温度采集仪调理电路的isp实现技术

介绍温度采集仪调理电路的结构及工作原理,简单介绍在系统可编程模拟器件ispPAC10的基本结构,并借助于PAC Designer软件详细描述ispPAC10实现温度采集仪数据放大器具体方法和步骤。与传统的模拟电路设计方法相比,运用isp技术实现的温度采集仪调理电路具有简洁可靠、开发周期短等特点。     

Study on the Complexity of the Bullwhip Effect

Recent years have witnessed a rapid growth of interest in the study of the dynamic behavior of replenishment rules of bullwhip effect. We prove that bullwhip effect and butterfly effect share a same the self-oscillation amplifying mechanism that is the ordering decisions the supplier self-oscillation amplify the perturbations brought by the errors in the processing of retailers' demand information. This results as an explicit self-similar structure of the sensitivity of the system to the initial values duty to the nonlinear mechanism. In this paper, the causes process of the bullwhip effect is described as the internal nonlinear mechanism and study on the complexity of bullwhip effect for order-up-to policy under demand signal processing. The methodology is based on fractal and chaotic theory and allows important insights to be gained about the complexity behavior of bullwhip effect.     

Ca掺杂钨镁酸铅陶瓷材料的制备及其介电性能

研究了Ca掺杂钨镁酸铅(PMW)陶瓷材料的合成、结构、烧结以及介电性能。结果发现：在Ca^2 摩尔分数小于15％时，能形成单相的PCMW钙铁矿相，结构由原来的斜方相向立方相转变。用二步合成法制备的样品容易致密烧结，气孔率比一步法制备的样品小。Ca的加入降低了材料的介电损耗，在频率为1MHz时，介质损耗达到了10^-4。当Ca^2 摩尔分数大于10％时，材料的Curie峰宽化显著，介电常数温度系数降低。     

组合结构体的控制爆破拆除

根据待拆构筑物的结构特点和周围环境，分析论述构件倒塌的可能性。因地制宜选择，制定出合理的爆破方案。并通过对爆破参数，起爆网络，安全防护等进行精心设计和施工，拆除爆破达到了预期的效果。     

亚麻织物无醛免烫整理工艺研究

采用多元羧酸聚合型无醛免烫整理剂处理亚麻织物，确立了整理剂、催化剂、添加剂用量等最佳工艺条件，整理后亚麻织物的免烫性能得到了明显的改善。     

垂直磁记录介质薄膜研制的新途径(英文)

本文阐述了铝氧化电沉积法获得磁记录材料的基本原理,研究了铝交流氧化膜中沉积磁性金属及其合金制备垂直磁记录薄膜的新途径,建立了铝交流氧化电沉积法,探讨了氧化膜的结构和磁特性的关系。     

一类专家模型参考自适应控制

本文将专家系统技术和模型参考自适应控制相结合，提出了一种新的基于专家系统模型参考自适应控制，该系统集智能控制思想与专家技术于一身，从而得到很强的控制律，为验证其有效性，以两关节机器人为对象进行仿真，在有负载扰动情况下，该系统能使机器人跟踪上希望轨迹，其系统响应和鲁棒性优于常规的控制算法。     

Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.     

晋北吕梁群石榴石的特征及指示意义

石榴石是山西岚县袁家村一带-娄烦县出露的吕梁群地层中主要的特征变质矿物，其次为黑云母、十字石等，对这些特征变质矿物进行电子探针的成分分析及其相关计算，并利用不同采样点的矿物对估算该点变质温度和压力，最后得到石榴石的成分变化与变质程度之间的关系，进而阐明了石榴石中成分变化对变质温度与压力的指示意义。     

水溶性油墨用富马酸改性松香树脂的研制

介绍了一种水溶性富马酸改性松香树脂的制备方法 ,选取了较佳的工艺条件 ,本产品经国内几家油墨厂使用 ,结果表明适合水溶性油墨的应用要求