Though water quality has improved, it is still insufficient. In summer, eutrophication is seen in lakes and inner bays, as well as rivers. As a countermeasure to prevent eutrophication, the removal treatment of nutrient salts such as nitrogen and phosphorus is done, in addition to organic substance elimination in the domestic sewerage system. This report will show the water quality characteristics of rivers and ponds in Japan It is considered that these investigative results are effective when the water quality improvement of the stabilization ponds where eutrophication occurs are examined in China.