Formation of radioactive cesium microparticles originating from the Fukushima Daiichi Nuclear Power Plant accident: characteristics and perspectives

ABSTRACT

Following identification of radioactive Cs microparticles (CsMPs) in aerosol samples from the Fukushima Daiichi Nuclear Power Plant (FDNPP), numerous reports on CsMPs have been published. This paper reviews recent progress in the measurement and characterization of CsMPs by advanced analytical techniques, including advanced transmission electron microscopy (TEM) and synchrotron X-ray analysis. These analyses revealed that the CsMPs contained Si, Fe, Zn, Cs, and minor quantities of U together with some fission products. Uranium in the CsMPs was identified as being in the form of uraninite and (U,Zr)O₂. Detailed advanced TEM analysis has clarified some of the processes resulting in the alteration of constituents of the nuclear fuels and containment vessel materials during this severe accident. In addition, a detailed report on the elemental compositions and structures of the fuel debris fragments collected inside and outside of the primary containment vessel²⁵ highlighted the fact that the fuel debris fragments contained nanoparticles with the U and Zr components having similar structures to that of the CsMPs. This similarity in structures has stimulated further research on the structure and elemental constituents, especially for U and Zr in the CsMPs, and has opened up new avenues for studying the chemical characteristics of the fuel debris.     

An Investigation of Capacitors for Flying Capacitor Converters

Multilevel converters can essentially reduce harmonics even when their switching frequency is low. Among the various topologies of the multilevel converters, flying capacitor converters are considered to be promising converters for realizing high power density. However, the main circuit of the flying capacitor converters has many capacitors. Therefore, in this study, the volume of the capacitors in the flying capacitor converters is determined by taking into consideration the allowable ripple voltage and temperature rise in the capacitor. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 81–91, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22361     

Determination of optical purity and absolute configuration of natural 12‐hydroxystearic acid by the 1H NMR anisotropy method

The enantiopure of (R)‐(?) MαNPA was allowed to react with racemic 18‐(tert‐butyldimethylsilyloxy)‐5‐octadecayne‐7‐ol which was derived from dodecane‐1,12‐diol, yielding diastereomeric esters mixture. These racemic esters were easily separated by HPLC on silica‐gel. The absolute configurations of the first‐eluted diastereomeric esters from the separated esters were determined using ¹H NMR anisotropy method. Analysis on ¹H NMR spectra and HPLC elution time of the synthesized esters and those of MαNP ester derived from natural methyl‐12‐hydroxystealate showed that the absolute configuration of natural 12‐hydroxystearic acid was R form, and the enantiomeric excess was over 99%.     

Approximate method of estimating seismic performance of high‐rise buildings with oil‐dampers

When subjected to long‐period ground motions, many existing high‐rise buildings constructed on plains with soft, deep sediment layers experience severe lateral deflection, caused by the resonance between the long‐period natural frequency of the building and the long‐period ground motions, even if they are far from the epicenter. This was the case for a number of buildings in Tokyo, Nagoya, and Osaka affected by the ground motions produced by the 2011 off the Pacific coast of Tohoku earthquake in Japan. Oil‐dampers are commonly used to improve the seismic performance of existing high‐rise buildings subjected to long‐period ground motion. This paper proposes a simple but accurate analytical method of predicting the seismic performance of high‐rise buildings retrofitted with oil‐dampers installed inside and/or outside of the frames. The method extends the authors' previous one‐dimensional theory to a more general method that is applicable to buildings with internal and external oil‐dampers installed in an arbitrary story. The accuracy of the proposed method is demonstrated through numerical calculations using a model of a high‐rise building with and without internal and external oil‐dampers. The proposed method is effective in the preliminary stages of improving the seismic performance of high‐rise buildings.     

Reactivity of poly(vinyl chloride) containing N-methyl dithiocarbamate toward metal ions in heterogeneous system and effect of γ-irradiation on the reactivity

The reaction of poly(vinyl chloride) containing N-methyl dithiocarbamate (PMD) with metal ions in a heterogeneous system and the effect of γ-irradiation on the reactivity were studied. PMD powder suspended in aqueous solutions did not show any reactivity toward metal ions. However, the PMD powder suspended in a methyl alcohol solution formed a chelate with various metal ions. The effects of the reaction time, pH, and the initial concentration of the metal ion were examined. PMD irradiated in methyl alcohol with γ-irradiation doses up to 28 Mrad was compared with the original PMD. The reactivity of the irradiated PMD toward the metal ions did not show any apparent decrease.     

Highly Transparent Lu-α-SiAlON

Novel Lu-α-SiAlON ceramics were produced by hot pressing mixtures of Si₃N₄, Lu₂O₃, AlN, and Al₂O₃ at 1950°C for 2 h in a nitrogen atmosphere. The resultant SiAlON was fully dense and possessed a uniform, equiaxed microstructure with a grain size of ∼1 μm, which resulted in a high hardness of >19 GPa. In addition to high hardness, the sample showed very high optical transparency in the visible light region, with >70% transmission at higher wavelengths. This high transparency was attributed to the uniform, dense microstructure and lack of residual grain-boundary phase.     

k-NN classification of handwritten characters via accelerated GAT correlation

This paper addresses the problem of reinforcing the ability of the k-NN classification of handwritten characters via distortion-tolerant template matching techniques with a limited quantity of data. We compare three kinds of matching techniques: the conventional simple correlation, the tangent distance, and the global affine transformation (GAT) correlation. Although the k-NN classification method is straightforward and powerful, it consumes a lot of time. Therefore, to reduce the computational cost of matching in k-NN classification, we propose accelerating the GAT correlation method by reformulating its computational model and adopting efficient lookup tables. Recognition experiments performed on the IPTP CDROM1B handwritten numerical database show that the matching techniques of the simple correlation, the tangent distance, and the accelerated GAT correlation achieved recognition rates of 97.07%, 97.50%, and 98.70%, respectively. The computation time ratios of the tangent distance and the accelerated GAT correlation to the simple correlation are 26.3 and 36.5 to 1.0, respectively.     

Numerical Evaluation of Toughening by Crack-Face Grain Interlocking in Self-Reinforced Ceramics

Crack bridging associated with the pull-out process of interlocking grains in self-reinforced ceramic materials is studied through a micromechanical simulation. The pullout of a single inclined grain is modeled via the numerical solution of a general contact problem. The bridging-force versus crack-opening-distance curve indicates a nonlinear, springlike response for the pullout of interlocking grains. The sliding friction along the debonded interface, induced by highly localized contact stresses, dominates the total bridging force. The bridging force increases with grain inclination until eventual bridge failure. The pullout of misaligned grains mainly affects short-crack toughening, with a rising R -curve, whereas aligned grains contribute to long-crack toughening. The residual stresses of the thermal expansion anisotropy play a minor role in the pull-out process of grain interlocking and the resultant toughening. The proposed mechanism is operative in both single-phase and composite ceramics in which pullout of elongated grains/reinforcements occurs.     

Relationship between Ba atom emission and electrode temperature in a low-pressure fluorescent lamp

A relationship between emission characteristics of Ba atom as an emitter material and temperature distributions of an electrode in a fluorescent lamp is described, which is measured by using laser-induced fluorescence and black-body radiation method, respectively. In a virgin lamp, a hot spot observed at the electrode edge connected to the power supply is the main source of Ba atom emission. In a long-term-used lamp, it is shown that Ba atom emission, thermionic electron emission in cathode half-cycle and electron collection in anode half-cycle are most active on the hot spot appearing on the center of the electrode.