FS-1化学镀Ni-P镀层的性能研究

采用XRD与SEM分析技术、电化学阳极极化曲线测试和 摩擦磨损试验等，系统地研究了FS-1化学镀Ni-P镀层的结构和性能.结果表明：该镀层具有 优良的耐蚀和耐磨性能，热处理虽可以显著地提高镀层的耐磨性能，但使其耐蚀性能有所降 低.     

非晶态Pd—Cu—Si合金的晶化动力学研究

本文应用DSC研究了非晶态Pd-Cu-Si合金的晶化过程动力学.根据Kissinger峰移法和Arrhenius方程分别计算了晶化激活能,发现等温晶化动力学在0.15相似文献   

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

酸性Ni-Mo-P/Ni-P双层化学镀工艺研究

对酸性Ni-Mo-P／Ni—P双层直接连续化学镀的工艺进行了试验研究。通过对钼酸根与次磷酸根加量比对镀速的影响，络合剂与pH对镀速及成分影响的研究，优化得到一种双层化学镀的酸性镀液的组成。试验研究了钼含量对镀层结构的影响，进而确定了具有非晶结构的双层镀的最佳工艺并对其性能进行了研究。     

Effect of sintering process on microstructure and magnetic properties of high frequency power ferrite

An oxide ceramic process was adopted to prepare high frequency manganese-zinc (MnZn) power ferrite. In combination with the microstructure analysis of material, the influences of sintering process on initial permeability (μi) and high frequency loss in unit volume (Pcv) of MnZn power ferrite were investigated. The results show that in order to obtain fine microstructure and high frequency properties, the preferable sintering temperature and atmosphere are 1230 ℃ and oxygen partial pressure ( PO2) of 4%, respectively.     

Microstructure and magnetic performance of Ni-substituted high density MnZn ferrite

The effects of NiO on microstructure and magnetic properties of Mn-Zn ferrite with a nominal composition of Zn0.32Mn0.60-xNixFe2.08O4 were investigated. The calcined powder of Mn-Zn ferrite was characterized by X-ray diffraction (XRD), the fracture surface of Mn-Zn ferrite was checked by scanning electronic microscope (SEM), and then the magnetic properties were measured. As a result, the substitution of Ni can cause the crystallattice constant of MnZn ferrite to decline, and the grain size to decrease, therefore improve the magnetic performance of MnZn ferrite whose density exceeds 5.0 g·cm-3.     

Continuous cleaning of A356 alloy melt using high frequency electromagnetic field

A set of device for electromagnetic separation (EMS) was designed and applied to process the continuous flowing melt. Tensile test was employed to compare effect of electromagnetic separation with that of the traditional processes. Compared with filtration by ceramic foam filter and process without filtration, multiple process combined with filtration and electromagnetic separation can effectively remove most of inclusions with diameter finer than 10μm in A356 alloy casting, hence improve its tensile properties. After being processed by electromagnetic filtration,the tensile strength of A356 scrap is enhanced by 8.27%, approaching the level of fresh A356 alloy.     

基于小脑模型神经网络控制的混合驱动连杆机构控制系统研究

混合驱动连杆机构系统是一种新型的可控机构,采用一个不可控电机和一个实时可控电机作为驱动元.两种类型的输入运动通过一个两自由度运行机构复合后,可得到柔性输出运动.位置控制系统对保证混合驱动连杆机构输出精度起着决定性的作用,其控制系统要求实现高精度的跟随运动.文章运用复合控制思想,基于小脑神经网络,设计了混合驱动性杆机构的复合控制系统,并进行了仿真实验.仿真结果表明,该方法可以显著提高系统精度,且具有良好的控制性能.     

Influence of expandable graphite on fire resistance and water resistance of flame-retardant coatings

Expandable graphite (EG) coating and ammonium polyphosphate-pentaerythritol-melamine (APP-PER-MEL) coating were prepared. Thermal degradation and char formation of the coatings were investigated by differential thermal analysis (DTA), thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results have shown that the anti-oxidation and fire-resistant properties of expandable graphite coating containing EG with size of 74 μm are better than those of APP-PER-MEL coating. The static immersion test was applied to study water resistance of the coatings, and the fire protection test and mechanical test were used to analyse heat insulation and mechanical properties of coatings before and after water immersion. The fire-resistant and mechanical properties of APP-PER-MEL coating were severely damaged by water immersion, whereas EG coating containing 8.5% EG with size of 74 μm could retain the good fire resistance even after 500 h water immersion.     

柴油机活塞环耐磨性探讨

通过分析活塞环的基体组织、径向弹力与气缸套的匹配以及对其施行表面处理，以提高活塞环的耐磨性。对活塞环进行调质或渗氮处理，可显著提高其使用寿命。