Selective catalytic reduction of nitric oxide by propane over vanadia-titania aerogels

An investigation has been carried out of the effect of vanadia loading on the activity and selectivity ofV₂O₅TiO₂ aerogel catalysts, prepared by a two-step procedure, for the reduction of NO by propane. The structure of catalysts have been characterized by laser Raman spectroscopy and XRD measurements. At vanadia loading levels below ca. 4.4 wt%, the vanadia is present in the form of coordinated polymeric species, whereas crystallites of V₂O₅ are formed at higher vanadia contents. At this critical level of 4.4 wt% V₂O₅, the kinetic measurements showed also a maximum in the activity per mass of catalyst which very likely indicated that the coordinated polymeric surface species are more active than crystalline V₂O₅. The selectivity towards the formation of dinitrogen decreased as the loading increased, presumably because of the formation of larger polymeric species and V₂O₅ crystallites, below and above the critical loading level, respectively. For the reduction of NO by propane, titania supported vanadia aerogel catalysts are significantly more active, per mass of catalyst, and more selective towards N₂ formation than conventionalV₂O₅TiO₂ and V₂O₅Al₂O₃ aerogel catalysts, at vanadia loading levels below ca. 11 wt%.     

Reactivity of steam in exhaust gas catalysis III. Steam and oxygen/steam conversions of propane on a Pd/Al2O3 catalyst

A 1% Pd catalyst (38% dispersion) was prepared by impregnating a γ-alumina with palladium acetylacetonate dissolved in acetone. The behaviour of this catalyst in oxidation and steam reforming (SR) of propane was investigated. Temperature-programmed reactions of C₃H₈ with O₂ or with O₂ + H₂O were carried out with different stoichiometric ratios S(S =[O₂]/5[C₃H₈]). The conversion profiles of C₃H₈ for the reaction carried out in substoichiometry of O₂ (S < 1) showed two discrete domains of conversion: oxidation at temperatures below 350°C and SR at temperatures above 350°C. The presence of steam in the inlet gases is not necessary for SR to occur: there is sufficient water produced in the oxidation to form H₂ and carbon oxides by this reaction. Contrary to what was observed with Pt, an apparent deactivation between 310 and 385°C could be observed with Pd in oxidation. This is due to a reduction of PdO_x into Pd⁰, which is much less active than the oxide in propane oxidation. Steam added to the reactants inhibits oxidation while it prevents the reduction of PdO_x into Pd⁰. Compared to Pt and to Rh, Pd has a higher thermal resistance: no deactivation occurred after treatment up to 700°C and limited deactivation after treatment up to 900°C, provided that the catalyst is maintained in an oxygen-rich atmosphere during the cooling.     

橡塑共混热塑性弹性体的形态结构与性能

综述了影响共混热塑性弹性体的形态结构与性能的主要因素。     

壳聚糖／聚丙烯酸钠聚离子复合膜的醇－水渗透汽化分离性能

研究了壳聚糖－醋酸溶液与聚丙烯酸钠溶液形成的复合膜用于水－乙醇混合物的渗透汽化分离，在膜组成Ｃ＝０．８０时，分离系数出现最大值，对异丙醇－水体系的分离系数为∞。溶解－扩散过程对渗透汽化过程起着重大作用。由－ＮＨ＋３…ＯＯＣ－交联的聚离子复合膜对醇－水体系具有稳定的分离性能。     

贝利阀在氨厂运行情况简介

介绍贝利阀在试车及试生产期间出现的问题及解决办法，指出维护过程中应注意的事项。     

国产活性炭在合成气净化中的应用

选择国产Ｋ０１活性炭脱除羰基铁、镍，以达到保护铑催化剂并减少副产物的目的。１年的实际应用结果表明：国产Ｋ０１活性炭能够替代进口活性炭在合成气净化中应用。     

可编程控制器在化肥散运系统上的应用

整个散运系统采用３台ＦＸ２－１２８ＭＲＰＬＣ分块控制后，使得控制结构清楚，线路简单，工作可靠性大为提高，对所有控制柜元器件进行数据库管理，极大地提高图表的准确率。     

电子自旋共振在橡胶研究中的应用

综述了电子自旋共振在橡胶的合成、加工和应用领域的应用现状及其发展前景。     

NH_4Cl水溶液在成膜过程中的致孔作用

本文以ＮＨ４Ｃｌ饱和水溶液做添加剂，对ＰＶＤＦ／ＮＭＰ体系在成膜过程中的致孔作用做了研究。铸膜液中随ＮＨ４Ｃｌ水溶液加入量的改变，膜孔径也发生变化，并出现最大值。通过Ｘ－射线衍射扫描发现制膜液中存在无机盐时膜中无定形态结构增加，表明无机盐的加入有助于膜孔形成     

一种高温蓄冷介质蓄放冷特性的应用研究

采用实验的方法获得了氯酸锂共晶盐的蓄放冷特性的实用关系式。这种介质的融点为８℃，单位体积蓄冷量比冰大３０％，适于用作空调系统中的蓄冷材料。