Intermittency-friendly and high-efficiency cogeneration: Operational optimisation of cogeneration with compression heat pump,flue gas heat recovery,and intermediate cold storage

This paper develops, implements, and applies a mathematical model for economic unit dispatch for a novel cogeneration concept (CHP-HP-FG-CS (CHP with compression heat pump and cold storage using flue gas heat)) that increases the plant’s operational flexibility. The CHP-HP-FG-CS concept is a high-efficiency and widely applicable option in distributed cogeneration better supporting the co-existence between cogenerators and intermittent renewables in the energy system.The concept involves integrating an efficient high-temperature compression heat pump that uses only waste heat recovered from flue gases as low-temperature heat source, and an intermediate cold thermal storage allowing for non-concurrent operation of the cogeneration unit and the heat pump unit.The model is applied for a paradigmatic case study that shows how the integration of a heat pump affects the operational strategy of a cogeneration plant. It is found that CHP-HP-FG-CS offers significant reductions in fuel consumption (?8.9%) and operational production costs (?11.4%). The plant’s fuel-to-energy efficiency increases from 88.9 to 95.5%, which is state-of-the-art.The plant’s intermittency-friendliness coefficient Rc improves only marginally due to the constrained nature of the low-temperature heat source and the associated small capacity of the heat pump unit. Significant improvements in Rc are found when increasing the heat pump capacity assuming the availability of an unconstrained heat source.     

Interaction between carbon dioxide and ionic liquids: Novel electrolyte candidates for safer Li-ion batteries

Ionic liquids (ILs) are typically molten salts at temperatures lower than 100 °C. Because of their thermal and electrochemical properties, they are good candidates to replace the state-of-the-art electrolytes used in today's Li-ion batteries. These commercial batteries often suffer from hazards caused by possible misuse. Elevated voltages and high temperatures usually lead to electrolyte degradation due to parasitic reactions with the electrodes leading to gas (mainly CO₂) evolution and may then eventually catch fire. Also, ILs are able to dissolve various gas molecules, making it possible to prevent a built-up of an overpressure inside the battery in case of undesired gas evolution. In this work, CO₂ storage in two different ionic liquids, i.e. PYR₁₄TFSI and [BMIm][BF4] is studied with regard to their respective Li-salt. Mixtures of ILs plus different concentrations of CO₂ were made. Phase diagrams of the pressure vs. temperature of the systems “liquid + vapour” to liquid transitions are drawn. Data points from 1.5 bar to 70 bar are collected with a Cailletet apparatus. Both of the ILs show good CO₂ dissolution ability; an increase of the temperature leads to an increase of the pressure needed to dissolve similar amounts of CO₂. The presence of a Li-salt hampers gas storage, particularly for PYR₁₄TFSI. A model based on the Langmuir adsorption theory is used to describe the solubility of the CO₂ in [BMIm][BF4]. The PYR₁₄TFSI IL does not obey the Langmuir-like solubility behaviour. Hence, the solubility then is described by the formation of discrete bonds between the CO₂ and the solvent, similarly to the concept of adspecies and surface sites.     

The role of correspondence sections in post-publication peer review: A bibliometric study of general and internal medicine journals

Scientific journals claim that correspondence sections are for post-publication peer review. We compared the conditions for submission and the bibliometrics of letters-to-editors published in leading medical journals in 2002 and 2007 using journal-derived information and data from PubMed and Journal Citation Reports. The median time limit for letter submissions decreased from 6 to 3.5 weeks, the median word limit from 400 to 350. The median number of letters per published article was near one in both years. Only about half of the letters were followed by an author reply in either year. Electronic response systems were available for four journals in 2007.     

Greenhouse gas emissions from power generation and consumption in a nordic perspective

During the last decade, there has been an intensive debate on-going in Sweden about how power generation and use affect global warming. More precisely, the discussion has considered how electricity shall be assessed from an environmental and climate perspective in different situations. This article gives a critical analysis on the main viewpoints. A number of environmental-impact assessment principles are outlined and critically examined. Concepts like average electricity and marginal electricity are discussed, and Electricity Disclosure as a basis for evaluation is addressed. The impact from Emission Trading and Tradable Green Certificates is also considered. Recommendations to concerned stakeholders are given. The clash points in the Swedish debate are highlighted and thus made available to a broader audience outside Scandinavia.     

Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell

This work constitutes detailed EIS (Electrochemical Impedance Spectroscopy) measurements on a PBI-based HT-PEM unit cell. By means of EIS the fuel cell is characterized in several modes of operation by varying the current density, temperature and the stoichiometry of the reactant gases. Using Equivalent Circuit (EC) modeling key parameters, such as the membrane resistance, charge transfer resistance and gas transfer resistance are identified, however the physical interpretation of the parameters derived from EC’s are doubtful as discussed in this paper. The EC model proposed, which is a modified Randles circuit, provides a reasonably good fit at all the conditions tested. The measurements reveal that the cell temperature is an important parameter, which influences the cell performance significantly, especially the charge transfer resistance proved to be very temperature dependent. The transport of oxygen to the Oxygen Reduction Reaction (ORR) likewise has a substantial effect on the impedance spectra, results showed that the gas transfer resistance has an exponential-like dependency on the air stoichiometry. Based on the present results and results found in recent publications it is still not clear what exactly causes the distinctive low frequency loop occurring at oxygen starvation. Contrary to the oxygen transport, the transport of hydrogen to the Hydrogen Oxidation Reaction (HOR), in the stoichiometry range investigated in this study, shows no measurable change in the impedance data. Generally, this work is expected to provide a basis for future development of impedance-based fuel cell diagnostic systems for HT-PEM fuel cell.     

Second-harmonic generation from biological tissues: effect of excitation wavelength

We report on the measurement of second-harmonic signals from hyperplastic parenchyma and stroma in malignant human prostate tissue under femtosecond pulsed illumination in the wavelength range from 730 to 870 nm. In particular, the relationship of the second-harmonic generation to the excitation wavelength is measured. The result in these two regions behaves considerably differently and thus provides a possible indicator for identifying tissue components and malignancy.     

Reconstructing Open Surfaces from Image Data

In this paper a method for fitting open surfaces to data obtained from images is presented using a level set representation of the surface. This is done by tracking a curve, representing the boundary, on the implicitly defined surface. This curve is given as the intersection of the level set describing the surface and an auxiliary level set. These two level sets are propagated using the same motion vector field. Special care has to be taken in order for the surfaces not to intersect at other places than at the desired boundary. Methods for accomplishing this are presented and a fast scheme for finding initial values is proposed. This method gives a piecewise linear approximation of the initial surface boundary using a partition of the convex hull of the recovered 3D data. With the approach described in this paper, open surfaces can be fitted to e.g. point clouds obtained using structure from motion techniques. This paper solves an important practical problem since in many cases the surfaces in the scene are open or can only be viewed from certain directions. Experiments on several data sets support the method.     

Lost in virtual space: Studies in human and ideal spatial navigation.

The authors describe 3 human spatial navigation experiments that investigate how limitations of perception, memory, uncertainty, and decision strategy affect human spatial navigation performance. To better understand the effect of these variables on human navigation performance, the authors developed an ideal-navigator model for indoor navigation whose optimizing algorithm uses a partially observable Markov decision process. The model minimizes the number of actions (translations and rotations) required to move from an unknown starting state to a specific goal state in indoor environments that have perceptual ambiguity. The authors compared the model's performance with that of the human observer to measure human navigation efficiency. Experiment 1 investigated the effect of increasing the layout size on spatial way-finding efficiency and found that participants' efficiencies decreased as layout size increased. The authors investigated whether this reduction in navigation efficiency was due to visual perception (Experiment 2), memory, spatial updating strategy, or decision strategy (Experiment 3). (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

An overview of JML tools and applications

The Java Modeling Language (JML) can be used to specify the detailed design of Java classes and interfaces by adding annotations to Java source files. The aim of JML is to provide a specification language that is easy to use for Java programmers and that is supported by a wide range of tools for specification typechecking, runtime debugging, static analysis, and verification.This paper gives an overview of the main ideas behind JML, details about JML’s wide range of tools, and a glimpse into existing applications of JML.     

Making XML document markup international

In name and in practice, the World‐Wide Web (hereafter Web) is used around the World beyond English‐speaking areas. This creates a tremendous need to internationalize standard terminology used in the technologies that make the Web possible. Existing efforts on XML internationalization (i18n) and localization (i10n) have focused on the content of XML documents instead of the terms used in markup (annotations) such as elements and attributes. The SGML standard ISO 8879 supports the use of Unicode (ISO 10646) throughout a document, including markups. However, most elements and attributes of XML documents are still defined in English, thereby limiting their use among non‐English speakers. This paper presents an XSLT‐based method that can completely localize the markup of XML documents into different natural languages. We also describe how the proposed technique can be applied to translation problems in programming (e.g. C and Java) or documentation (e.g. LAT_EX or other formatting languages) so that a program or a document can be converted to and from an XML format. Copyright © 2004 John Wiley & Sons, Ltd.