钢板剪力墙的分类及性能

对钢板剪力墙结构进行分类讨论,分析了墙板本身的力学性能、使用性能以及与框架的相互作用;探讨了内嵌钢板与框架栓接或焊接的典型连接方式,并从制作安装、使用性能和对墙板性能的影响3个方面比较了栓接与焊接的优劣;分析了各类钢板剪力墙的特点和适用范围,为设计人员在工程应用中选择恰当的钢板剪力墙类型提供了参考。     

碱处理对MCM-22分子筛催化汽油烷基化脱硫的影响

通过氢氧化钠碱处理对MCM-22分子筛进行了改性,并考察了经碱处理后的MCM-22分子筛在汽油烷基化反应中的催化性能。结果表明,经碱处理后的分子筛在微介孔并存的情况下出现了介孔变大且原有的微孔结构保持几乎不变的情形,同时分子筛的酸性中心也得到增强,致催化剂的活性、稳定性都有所增加。     

论中外合作办学中的若干关系——以武汉科技学院的实践为例

以武汉科技学院的办学实践为例,论述了中外合作办学项目发展路径选择上要立足社会需求,充分发挥自身办学特色,做到＂人无我有＂、＂人有我特＂。办学过程中,要始终坚持办学质量第一,绝不能为了节约成本降低质量要求。在项目（机构）运行中,要理顺管理体制和运行机制,处理好与学校及相关院系的关系,还要以平等双赢为原则,处理好与外方的关系。     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

Effects of main factors on remedying northern landscaping water by hybrid ecological filter

Natural zeolite and coal cinder were layered as main packing medium of the ecological filter instead of traditional filling to remedy the static lake water in Northern China.The ecological filter was running in a combined upward and downward flow mode.Dynamic experiments were carried out to study the effects of retention time and ambient temperature on pollutants’ removal efficiency of the hybrid ecological filter.The function of plant was also studied by contrast test.It is showed that the removal efficiencies of NH4+-N and TP are increased when the retention time is changed from 1 h to 2 h and 4 h,but the removal efficiency of TN is decreased,the removal efficiency of NH4+-N is increased from 91.5% to 98% and that of TP is increased from 31.8% to 52.5%.When the temperature declines,the temporal removal efficiency of NH4+-N is reduced,but the removal efficiency of 24 h and 48 h is remained.The removal efficiency of TP after 24 h and 48 h is decreased when the temperature declines evidently.The retention time plays an important role in NH4+-N and TP removal,and the ambient temperature is significant for TP removal.The plant favors for TP and organic matter removal but has little effect on TN removal.     

Dynamic fracture behavior of rock under impact load using the caustics method

We studied the dynamic fracture mechanical behavior of rock under different impact rates. The fracture experiment was a three-point bending beam subjected to different impact loads monitored using the reflected caustics method. The mechanical parameters for fracture of the three-point bending beam specimen under impact load are analyzed. The mechanism of crack propagation is discussed. Experimental results show that the dynamic stress intensity factor increases before crack initiation. When the dynamic stress intensity factor reaches its maximum value the crack starts to develop. After crack initiation the dynamic stress intensity factor decreases rapidly and oscillates. As the impact rate increases the cracks initiate earlier, the maximum value of crack growth velocity becomes smaller and the values of dynamic stress intensity factor also vary less during crack propagation. The results provide a theoretical basis for the study of rock dynamic fracture.     

Surface wear resistance properties of Ta＋N implanted W18Cr4V high speed steel

High-speed steel W18Cr4V is commonly used in industries such as blade and mould manufacturers because of its high level of hardness and toughness, red-hardness and resistance. Ion implantation is an effective method to improve the wear resis-tance of W18Cr4V. In our investigation, Ta and Ta+N ion implantation was performed on W18Cr4V high-speed steel. The surface properties after implantation were evaluated by measuring friction coefficients while the carbonyl phase of the surface was ana-lyzed by X-ray diffraction analysis. It was found that the friction coefficients of the treated samples were much lower. Samples implanted with Ta+N had a lower friction coefficients than samples implanted only with Ta. This can be attributed to the formation of a new chemical compound, Fe7Ta3, on both surfaces. An even harder chemical compound, Fe2N, was formed on both sttrfaces of Ta+N implanted samples.     

Stability control of gate groups in deep wells

In order to study stability control methods for a deep gate group under complex stresses, we conducted field investiga-tions and analyses of reasons for damage in the Xuzhou mining district. Three reasons are proposed: deep high stress, improper roadway layout and support technology. The stability control countermeasures of the gate group consist of an intensive design technology and responding bolt-mesh-anchor truss support technology. Our research method has been applied at the -1000 m level gate group in Qishan Coal Mine. Suitable countermeasures have been tested by field monitoring.     

RP—HPLC法检测华中五味子药材中的五味子醇甲的含量

研究了RP-HPLC法检测五味子药材中的五味子醇甲含量的方法.色谱条件为色谱柱VP-ODS柱(150 mm×4.6 mm,5μm);流动相:V(甲醇)∶V(水)=13∶7;检测波长250 nm;流速1.0 mL/min.检测结果为峰面积与浓度线性回归方程Y=2×106X+30 294(r=0.9995,n=7),五味子醇甲在0.03～3.0 mg/mL范围内线性良好,加样回收率101.01%,RSD为1.829%.研究结果表明,本方法是测定五味子药材中的五味子醇甲含量的理想方法,但不适合测定药材中的五味子乙素含量.