Note on ‘Construction of Double Sampling s‐Control Charts for Agile Manufacturing’

He and Grigoryan (Quality and Reliability Engineering International 2002; 18 :343–355) formulated the design of a double‐sampling (DS) s control chart as an optimization problem and solved it with a genetic algorithm. They concluded that the DS s control charts can be a more economically preferable alternative in detecting small shifts than traditional s control charts. We explain that, since they only considered the average sample size when the process is in control, their conclusion is questionable. Copyright © 2006 John Wiley & Sons, Ltd.     

Optimum power-saving method for power MOSFET width of DC/DC converters

An optimum power metal-oxide-semiconductor field effect transistor (MOSFET) width technique is proposed for enhancing the efficiency characteristics of switching DC-DC converters. By implementing a one-cycle buck DC-DC converter, it is demonstrated that the dynamic power MOSFET width controlling technique has a much improved power reduction whether the load current is light or heavy. The maximum efficiency of the buck converter is ~92% with a 3% efficiency improvement for the heavy load condition. The efficiency is further improved by ~16% for the light load condition as a result of the power reduction from the large power MOSFET transistors. Also proposed is a new error-correction loop circuit to enable a better load regulation than that of previous designs. Compared with the adaptive gate driver voltage technique, the optimum power MOSFET width can achieve a significant improvement in power saving. It is also superior to the low-voltage-swing MOSFET gate drive technique for switching DC-DC converters     

Robust State Feedback Control Through Actuators With Generalized Sector Nonlinearities And Saturation

In control systems, actuators often have nonlinear characteristics that can not be neglected. For linear systems driven by actuators satisfying the generalized sector condition, a robust state feedback controller synthesis method is proposed to achieve the ultimate boundedness control. The method is based on the linear matrix inequality approach and is easy to apply. As an important special case of the generalized sector condition, the saturation characteristic of actuators is discussed separately, and non‐conservative results are obtained.     

热释电探测器及其应用

详细论述了热释电探测器的工作原理，推导出探测器电流响应率、电压响应率、等效噪声功率和探测率的解析表达式，得出了电压响应率、电流响应率与斩波频率的关系。给出热释电材料的选择原则，介绍了热释电探测器的目前应用领域及未来可能的应用领域。     

A Hammerstein-based dynamic model for hysteresis phenomenon

The Hammerstein configuration, which includes a nonlinear static block followed by a linear dynamic block, is applied to model the rate-dependent and temperature-dependent hysteresis phenomenon. The nonlinear static block is realized by a modified Preisach model, which includes both the irreversible and reversible components of magnetization. The linear dynamic block is realized by a low-pass filter, which takes into account the rate-dependent effects of hysteresis. Temperature dependencies are incorporated into the model by fitting the model parameters as piecewise-linear functions of temperature. A procedure is described for the extraction of a single set of model parameters over the frequency, amplitude, and temperature ranges of interest. The theory is verified experimentally     

Detection of congenital müllerian duct anomalies using three-dimensional ultrasound

PURPOSE: The purpose of this study was to assess the value of 3-dimensional sonography in the diagnosis of congenital müllerian duct anomalies, which cause infertility, preterm labor, and first trimester abortion. METHODS: A prospective study was undertaken in which 40 patients with histories of repeated spontaneous abortions or infertility were first examined using conventional 2-dimensional sonography or hysterosalpingography. Three-dimensional transvaginal sonography was then performed. RESULTS: Twenty-eight women had müllerian duct abnormalities, and 12 women had normal uterine anatomy. Müllerian duct defects detected in this study were unicornuate uterus (3), bicornuate uterus (3), complete or partial septate uterus (12), arcuate uterus (9), and didelphic uterus (1). The diagnosis of müllerian duct anomalies in these patients was confirmed by laparoscopic and/or hysteroscopic examinations. Three-dimensional sonography demonstrated all congenital uterine abnormalities with a sensitivity and specificity of 100%. Separate uterus and bicornuate uterus could be correctly diagnosed using 3-dimensional sonography in 11 (92%) of 12 cases and 3 (100%) of 3 cases, respectively. These 2 abnormalities were commonly confused with each other using hysterosalpingography and conventional sonography. CONCLUSIONS: Three-dimensional sonography with image reconstruction is less expensive and less invasive than hysterosalpingography for the assessment of uterine anatomy and diagnosis of müllerian duct abnormalities. The ability to visualize both the uterine cavity and the myometrium on a 3-dimensional scan facilitates the diagnosis of uterine anomalies and enables the differentiation of septate from bicornuate uteri for preoperative surgical planning.     

