Pulsed Electric Current Sintering of Silicon Nitride

Pulsed electric current sintering (PECS) has been used to densify α-Si₃N₄ powder doped with oxide additives of Y₂O₃ and Al₂O₃. A full density (>99%) was achieved with virtually no transformation to β-phase, resulting in a microstructure with fine equiaxed grains. With further holding at the sintering temperature, the α-to-β phase transformation took place, concurrent with an exaggerated grain growth of a limited number of elongated β-grains in a fine-grained matrix, leading to a distinct bimodal grain size distribution. The average grain size was found to obey a cubic growth law, indicating that the growth is diffusion-controlled. In contrast, the densification by hot pressing was accompanied by a significant degree of the phase transformation, and the subsequent grain growth gave a broad normal size distribution. The apparent activation energy for the phase transformation was as high as 1000 kJ/mol for PECS, almost twice the value for hot pressing (∼500 kJ/mol), thereby causing the retention of α-phase during the densification by PECS.     

Fabrication of a concentric-circular focusing grating coupler by a conic-wave-front interference method and light-convergence experiments using the coupler

An interference method utilizing conic-wave-front light for the fabrication of a concentric-circular and chirped grating is proposed. The design method and fabrication of an interference lens that generates conic-wave-front light are also shown. A focusing element is constructed from a concentric-circular grating coupler with a 0.4-mm diameter and a concentric-circular focusing grating coupler with an annular aperture of 2-mm focal length and 2.0-4.0-mm diameter. Light-convergence experiments using the focusing element were able to obtain a focusing spot of 0.5 μm × 0.7 μm at half-intensity widths for a wavelength of 820 nm in combination with liquid-crystal polarization elements.     

New pixel driving circuit using self‐discharging compensation method for high‐resolution OLED micro displays on a silicon backplane

A new 4T2C pixel circuit formed on a silicon substrate is proposed to realize a high‐resolution 7.8‐μm pixel pitch AMOLED microdisplay. In order to achieve high luminance uniformity, the pixel circuit compensates its Vth variation of the MOSFET for the driving transistor internally by using self‐discharging method. Also presented are 0.5‐in Quad‐VGA and 1.25‐in wide Quad‐XGA microdisplays with the proposed pixel circuit.     

Automatic transaction of signal via statistical modeling

The statistical information processing can be characterized by the likelihood function defined by giving an explicit form for an approximation to the true distribution. This mathematical representation, which is usually called a model, is built based on not only the current data but also prior knowledge on the object and the objective of the analysis. Akaike^2,3) showed that the log-likelihood can be considered as an estimate of the Kullback-Leibler (K-L) information which measures the similarity between the predictive distribution of the model and the true distribution. Akaike information criterion (AIC) is an estimate of the K-L information and makes it possible to evaluate and compare the goodness of many models objectively. In consequence, the minimum AIC procedure allows us to develop automatic modeling and signal extraction procedures. In this article, we give a simple explanation of statistical modeling based on the AIC and demonstrate four examples of applying the minimum AIC procedure to an automatic transaction of signals observed in the earth sciences. Genshiro, Kitagawa, Ph.D.: He is a Professor in the Department of Prediction and Control at the Institute of Statistical Mathematics. He is currently Deputy Director of the Institute of Statistical Mathematics and Professor of Statistical Science at the Graduate University for Advanced Study. He obtained his Ph.D. from the Kyushu University in 1983. His primary research interests are in time series analysis, non-Gaussian nonlinear filtering, and statistical modeling. He has published over 50 research papers. He was awarded the 2nd Japan Statistical Society Prize in 1997. Tomoyuki Higuchi, Ph.D.: He is an Associate Professor in the Department of Prediction and Control at the Institute of Statistical Mathematics. He is currently an Associate Professor of Statistical Science at the Graduate University for Advanced Study. He obtained his Ph.D. from the University of Tokyo in 1989. His research interests are in statistical modeling of space-time data, stochastic optimization techniques, and data mining. He has published over 30 research papers.     

Large eddy simulation of two-phase reacting turbulent flow in a pilot-scale pulverized coal combustion furnace with flamelet model

Journal of Mechanical Science and Technology - A three-dimensional numerical simulation was performed to investigate the physics and combustion characteristics of a two-phase reacting turbulent...     

