固相法低度氯化聚乙烯耐老化性能的研究

用室温对折断裂试验,研究固相法低度氯化聚乙烯老化性能,当氯含量约为7.4％时,其老化时间发生突跃,老化时间发生突跃时,氯含量与试样的氯化温度和老化温度有关.     

Local orders,lattice distortions,and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb,Ti, V)

High-entropy carbides (HECs) are regarded as potential candidate structural materials with attractive mechanical properties due to their ultra-high hardness. It is essential to reveal the atomic and electronic basis for strengthening mechanism in order to develop the advanced HECs. In the present work, C (M = Nb, Ti, V) are selected as case studies. The effects of transition metals (M) on the lattice parameters, bulk modulus, enthalpy of formation, electron work function (EWF), and bonding morphology/strength of HECs are comprehensively studied by first-principles calculations. It is found that the lattice parameters, equilibrium volumes, and bulk modulus of HECs are improved with the increase of M atomic volumes. The atomic-size differences among various groups of elements not only result in the lattice mismatch/distortion but also contribute to the formation of weak spots. In the view of bonding charge density, the electron redistributions caused by the coupling effect of the lattice distortion and valance electron differences can be revealed obviously, which identify the different bonding strength. Moreover, in terms of EWF, the proposed power-law-scaled hardness of HECs is validated and matches well with those reported theoretical and experimental results, providing a strategy to design advanced HECs with excellent mechanical properties.     

基于RFID的虚拟标签算法研究与改进

针对室内定位算法VIRE的定位精度,特别是邻近边界目标的定位精度较低的问题,以RFID标签定位为研究基础,从改变VIRE算法中虚拟标签的插值方式和在边界上加入虚拟标签两个方面进行研究和改进。使用拉格朗日插值代替VIRE算法中的线性插值方式,使虚拟标签的数据更加接近实际环境值;在边界上加入虚拟参考标签能增加已知标签数,防止在计算待定位标签坐标时引入误差标签。实验结果表明,标签定位精度有了明显提高,整体能提高了35%,邻近边界标签定位精度提高较大,可达到50%以上。     

静电纺丝纳米纤维膜空气过滤研究进展

静电纺丝纳米纤维膜具有高比表面积、孔径小、孔隙率高、纤维均一性好等优点,在空气过滤及个体防护等领域表现出巨大的应用潜力.总结了近年来国内外关于静电纺丝法制备高效低阻和功能化(抗菌、可降解、疏水和耐高温)新型空气过滤材料的最新研究成果,分析和讨论了现有研究中存在的问题,并对未来的发展方向进行了展望.     

我国发展天然气合成油技术的可行性分析

随着能源危机,天然气合成油(GTL)技术正逐渐升温。在全球石油价格不断飞升的前提下,以及日益苛刻的环境法规中,GTL技术作为一种生产清洁型燃料的新兴技术,面临着巨大的发展机遇。在此,我国应加强GTL技术的研究力度,争取早日在我国使其工业化。     

共炭化对热缩聚及炭化工艺过程的影响

采用煤沥青闪蒸油为原料,乙烯残油为添加剂,在实验室内进行热缩聚及炭化实验。结果表明:加入添加剂后,缩聚沥青的平均分子结构得到改善,从而显著改善了针状焦的显微组织结构,同时具有良好的脱氮效果。     

两种沥青炭微观结构和性能的对比研究

将高温煤沥青和浸溃荆沥青在92MPa下炭化，在2500℃下对所得沥青炭进行石墨化处理；测试了所得沥青炭的体积密度、开孔率、比表面积（SBET）；利用扫描电子显微镜（SEM）观察了所得沥青炭的显微结构；利用X射线衍射方法（XRD）检测了所得沥青炭石墨化处理后的石墨化度；测试了所得沥青炭的氧化性能；测试了沥青炭试样的比热容、导热系数、热扩散率和线膨胀系数。结果表明：在92MPa下，两种沥青炭有着相近的密度和开孔率；浸渍剂沥青炭的SBEt高于高温煤沥青炭；浸渍荆沥青炭为流线型结构，高温煤沥青炭为镶嵌型和域型并存的结构；流线型结构沥青炭石墨化度较高；高温煤沥青炭的抗氧化性能要好于浸溃荆沥青炭；随着沥青炭石墨化程度的增大，比热客、导热系数、热扩散率都增大，而线膨胀系数减小。     

低温低压下非均相催化氧化处理焦化废水实验研究

研究了非均相催化剂在低温低压条件下处理焦化废水的效果,通过改变催化剂的载体、浸渍溶液的种类及浓度、pH值、反应时间、催化剂的投加量、H2O2(质量分数30%)的投加量等因素,得出在低温低压下非均相催化氧化处理焦化废水的最佳条件:采用经Cu(NO3)2溶液浸渍后的γ-Al2O3为催化剂、在pH值为3、催化剂体积分数为40%、H2O2投加体积分数为4%、反应时间在3 h以上时处理效果较好.原水CODCr由4 540 mg/L降至600mg/L以下,氨氮由552 mg/L降至160 mg/L以下.     

Automatic inpainting by removing fence-like structures in RGBD images

Recent inpainting techniques usually require human interactions which are labor intensive and dependent on the user experiences. In this paper, we introduce an automatic inpainting technique to remove undesired fence-like structures from images. Specifically, the proposed technique works on the RGBD images which have recently become cheaper and easier to obtain using the Microsoft Kinect. The basic idea is to segment and remove the undesired fence-like structures by using both depth and color information, and then adapt an existing inpainting algorithm to fill the holes resulting from the structure removal. We found that it is difficult to achieve a satisfactory segmentation of such structures by only using the depth channel. In this paper, we use the depth information to help identify a set of foreground and background strokes, with which we apply a graph-cut algorithm on the color channels to obtain a more accurate segmentation for inpainting. We demonstrate the effectiveness of the proposed technique by experiments on a set of Kinect images.     

Effect of the processing molding temperature on the crystalline structure and properties of acrylonitrile‐butadiene rubber/trinylon thermoplastic vulcanizates

The effect of the processing molding temperature on the properties and crystalline structure of acrylonitile‐butadiene rubber (NBR)/nylon 6,66,1010 (trinylon) thermoplastic vulcanizates (TPV) was studied. With decreasing molding temperature, the stress at 100% and elongation at break of TPV changed slightly, and the solvent resistance of TPV improved. The best conditions for processing molding were 170°C and 12 min. The crystalline structure of the nylon continuous phase in TPV was investigated by X‐ray diffraction, polarized optical microscopy, and differential scanning calorimetry. The results show that the crystalline structure of the nylon phase in TPV was more perfect/orderly and formed α‐crystalline structure at a processing molding temperature of 170°C. Therefore, the oil resistance of NBR/trinylon TPV clearly improved. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1374–1379, 2006