跳时超宽带无线电的性能分析

超宽带脉冲无线电是无线通信领域的一种全新技术,有着广阔的应用前景.它是一种基带无载波短脉冲,不同于使用正弦载波的传统通信系统.本文用满足FCC频谱规划的脉冲--高斯脉冲的五阶导数推导了TH-BPSK方式下的跳时超宽带扩频系统的误码与多址性能,并研究了多径对其性能的影响,比较了TH-BPSK 与TH-PPM系统性能,分析结果表明TH-BPSK的性能(未考虑多径)明显优于TH-PPM,但是TH-PPM抗多径性能优于TH-BPSK.     

Enhanced light output in nitride-based light-emitting diodes by roughening the mesa sidewall

In this letter, we will report on a nitride-based light emitting diode with a mesa sidewall roughening process that increases light output power. The fabricated GaN-based light-emitting diode (LED) wafers were first treated through a photoelectrochemical (PEC) process. The Ga/sub 2/O/sub 3/ layers then formed around the GaN : Si n-type mesa sidewalls and the bottoms mesa etching regions. Selective wet oxidation occurred at the mesa sidewall between the p- and the n-type GaN interface. The light output power of the PEC treated LED was seen to increase by about 82% which was caused by a reduced index reflectance of GaN-Ga/sub 2/O/sub 3/-air layers, by a rough Ga/sub 2/O/sub 3/ surface, by a microroughening of the GaN sidewall surface, and by a selective oxidation step profile of the mesa sidewall that increases the light-extraction efficiency from the mesa sidewall direction. Consequently, this wet PEC treated process is suitable for high powered nitride-based LEDs lighting applications.     

离散事件系统状态反馈控制的几何理论的进一步拓广

本文研究了定义在状态-事件序列上的谓词的离散事件系统的状态反馈控制问题。离散事件系统的数学模型是自动机。状态反馈与闭环过程的关系及许多基本的几何性质得到了详细的阐明;在这些几何背景下,解决了离散事件系统状态反馈控制的拓广问题,包括关于简单谓词与一般谓词的问题。     

PARLOG顺序编译实现技术

PARLOG语言是一种并行逻辑程序设计语言。其关系定义分为单解关系和所有解关系。本文着重讨论PARLOG单解关系基于与/或树模型和进程调度方法的顺序编译实现技术。     

Generalized difference control of parallel streams temperatures

A furnace with multiple parallel passes and multiple burners is commonly seen in petroleum refineries. In order to maintain the furnace running in a safe, stable, and high-efficiency state it is necessary to control the outlet temperatures of the multiple passes to be the same. Due to the fact that the process of the oil heating in such furnace is nonlinear, multivariable, time varying, has serious coupling among passes, has frequent dynamic changes and a large time delay, traditional control methods have trouble in controlling these temperatures, and some advanced control methods, including predictive control, adaptive control, and robust control, are usually too complex for convenient use. In this paper, a control technique, called differences control technique (DsCT), is proposed to distribute the stream flowrates such that the stream temperatures are as identical as possible. The principle of the proposed technique is explained and demonstrated, and the results of its application to a real-life petroleum refinery furnace are also reported. The DsCT technique has the following advantages: it does not need complicated design procedures, the controller structure is simple, it is easy to apply, and it can be canonically applied to furnaces with different number of passes.     

CO2泡沫压裂优化设计技术及应用

针对苏里格低压、低渗透气藏常规水基压裂液压后返排困难,导致储层水锁伤害的问题,研究利用CO2泡沫压裂来降低压裂液滤失,提高压裂液返排率,降低对储层的伤害。有针对性地研究了CO2泡沫压裂优化设计技术,包括:CO2泡沫压裂起泡技术、酸性交联技术、变泡沫质量和恒定内相设计技术等。现场应用表明,长庆苏里格气田气藏应用CO2泡沫压裂技术,可大大提高返排率,缩短压裂液返排时间,降低压裂液对气层的伤害,提高压裂效果。     

颗粒增强钢基复合材料轧辊研究的现状

分析了轧辊的发展趋势,探究了颗粒增强钢基复合材料的力学性能,揭示了颗粒增强钢基复合材料轧辊的性能优势;概述了颗粒增强钢基复合材料轧辊的发展现状和各种制备工艺,并简要分析了轧辊材料的发展.     

退火对GaAs窗口晶体断裂模数的影响

LEC GaAs晶片经高温退火后，残余应力得以部分释放；从而减小残余应力诱生断裂的可能性，提高了GaAs晶体的断裂模数。原生GaAs晶片加工的样品的断裂模数平均值约为135MPa，经退火的GaAs晶片加工样品的断裂模数平均值更高，约为150MPa，断裂模数最高值达163MPa。     

电镀企业火警和爆鸣事故实例

列举了作者经历的18种火警和爆呜事故，为电镀企业敲响警钟，安全重于泰山。     

清肝明目夏枯草

“夏枯草，味苦辛，性寒，可入肺气郁结所致瘰疬……效果极佳。”但是。在万千而神奇的大自然中，选择夏季这个生命力最为茂盛的季节来结束自己生命的花花草草其实很多。为什么独独夏枯草占了“夏枯”之名？[编者按]