Effect of Support Materials on the Selective Methanation of CO over Ru Catalysts

Selective methanation of CO in the reformate gas (CO/CO₂/H₂/H₂O = 0.175/17.9/70.9/11.1) proceeded over Ru catalysts supported on metal oxides and zeolites. CO was selectively methanated at wide temperature ranges (200–275 °C) over Ru/γ-Al₂O₃, Ru/TiO₂ Ru/H-Y and Ru/H-beta catalysts. Higher Ru contents in Ru/γ-Al₂O₃ improved the selective CO methanation rate.     

Doping effect on sinterability of polycrystalline yttria: From the viewpoint of cation diffusivity

The sintering behavior of Y₂O₃ doped with 1 mol% of a trivalent or tetravalent cation was investigated by pressureless sintering in air. Ga³⁺ or Ge⁴⁺-doped Y₂O₃ bodies exhibited higher relative densities than the undoped Y₂O₃, while the La³⁺ or Zr⁴⁺-doping suppressed the densification of Y₂O₃. An interdiffusion experiment was performed on the diffusion couples of polycrystalline Er₂O₃ and Y₂O₃ doped with Ni²⁺ or Zr⁴⁺, which are some of the most effective and least effective dopants for the improvement of the sinterability, respectively. The lattice and grain boundary diffusion coefficients of the Er³⁺ cation in Y₂O₃ were increased by the Ni²⁺-doping, but were decreased by the Zr⁴⁺-doping. High-resolution transmission electron microscopy observations and nano-probe X-ray energy dispersive spectroscopy analyses confirmed that the dopant cations segregate along the grain boundaries without forming an amorphous phase. The doping effect on the sinterability of Y₂O₃ must result from the change in the diffusivity in Y₂O₃.     

Return Link Systems for Wireless Mobile Camera Using 42 GHz-Band with Frequency and Space Diversity Techniques

In this paper, return link systems for wireless mobile camera using 42 GHz-band in multipath fading environments are proposed. The return link systems for wireless mobile camera require wireless transmission with high reliability as same as the conventional wired camera systems. The proposed return link systems achieve transmission with high reliability by taking into consideration frequency and space diversity techniques. The proposed systems can be classified as 3 three types of return link systems according to diversity techniques： FD （frequency diversity） systems, SD （space diversity） systems and FD＋SD system （frequency and space diversity）. Computer simulations are carried out in order to confirm the effectiveness of the proposed return link systems. It is confirmed that the proposed three types of return link systems have an advantage about BER performances and effectively exploit frequency and space resources.     

Adaptive Playout Buffer Algorithm for Enhancing Perceived Quality of Streaming Applications

An end-to-end packet delay in the Internet is an important performance parameter, because it heavily affects the quality of real-time applications. In the current Internet, however, because the packet transmission qualities (e.g., transmission delays, jitters, packet losses) may vary dynamically, it is not easy to handle a real-time traffic. In UDP-based real-time applications, a smoothing buffer (playout buffer) is typically used at a client host to compensate for variable delays. The issue of playout control has been studied by some previous works, and several algorithms controlling the playout buffer have been proposed. These studies have controlled the network parameters (e.g., packet loss ratio and playout delay), not considered the quality perceived by users. In this paper, we first clarify the relationship between Mean Opinion Score (MOS) of played audio and network parameters (e.g., packet loss, packet transmission delay, transmission rate). Next, utilizing the MOS function, we propose a new playout buffer algorithm considering user's perceived quality of real-time applications. Our simulation and implementation tests show that it can enhance the perceived quality, compared with existing algorithms.     

Corrosion Behavior of Sialon Ceramics in Supercritical Water

The corrosion behavior of sialon ceramics was investigated in supercritical water at 450°C under 45 MPa for 2–50 h. α-sialon exhibited better corrosion resistance than β-sialon and α/β-sialon. Pitting corrosion with the formation of corrosion products was observed in the case of β-sialon and α/β-sialon. By contrast, the corrosion behavior of α-sialon was characterized by uniform corrosion with the formation of corrosion products. The degree of strength deterioration was strongly dependent on the corrosion morphology. The bending strength of α-sialon after corrosion for 30 h was about 90% of its initial strength, while the strength of β-sialon decreased to 65% of its original strength.     

Preparation and Properties of Glass-Ceramics Derived from Nitrogen-Containing β-Spodumene Glasses

Crystallization of Li-Al-Si-O-N oxynitride glasses based on the β-spodumene composition and the properties of the resultant glass-ceramics have been studied. The onset of the precipitation of metastable high-quartz solid solution and its transformation to β-spodumene shift to higher temperatures with increasing nitrogen content of the oxynitride glasses. Nitrided glass-ceramics crystallized at 1200°C have negative thermal expansion coefficients, since high-quartz structure is maintained up to 1000° and 1200°C. Knoop hardness and density of the glass-ceramics increase with increasing nitrogen content. There was evidence that part of the nitrogen atoms were incorporated into the high-quartz solid-solution structure and that a small amount of the minor phase of Si₂N₂O was precipitated in highly nitrided glass-ceramics.     

Surface resistance of superconducting leads at 6.5 GHz

The quality factor (Q value) of a cylindrical TEO11 mode lead cavity has been measured at 6.5 GHz in the temperature range 1.4–4.2 K. Lead was electroplated on a copper substrate. The temperature dependence of the surface resistance derived from the Q measurements has been compared with the semi-empirical formula of Pippard and the microscopic formula of Abrikosov, Gorkov and Khalatnikov (AGK). The plot fit is better with AGK. In this way, the normalized residual resistance (5.0 ± 0.2) × 10^?4 and the energy gap Δ(0) = (4.30 ± 0.05)kT_c was obtained.     

The role of numerical simulation for the development of an advanced HIFU system

High-intensity focused ultrasound (HIFU) has been used clinically and is under clinical trials to treat various diseases. An advanced HIFU system employs ultrasound techniques for guidance during HIFU treatment instead of magnetic resonance imaging in current HIFU systems. A HIFU beam imaging for monitoring the HIFU beam and a localized motion imaging for treatment validation of tissue are introduced briefly as the real-time ultrasound monitoring techniques. Numerical simulations have a great impact on the development of real-time ultrasound monitoring as well as the improvement of the safety and efficacy of treatment in advanced HIFU systems. A HIFU simulator was developed to reproduce ultrasound propagation through the body in consideration of the elasticity of tissue, and was validated by comparison with in vitro experiments in which the ultrasound emitted from the phased-array transducer propagates through the acrylic plate acting as a bone phantom. As the result, the defocus and distortion of the ultrasound propagating through the acrylic plate in the simulation quantitatively agree with that in the experimental results. Therefore, the HIFU simulator accurately reproduces the ultrasound propagation through the medium whose shape and physical properties are well known. In addition, it is experimentally confirmed that simulation-assisted focus control of the phased-array transducer enables efficient assignment of the focus to the target. Simulation-assisted focus control can contribute to design of transducers and treatment planning.