Safety study on HIC containing waste resin with respect to hydrogen release

To explore the behavior of radiolytically produced hydrogen release from the waste resin stored in a high integrated container(HIC), and the mechanism of hydrogen diffusion in a near-surface disposal facility, both experimental studies and numerical simulations were performed through an accelerated irradiation test and simulated disposal, respectively. Results indicated that,100 years after disposal, the highest hydrogen concentration appeared in the cell where the HICs were placed. The volume fraction for different scenarios postulated in the numerical simulation was 2.64% for Scenario 1, 2.28% for Scenario 2, and 3.965% for Scenario 3, all of which are lower than the hydrogen explosion limit of 4.1%. The results indicated that the simulated HIC disposal scheme is safe.     

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

The effects of La₂O₃–Al₂O₃–SiO₂ addition on the thermal conductivity, coefficient of thermal expansion (CTE), Young's modulus and cyclic thermal shock resistance of hot-pressed h-BN composite ceramics were investigated. The samples were heated to 1000 °C and then quenched to room temperature with 1–50 cycles, and the residual flexural strength was used to evaluate cyclic thermal shock resistance. h-BN composite ceramics containing 10 vol% La₂O₃–Al₂O₃ and 20 vol% SiO₂ addition exhibited the highest flexural strength, thermal conductivity and relatively low CTE, which were beneficial to the excellent thermal shock resistance. In addition, the viscous amorphous phase of ternary La₂O₃–Al₂O₃–SiO₂ system could accommodate and relax thermal stress contributing to the high thermal shock resistance. Therefore, the residual flexural strength still maintained the value of 234.3 MPa (86.9% of initial strength) after 50 cycles of thermal shock.     

Interfacial Crystallization of Diacylglycerols Rich in Medium‐ and Long‐Chain Fatty Acids in Water‐in‐Oil Emulsions

The effects of diacylglycerols rich in medium‐ and long‐chain fatty acids (MLCD) on the crystallization of hydrogenated palm oil (HPO) and formation of 10% water‐in‐oil (W/O) emulsion are studied, and compared with the common surfactants monostearoylglycerol (MSG) and polyglycerol polyricinoleate (PGPR). Polarized light microscopy reveals that emulsions made with MLCD form crystals around dispersed water droplets and promotes HPO crystallization at the oil‐water interface. Similar behavior is also observed in MSG‐stabilized emulsions, but is absent from emulsions made with PGPR. The large deformation yield value of the test W/O emulsion is increased four‐fold versus those stabilized via PGPR due to interfacial crystallization of HPO. However, there are no large differences in droplet size, solid fat content (SFC), thermal behavior or polymorphism to account for these substantial changes, implying that the spatial distribution of the HPO crystals within the crystal network is the driving factor responsible for the observed textural differences. MLCD‐covered water droplets act as active fillers and interact with surrounding fat crystals to enhance the rigidity of emulsion. This study provides new insights regarding the use of MLCD in W/O emulsions as template for interfacial crystallization and the possibility of tailoring their large deformation behavior. Practical Applications: MLCD is applied in preparing W/O emulsion. It is found that MLCD forms unique interfacial Pickering crystals around water droplets, which promote the surface‐inactive HPO nucleation at the oil‐water interface. Thus MLCD‐covered water droplets act as active fillers and interact with surrounding fat crystals, which can greatly enhance the rigidity of emulsion. This observation would provide a theoretical reference and practical basis for the application of the MLCD with appreciable nutritional properties in lipid‐rich products such as whipped cream, shortenings margarine, butter and ice cream, so as to substitute hydrogenated oil. MLCD‐stabilized emulsions can also be explored for the development of novel confectionery products, lipsticks, or controlled release matrices.     

Thermoplastic and low dielectric constants polyimides based on BPADA-BAPP

ABSTRACT

The thermoplastic and low dielectric constants polyimides were introduced. The polyimides were prepared by pyromellitic dianhydride (PMDA) or 4,4?-(4,4?-Isopropylidenediphenoxy)diphthalic anhydride (BPADA) as anhydride monomer and 4,4?-oxydianiline (ODA) or 2,2-bis(4-(4-aminephenoxy)phenyl)propane (BAPP) as amine monomer. The polyimides were well characterized by FT-IR, thermogravimetric analysis, dynamic thermomechanical analysis, dielectric measurement, and tensile test. The dielectric constants were 2.32–2.95 compared with 3.10 of ODA-PMDA polyimide, while partly polyimides were thermoplastic. The results indicated anhydride monomers, containing lateral methyl groups, made polyimides become thermoplastic. The results of molecular simulations via Materials Studio also proved this conclusion.     