Development of gap sensing system for narrow gap laser welding

Narrow gap welding with an oscillation laser beam is one of the effective processes for thick plate welding. To put this welding process into practical manufacturing, a groove-sensing system using image processing for narrow gap welding with an oscillation laser beam is used. This developed system uses still images of the weld zone taken by a coaxial CMOS camera. It can recognize the position of the groove wall by analysing the brightness distribution in the still image. It can then control the oscillation width and the laser-irradiated area by calculating the groove width and the groove centre position. Some narrow gap welding experiments were performed to evaluate the performance of the developed system. The results revealed that the developed system is effective for narrow gap welding with an oscillation laser beam. Using this system, the narrow gap groove can be welded even if the groove width has changed during the welding process.     

Determination of seventeen pesticide residues in agricultural products by LC/MS

Residues of 17 pesticides in agricultural products were determined by LC/MS with an atmospheric pressure chemical ionization (APCI) interface in both positive and negative ion modes. Pesticides were extracted with acetonitrile, and the extracts were cleaned-up with a primary and secondary amine (PSA) mini-column eluted with acetone-hexane (1:1). Rice, orange and potato were spiked with the 17 pesticides at 0.1 microgram/g and analyzed by the proposed method. The average recoveries of these pesticides usually ranged from 70 to 98% and the relative standard deviations were usually around 10%. These results suggested that LC/MS with APCI could be used to determine the residue levels of the 17 pesticides in these crops.     

Nanocrystalline structure formation in Al-Mg-Sc alloys during severe plastic deformation

The possibility of formation of a nanocrystalline structure (with a grain size smaller than 100 nm) in four Al-Mg-Sc alloys with 3.1–5.9% Mg during severe plastic deformation by torsion at a hydrostatic pressure of 6 GPa (high-pressure torsion (HPT)) has been studied. Room-temperature HPT of the alloys is shown to produce a nanocrystalline structure if the magnesium content is more than 4% (in the range 0.16–0.31% Sc). As the magnesium content increases, the grain size decreases and is minimal (40–50 nm) in a 01570 alloy with 5.9% Mg and 0.3% Sc. The structure of the HPT-processed 01570 alloy remains nanocrystalline upon heating to 200°C or at a deformation temperature as high as 200°C. Postdeformation heating is found to cause aging processes. The hardening of all the Al-Mg-Sc alloys is maximal after HPT at 20°C followed by aging at 300°C.     

Determination of a sulfur-containing drug in human plasma by an improved method for sulfur chemiluminescence detection in combination with capillary gas chromatography

An improved method for sulfur chemiluminescence detection in combination with capillary gas chromatography was established. The method was applied to the analysis of a sulfur-containing antiasthma drug, S-1452, and its nine metabolities in human plasma. The high selectivity and sensitivity of the method allowed accurate quantitation of trace levels of these compounds in human plasma with no interferences from the biological components present. To enable stable measurements and maintain reproducibility over a long period, the performance characteristics of a commercially available instrument were investigated. The gas seal in the injection port was found to easily corrode through interaction of the sulfur analyte with the metal gas seal. To prevent this, a disk made from an alloy of platinum and gold (60:40) was mounted on the gas seal. The reproducibility of the measurement was improved remarkably by using the disk. The use of compressed air of high purity significantly lowered the signal-to-noise ratio. The optical filter was kept clean by using a nickel catalyst to trap ozone in place of copper manganese oxide (CuMn2O4). These improvements raised the sensitivity and selectivity with the lower quantitation limits of 0.5-1.0 ng/mL in human plasma.     

Structures of new acylated oleanene-type triterpene oligoglycosides, theasaponins E1 and E2, from the seeds of tea plant, Camellia sinensis (L.) O. Kuntze

Friedreich's ataxia is the first known autosomal recessive disease caused by an unstable trinucleotide expansion mutation. The most frequent mutation is expansion of a GAA repeat in the first intron of gene X25. We studied transmission of the expanded GAA repeat in 37 Friedreich's ataxia pedigrees and analysed blood and sperm alleles in eight patients. We showed intergenerational instability in 84% of the alleles with an overall excess of contractions. Both contractions and expansions of the GAA repeat occurred in maternal transmission with a stronger tendency to expand for smaller repeats and to contract for longer repeats. Paternally transmitted alleles contracted only. Parental age and the intergenerational change in expansion size were directly correlated in maternal transmission and inversely in paternal transmission. The size of the GAA expansion was slightly lower in patients than heterozygous carriers. Sperm analysis confirmed the tendency to contract of paternal alleles, which was more marked with ageing. The degree of contraction of the GAA repeat in sperm was much higher than that found in intergenerational transmission and was directly related to the repeat size. A blood expanded allele reverted to normal size in the sperm of one patient. This study suggests the existence of different mutational mechanisms in Friedreich's ataxia alleles, which occur both pre- and post-zygotically.