Diurnal thermal cycling effects on microwave signatures of thin seaice

To investigate effects of diurnal thermal cycles on C-band polarimetric backscatter and millimeter-wave emission from sea ice, the authors carried out a winter experiment at the outdoor geophysical research facility (GRF) in the cold regions research and engineering laboratory (CRREL), the ice sheet grew from open sea water to a thickness of 10 cm in 2.5 days, during which they took polarimetric backscatter data with a C-band scatterometer, interlaced with brightness temperature measurements at 90 GHz in conjunction with meteorological and sea ice characterizations. The initial ice growth in the late morning was slow due to high insolation. As the air temperature dropped during the night, the growth rate increased significantly. Air temperature changed drastically from about -12 to -36°C between day and night, the diurnal thermal cycle repeated itself the next day and the growth rate varied in the same manner. Ice temperature profiles clearly show the diurnal response in the ice sheet with a lag of 2.5 h behind the time of the maximum short-wave incident solar radiation. The diurnal cycles are also evident in the millimeter-wave brightness temperature data, measured sea ice backscatter revealed substantial diurnal variations up to 6 dB with repeatable cycles in synchronization with the temperature cycles and the brightness temperature modulations, the diurnal cycles in backscatter indicate that the dominant scattering mechanism related to thermodynamic processes in sea ice is reversible, a diurnal backscatter model based on sea ice electrodynamics and thermodynamics explains the observed diurnal signature. This work shows that diurnal effects are important for inversion algorithms to retrieve sea ice geophysical parameters from remote sensing data acquired with a satellite synthetic aperture radar (SAR) or scatterometer on Sun-synchronous orbits     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Analysing inaccurate artifact usages in workflow specifications

Although many workflow models have been proposed, analyses on artifacts are seldom discussed. A workflow application with well structured and adequate resources may still fail or yield unexpected results in execution due to inaccurate artifact manipulation, for example, inconsistency between data flow and control flow, or contradictions between artifact operations. Thus, artifact analysis is very important since activities cannot be executed properly without accurate information. This paper presents a three-layer workflow model for designing a workflow and characterises the behaviour of an artifact by its state transition diagram. By abstracting common usages of artifacts, six types of inaccurate artifact usage affecting workflow execution are identified and a set of algorithms to detect these inaccurate usages in workflow specifications is presented. An example is demonstrated and then related works are compared.     

A 4.5-GHz 130-nm 32-KB L0 cache with a leakage-tolerant self reverse-bias bitline scheme

This paper describes a 32-KB two-read, one-write ported L0 cache for 4.5-GHz operation in 1.2-V 130-nm dual-V/sub TH/ CMOS technology. The local bitline uses a leakage-tolerant self reverse-bias (SRB) scheme with nMOS source-follower pullup access transistors, while preserving robust full-swing operation. Gate-source underdrive of -220 mV on the bitline read-select transistors is established without external bias voltages or gate-oxide overstress. Device-level measurements in the 130-nm technology show 72/spl times/ bitline active leakage reduction, enabling low-V/sub TH/ usage, 40% bitline keeper downsizing, and 16 bitcells/bitline. 11% faster read delay and 2/spl times/ higher dc noise robustness are achieved compared with high-performance dual-V/sub TH/ bitline scheme. Sustained performance and robustness benefits of the SRB technique against conventional dynamic bitline with scaling to 100- and 70-nm technology is also presented.