Analysis of Phytochemical Composition of Camellia oleifera Oil and Evaluation of its Anti-Inflammatory Effect in Lipopolysaccharide-Stimulated RAW 264.7 Macrophages

In China, Camellia oleifera oil (COO) is not only a common edible oil but also a traditional remedy widely applied to ameliorate a variety of illnesses associated with inflammation, such as mouth ulcers, thrush, eczema, etc. However, there has been a lack of relevant biological research on the anti-inflammatory capacity of COO, and the specific bioactive lipid phytochemicals contributing to the anti-inflammatory effect need further research. In this study, the RAW 264.7 macrophages model was used to investigate the anti-inflammatory capacity of COO. Our data showed that 33–200 μg/mL COO markedly inhibited the lipopolysaccharide lipopolysaccharide (LPS)-stimulated nitric oxide (NO.) secretion via the suppression of Nos2 and Cox-2 expression. The enzyme immunoassay confirmed that COO also exhibited a strong suppressive effect on the expression of proinflammatory cytokines such as Tnf-α and Il-6. To further explore the correlation between the anti-inflammatory effects and the lipid phytochemicals in COO, 10 samples were collected and screened for their chemical compositions. It was interestingly demonstrated that the polyphenol extracts of COO play a vital role in its anti-inflammatory properties. In addition, an oil-in-water (O/W) emulsion-based system was also developed to deliver the liposoluble COO into the cells, and the feasibility of this system was confirmed. Our research confirms the anti-inflammatory potential of COO and highlights that the main functional ingredient is polyphenol extracts. This may provide a scientific basis for the comprehensive utilization and development of COO and related functional foods.     

太赫兹超表面计算全息

全息术是一种三维成像技术,它已经被应用于多种实际场景。随着计算机科学与技术的迅猛发展,计算全息由于其方便和灵活的特性,已经成为一种广泛应用的全息成像方法。本文回顾了我们近期基于超表面的太赫兹计算全息研究进展。其中,作为全息板的超表面展示出了超越传统光学器件的独特性能。首先,利用超表面实现了对于全息板每个像素的相位振幅同时且独立的调控,进而实现了高质量全息成像。这种新的电磁波操控能力也带来了新的全息成像效果,如利用介质超表面实现了全息像沿传播方向上的连续变化。其次,对超表面在不同偏振态下的响应进行设计,分别实现了线偏振态与频率复用、圆偏振态复用、以及基于表面波的偏振复用超表面全息术。此外,本文提出了依赖于温度变化而主动可控的超表面全息术,为今后计算全息术的设计与实现提供了新的方案,也推动了超表面在实际应用方面的发展。     

湖北省保康县荆山玉地球化学特征及其成因分析

荆山玉是湖北省保康县新发现的一个玉石品种,形成于大陆边缘—洋盆区过渡带的热水沉积环境,为晚震旦世—早寒武世灯影组的一种硅质角砾岩:原地震碎角砾岩,由角砾和胶结物二部分构成,角砾局部可拼接;角砾成分为早期硅质岩碎裂产物,胶结物除早期硅质岩碎裂产物外,还有少量后期充填的石英、铁质等,受角砾、胶结物颗粒大小、裂隙发育程度不同的影响,后期热液改造程度不同,角砾和胶结物化学成分存在一定的差异,色调与铁质有关。荆山玉的形成主要经历了三个阶段的演化:第一阶段,低温150～225℃、弱氧化—弱还原条件下热水成因的硅质岩形成;第二阶段,热力膨胀外力作用下,硅质岩局部原地震碎形成硅质角砾岩,热水温度243～340℃,富氧氧化—贫氧过渡环境,红褐色的Fe~(3+)在胶结物、裂隙中富集;第三阶段,热水温度116～127℃、缺氧还原条件,黄色的Fe~(2+)在胶结物、裂隙中富集。     

Excellent Mechanical and Transparency Properties of Cationic Waterborne Polyurethane Films Modified by Boehmite Sol

The strategies for nanosol from metal alkoxide have enabled production of ultratransparent and mechanically robust polymer nanocomposites at extremely high loading. Herein, a simple approach to fabricate high‐performance polyurethane‐based nanocomposites via unmodified boehmite nanoparticles is reported. Evaluating their physical properties, the uniform dispersion of boehmite in the matrix caused nanocomposites retains ultrahigh transparency. Hydrogen bonding and intermolecular entanglement between boehmite and polyurethane brings about the mechanical properties of the nanocomposites material enhanced, i.e., strength, stiffness, and toughness. Optimized strength, stiffness, and toughness of Boehmite/Cationic waterborne polyurethane at 40 wt% (BNC40) are up to 58.1 MPa, 1096.7 MPa, 249.5 MJ m^?3, respectively. Furthermore, the feasibility and mechanism of polymer strengthening and toughening by inorganic rigid nanoparticles is explored from the aspects of crystallinity and micromorphology.     

Synthetic Peroxides Promote Apoptosis of Cancer Cells by Inhibiting P-Glycoprotein ABCB5

This article discloses a new horizon for the application of peroxides in medical chemistry. Stable cyclic peroxides are demonstrated to have cytotoxic activity against cancer cells; in addition a mechanism of cytotoxic action is proposed. Synthetic bridged 1,2,4,5-tetraoxanes and ozonides were effective against HepG2 cancer cells and some ozonides selectively targeted liver cancer cells (the selectivity indexes for compounds 11 b and 12 a are 8 and 5, respectively). In some cases, tetraoxanes and ozonides were more selective than paclitaxel, artemisinin, and artesunic acid. Annexin V flow-cytometry analysis revealed that the active ozonides 22 a and 23 a induced cell death of HepG2 by apoptosis. Further study showed that compounds 22 a and 23 a exhibited a strong inhibitory effect on P-glycoprotein (P-gp/ABCB5)-overexpressing HepG2 cancer cells. ABCB5 is a key player in the multidrug-resistant phenotype of liver cancer. Peroxides failed to demonstrate a direct correlation between oxidative potential and their biological activity. To our knowledge this is the first time that peroxide diastereoisomers have been found to show stereospecific antimalarial action against the chloroquine-sensitive 3D7 strain of Plasmodium falciparum. Stereoisomeric ozonide 12 b is 11 times more active than stereoisomeric ozonide 12 a (IC₅₀=5.81 vs 65.18 μm ). Current findings mean that ozonides merit further investigation as potential therapeutic agents for drug-resistant hepatocellular carcinoma.     

降雨入渗对非饱和土体边坡稳定性影响及治理对策

为研究降雨入渗对非饱和土体边坡稳定性影响，基于饱和—非饱和渗流理论，分析了降雨入渗条件下边坡内部渗流场变化及其对边坡稳定性的影响。研究表明：①降雨入渗是饱和—非饱和过程，其内部体积含水率随降雨持续时间的变化而发生动态改变，在降雨初期，土体处于非饱和状态，黏聚力随着含水率的增大而增大，内摩擦角变化幅度较小，总体呈下降趋势，基质吸力增强，安全系数升高，对边坡稳定性有利；②随着降雨持续，孔隙水压力由负变正，黏聚力和内摩擦角随着含水率的增大而减小，基质吸力减弱，边坡稳定性降低；③降雨入渗终态过程为内部水位线升高，动静水压增加，土体有效重度降低，土体发生软化，力学强度参数降低，边坡稳定性随之降低，土体渗透系数与边坡安全系数总体成反比关系。在上述分析的基础上，结合土质边坡实例，应用强度折减法，分析了降雨入渗状态下边坡潜在滑动面、峰值位移随降雨持续时间的变化规律，认为降雨初期潜在滑动面由浅入深，峰值位移不断增大；降雨停止后，土体内部应力重新分布，土体由饱和转为非饱和，潜在滑动面、峰值位移发生逆变化。为防止降雨条件下边坡发生失稳破坏，针对性地提出了土质边坡治理建议，为非饱和土体边坡综合治理提供了有益参考。